Refine
Year
- 2021 (210) (remove)
Publication Type
- Article (210) (remove)
Keywords
- Partizipation (4)
- plant-based diet (4)
- Corona (3)
- Unternehmensberichterstattung (3)
- Bewässerung (2)
- immaterielle Werte (2)
- Überflutung (2)
- Abwasserreinigung (1)
- Acetic Acid (1)
- Adipositas (1)
Faculty
- Gesundheit (MDH) (48)
- Chemieingenieurwesen (CIW) (32)
- Sozialwesen (SW) (32)
- Wirtschaft (MSB) (22)
- Physikingenieurwesen (PHY) (20)
- Oecotrophologie · Facility Management (OEF) (16)
- Energie · Gebäude · Umwelt (EGU) (14)
- IBL (6)
- Maschinenbau (MB) (5)
- Bauingenieurwesen (BAU) (3)
- Elektrotechnik und Informatik (ETI) (3)
- keine Zuordnung (3)
- Center for Real Estate & Organization Dynamics (2)
- ITB (2)
- Kompetenzzentrum Humanitäre Hilfe (2)
- iSuN Institut für Nachhaltige Ernährung (2)
- Architektur (MSA) (1)
- Chemieingenieurwesen (1)
- Institut für Nachhaltige Ernährung und Ernährungswirtschaft - iSuN (1)
- Wandelwerk. Zentrum für Qualitätsentwicklung (1)
Purpose. Experience suggests that a loss of trust may occur on both sides of the merger and acquisition (M&A) equation – acquirer and acquiree – though the latter is more generally considered the most affected. The purpose of this paper is to explore how a loss of trust during the M&A process in family firms can be avoided. An acquisition potentially triggers a loss of trust in the workplace and, as a result, a loss of productivity thereby causing the merged business to totter. Moreover, trust in a firm’s owner tends to be a key driver in merging family firms.
Design/methodology/approach. The authors investigated an expanding German family firm that recently acquired other family firms. They conducted in-depth interviews on all hierarchical levels in both the acquiring and the acquired firm. These cases are taken from a wider study of acquiring family firms completed in 2019.
Findings. Value congruence, integrity and openness are found to enhance trust during M&As, in particular, if the new owner of a merged enterprise is also a family entrepreneur. Under certain circumstances, the trust of employees in the acquired firm’s previous owner can be transferred to the new owner.
Originality/value. This study explores how specific circumstances of family firms impacts organizational trust in M&A processes. The developed framework helps family firms to use characteristics of their specific nature as an asset to maintain their employees’ organizational trust before, during and even after M&As.
About 75% of the world's energy consumption takes place in cities. Although their large energy consumption attracts a large number of research projects, only a small fraction of them deal with approaches to model energy systems of city districts. These are particularly complex due to the existence of multiple energy sectors (multi-energy systems, MES), different consumption sectors (mixed-use), and different stakeholders who have many different interests.
This contribution is a review of the characteristics of energy system models and existing modeling tools. It evaluates current studies and identifies typical characteristics of models designed to optimize MES in mixed-use districts. These models operate at a temporal resolution of at least 1 h, follow either bottom-up or hybrid analytical approaches and make use of mixed-integer programming, linear or dynamic.
These characteristics were then used to analyze minimum requirements for existing modeling tools. Thirteen of 145 tools included in the study turned out to be suitable for optimizing MES in mixed-use districts. Other tools where either created for other fields of application (12), do not include any methodology of optimization (39), are not suitable to cover city districts as a geographical domain (44), do not include enough energy or demand sectors (20), or operate at a too coarse temporal resolution (17). If additional requirements are imposed, e.g. the applicability of non-financial assessment criteria and open source availability, only two tools remain.
Overall it can be stated that there are very few modeling tools suitable for the optimization of MES in mixed-use districts.
Male juveniles in segregated poor neighbourhoods are at increased risk of violence. The code of the street approach is commonly used to understand the context informing street violence in such marginalized spaces, but the concept is mainly used in Western countries, especially in African American communities in the US. This study investigates whether the code of the street is also applicable to the largest Roma neighbourhood in Europe, located in Bulgaria, through guided interviews with male juveniles. The results show that some elements of the code work are applicable in this space, but clear differences also emerge. These findings affect the generalizability of the approach and the understanding of street violence.
In einvernehmlich nicht monogamen Beziehungen (ENMB) sind Menschen mit mehr als einer Person in einer (sexuellen und/oder emotionalen) Intimbeziehung verbunden. Vermehrt nehmen Personen, die in ENMB leben (wollen), psychosoziale Angebote in Anspruch. Damit Berater*innen angemessen auf deren Beratungsanliegen reagieren können, werden konkrete Empfehlungen für die therapeutische Arbeit formuliert. Die Empfehlungen basieren auf veröffentlichten Fallstudien, die bisher fast ausschließlich in englischer Sprache vorliegen, sowie der Beratungspraxis des Autors. Dadurch soll ein Beitrag zu einer besseren psychosozialen Versorgung von Menschen geleistet werden, die einvernehmlich nicht monogam leben (wollen).
Die Corona-Rechnung
(2021)
Progress in materials development is often paced by the time required to produce and evaluate a large number of alloys with different chemical compositions. This applies especially to refractory high-entropy alloys (RHEAs), which are difficult to synthesize and process by conventional methods. To evaluate a possible way to accelerate the process, high-throughput laser metal deposition was used in this work to prepare a quinary RHEA, TiZrNbHfTa, as well as its quaternary and ternary subsystems by in-situ alloying of elemental powders. Compositionally graded variants of the quinary RHEA were also analyzed. Our results show that the influence of various parameters such as powder shape and purity, alloy composition, and especially the solidification range, on the processability, microstructure, porosity, and mechanical properties can be investigated rapidly. The strength of these alloys was mainly affected by the oxygen and nitrogen contents of the starting powders, while substitutional solid solution strengthening played a minor role.
Cross-saturation of the gain media in intra-cavity pumped lasers leads to complex dynamics of the laser power. We present experimental results and a detailed theoretical analysis of this nonlinear dynamics for an intra-cavity pumped Yb:YAG thin-disk laser in the framework of a rate-equation model. The gain medium of this laser is residing in the resonator of a conventional, diode-pumped Yb:YAG thin-disk laser. Continuous-wave operation, periodic pulse trains, and chaotic fluctuations of the optical power of both lasers were observed. The dynamics is not driven by external perturbations but arises naturally in this laser system. Further examination revealed that these modes of operation can be controlled by the resonator length of the diode-pumped laser but that the system can also show hysteresis and multi-stability.
This work deals with the spectroscopic properties of praseodymium doped single crystalline lutetium aluminum garnet (LuAG:Pr3+). A special focus was set on temperature- and time-dependent spectroscopy. Beyond the well-known down-conversion luminescence of LuAG:Pr3+, also UV-A/B up-conversion luminescence under excitation with a 488 nm laser was thoroughly investigated. Furthermore, the results of the spectroscopic investigations on the single crystalline material were supplemented and compared with measurements on a microscale powder sample.
In addition, to the spectroscopic investigations, mechanistic considerations are presented to obtain a closer look at the up-conversion process in LuAG:Pr3+. We promote the thesis of a temperature-dependent energy transfer up-conversion mechanism.
The laser nitriding was performed in nitrogen gas at room temperature (20 °C) and low temperature (−190 °C) by a low power fiber laser to modify the wear and abrasion resistance of NiTi alloy. The surface roughness and element composition were analyzed by roughness device and energy-dispersive X-ray spectroscopy respectively. The results of roughness show that laser treatment can change the surface roughness due to the laser remelting. The effect of laser nitriding on the microhardness, friction coefficient, and worn scars of NiTi alloy was also studied, which shows that the microhardness of the NiTi alloy increases after laser nitriding. The optical microscope and scanning electron microscope were used to characterize the surface of NiTi alloy after wear testing to observe the microstructure of worn scars. The results show that the laser nitriding with different parameters can induce a nitride layer with different thicknesses and the higher energy deposition is the key factor for the formation of the nitride layer, which can decrease the friction coefficient and reduce wear loss during the application of NiTi alloy. The improvement of wear resistance can be attributed to the hard nitriding layer.
We experimentally study the occurrence of pattern formation during the slot-die coating of low-viscosity nearly Newtonian liquids onto Polyethylenterephthalat (PET)-substrates. In particular, it is demonstrated that with increase of the coating speed a homogeneous coating becomes unstable with respect to periodic stripe patterns. Thereby, depending on the liquid viscosity, the stripes can be oriented parallel or perpendicular with respect to the coating direction. Mixed states do also occur. The spatial period of perpendicular [parallel] stripes increases [decrease] with the coating speed. The dependence of the effect on various control parameters of slot-die coating is investigated. Finally, a simple theoretical model based on the hydrodynamics of thin films of partially wetting liquids is analysed. Comparing the results to the experiments, conclusions are drawn regarding the acting instability and pattern formation mechanisms.
Purpose:
Industrial revolutions have been induced by technological advances, but fundamentally changed business and society. To gain a comprehensive understanding of the fourth industrial revolution (I4.0) and derive guidelines for business strategy, it is, therefore, necessary to explore it as a multi-facet phenomenon. Most literature on I4.0, however, takes up a predominantly technical view. This paper aims to report on a project discussing a holistic view on I4.0 and its implications, covering technology, business, society and people.
Design/methodology/approach:
Two consecutive group discussions in form of academic world cafés have been conducted. The first workshop gathered multi-disciplinary experts from academia, whose results were further validated in a subsequent workshop including industry representatives. A voting procedure was used to capture participants perspectives.
Findings:
The paper develops a holistic I4.0 vision, focusing on five core technologies, their business potential, societal requests and people implications. Based on the model a checklist has been developed, which firms can use a tool to analyze their firm’s situation and draft their industry 4.0 business strategy.
Originality/value:
Rather than focusing on technology alone – which by itself is unlikely to make up for a revolution – this research integrates the entire system. In this way, a tool-set for strategy design results.
Gemeinkosten lassen sich oft nur schwer verursachungsgerecht über eine innerbetriebliche Leistungsverrechnung Kostenträgern zuordnen. Die zunehmende Digitalisierung schafft eine Datengrundlage, auf deren Basis eine Allokation der Kosten entsprechend ihrer tatsächlichen Inanspruchnahme erfolgen kann, indem Prozesse als Kostentreiber
genauer betrachtet werden.
Effect of a 6-Month Controlled Lifestyle Intervention on Common Carotid Intima-Media Thickness
(2021)
Background. Ketone bodies are a highly relevant topic in nutrition and medicine. -e influence of medium-chain triglycerides (MCT) on ketogenesis is well known and has been successfully used in ketogenic diets for many years. Nevertheless, the effects of MCTs and coconut oil on the production of ketone bodies have only partially been investigated. Furthermore, the increased mobilisation of free fatty acids and release of catabolic hormones by caffeine suggest an influence of caffeine on ketogenesis.
Methods. In a controlled, double-blind intervention study, seven young healthy subjects received 10mL of tricaprylin (C8), tricaprin (C10), C8/C10 (50% C8, 50% C10), or coconut oil with or without 150 mg of caffeine, in 250mL of decaffeinated coffee, over ten interventions. At baseline and after every 40 minutes, for 4 h, ßHB and glucose in capillary blood as well as caffeine in saliva were measured. Furthermore, questionnaires were used to survey sensory properties, side effects, and awareness of hunger and satiety. Results. -e interventions with caffeine caused an increase in ßHB levels—in particular, the interventions with C8 highly impacted ketogenesis. -e effect decreased with increased chain lengths. All interventions showed a continuous increase in hunger and diminishing satiety. Mild side effects (total � 12) occurred during the interventions. Conclusions. -e present study demonstrated an influence of caffeine and MCTon ketogenesis. -eaddition of caffeine showed an additive effect on the ketogenic potential of MCT and coconut oil. C8 showed the highest ketogenicity.
Different from negatively charged CuInS2 (CIS) based quantum dots (QDs), positively charged QDs are difficult to obtain in good optical quality, but are desirable for certain applications. We herein present a general synthesis strategy that allows for a universal surface modification of ternary CIS based QDs with thiol containing ligands.
The idea behind the synthesis design is, to apply a ZnS shell first for passivating and protecting the core QDs, and then add a second ZnS shell for the functionalization via ligand exchange. Whereby easy ligand exchange with thiolated molecules is systematically set up, by using a weak bonding amine ligand for the second shell. Molecules with various terminal groups were used to functionalize the nanoparticles and stabilize them in different media making any surface charge and polarity accessible. Surface defect chemistry seemed to play an important role in our synthesis strategy, therefore to gain a deeper understanding how these defect sites can alter the electronic structure of core/shell nanoparticles theoretical calculations based on density functional theory were performed, whilst structural, colloidal and optical properties were characterized experimentally (by dynamic light scattering, x-ray diffraction, infrared spectroscopy, zeta potential, absorption- and (time resolved) photoluminescence
measurements).
(1) Background: Schools report a high number of schoolchildren with poor attention and hyperactive behavior, with 5% being diagnosed with attention deficit/hyperactivity disorder (ADHD). This causes specific problems during homework and classroom times, and the extension of all-day schooling in German primary schools makes this a challenge for support staff working in the after-school programs. Such staff have a very wide variety of qualifications, ranging from no formal teacher training to full teaching qualifications. (2) Methods: This study documents the knowledge of 196 support staff working in all-day primary schools about ADHD, and their subjective view of whether they feel competent with regard to homework situations in general and ADHD in particular. (3) Results: Those with an educational background have significantly more knowledge than those without such a background, staff feel less prepared to supervise children with ADHD, and there is a small but significant correlation here with knowledge about ADHD. (4) Conclusions: The importance of trained pedagogical staff in the supervision of children with concentration problems is emphasized.
ALPACA: Application Layer Protocol Confusion - Analyzing and Mitigating Cracks in TLS Authentication
(2021)
Teaching and learning in international and thus intercultural contexts places special demands on the conception of trainings. The same holds true for online or distance learning. Taken together, both factors – training in an intercultural and online context – pose specific didactic and technical challenges. Against the background of the COVID-19 pandemic all international training programmes under the umbrella of the Higher Education Management Programme at FH Münster –University of Applied Sciences had to be held online. In the article on hand we share our experiences with online training for actors in the higher education area from developing and emerging countries and discuss its specific demands along the lines of common criteria for effective learning.
Ab 2023 gelten in der EU neue Mindeststandards für die Wiederverwendung von aufbereitetem Abwasser – und damit auch in Deutschland. International ist die Wasserwiederverwendung schon länger ein relevantes Thema. Weltweites Bevölkerungswachstum und ein damit einhergehender steigender Wasserbedarf sowie die Folgen des globalen Klimawandels verringern zunehmend die Verfügbarkeit von Süßwasserressourcen. Aufbereitetes Abwasser kann ein wertvoller Ersatz für natürliche Wasserressourcen sein. Der aktuelle DWA-Themenband „Non-Potable Water Reuse – Development, Technologies and International Framework Conditions for Agricultural, Urban and Industrial Uses“ behandelt das breite Spektrum der Wasserwiederverwendung für Nutzungen, bei denen keine Trinkwasserqualität erforderlich ist. Der vorliegende Beitrag bietet einen Überblick über die im Themenband beschriebene Herangehensweise an die Wasserwiederverwendung und die damit verbundenen Herausforderungen.