Energie · Gebäude · Umwelt (EGU)
Refine
Year
- 2023 (15) (remove)
Publication Type
- Article (6)
- Report (5)
- Conference Proceeding (3)
- Part of Periodical (1)
Has Fulltext
- yes (15) (remove)
Keywords
- renewable energy (3)
- Hochwasser (1)
- Klimawandel (1)
- PSH (1)
- PSHP (1)
- Trockenheit (1)
- UPSH (1)
- UPSHP (1)
- decentralized storm water retention system (1)
- energy analysis (1)
Faculty
The Spreadsheet Energy System Model Generator (SESMG) is a tool for modeling and optimizing energy systems with a focus on urban systems. The SESMG is easily accessible as it comes with a browser-based graphical user interface, spreadsheets to provide data entry, and detailed documentation on how to use it. Programming skills are not required for the installation or application of the tool. The SESMG includes advanced modeling features such as the application of the multi-energy system (MES) approach, multi-objective optimization, model-based methods for reducing computational requirements, and automated conceptualization and result processing of urban energy systems with high spatial resolution. Due to its accessibility and the applied modeling methods, urban energy systems can be modeled and optimized with comparatively low effort.
Stormwater tree pits with storage elements enable the irrigation of urban trees and can potentially act as decentralized rainwater retention basins. This paper mainly focuses on analyzing this potential. Field tests were conducted to investigate the irrigation behavior and the storage effect of a storm water tree pit system using Perl hoses as irrigation elements over a period of two years.
The rainfall, storage volumes, and soil moisture within the employed planting pit were measured.
With the help of system modeling, the retention ability of the storm water tree pit system was analyzed. The available storage volume was sufficient to irrigate trees for several days. During the measurement period, about 15% of the inflowing rainwater was fed to the root zone of the tree. With practical storage volumes of 200 to 300 m3/ha, a remarkable amount of water from heavy rainfall could be completely stored, thus significantly reducing the risk of flooding. The retention effect and irrigation behavior largely depend on the soil conditions and the technical possibilities of the equipment supplying the root area (in this case, Perl hoses). Further investigations are required to determine the influence on the growth conditions of trees and optimize of the system for discharge into the root zone.
This review paper presents a short overview of current power system modelling tools especially used for analysing energy and electricity systems for the supply and demand sector. The main focus of this review lies on open source tools and models which are written and used in the programming language “Python”. The modelling tools are represented in a comprehensive table with key information. Five modelling tools with an open source license can be filtered out. The modelling tool PyPSA can be considered as a high performing tool especially as the gap between power system analysis tool (PSAT) and energy system modelling tool.
The use of wind power is rapidly expanding worldwide. It is important to examine the impact of wind turbines on the environment to see if they provide a net benefit and to identify potential for improving. Therefore life cycle assessments (LCA) of different wind turbine types are compared in this short review. The results are then shown side by side in tables for comparison. Overall the LCAs show that wind turbines compensate the required energy and emitted pollutants after approx. 6-16 months. The energy payback period (EPP) for 2 MW onshore wind turbines remained roughly the same since 2009 with approximately 7 months. Onshore wind turbines have a higher impact due to emissions but a shorter EPP than offshore wind turbines. The estimated service life of 20 years should be maximized to ensure a high energy yield ratio. The biggest impact on the environment results from the processes to provide the building material e.g. steel and cement. That impact could be reduced by 20 % if recycled steel would be used. It is shown that wind power is one of the cleanest energy sources. But further investigations in material processing and recycling are important to improve the eco-balance of wind turbines.