Gurevich, Evgeny
Refine
Year
Publication Type
- Article (79)
- Conference Proceeding (4)
- Part of a Book (2)
Keywords
- Additive manufacturing (1)
- High-entropy alloy (1)
- Laser metal deposition (1)
- Laser shock peeningFemtosecond laserNiTi alloyCorrosion behaviorLaser surface treatment (1)
- Powder blend (1)
- Refractory (1)
- laser mode locking; polymerisation; optical waveguides; high-speed optical techniques; two-photon processes; optical pulse compression; optical saturable absorption; integrated optics; semiconductor lasers (1)
- laser nitriding; wear resistance; NiTi alloy; roughness; microhardness (1)
- laser shock peeningfemtosecond laserNiTi alloymicrohardness (1)
Two-photon polymerization with diode lasers emitting ultrashort pulses with high repetition rate
(2020)
In this Letter, we investigate the resolution of two-photon polymerization (2PP) with an amplified mode-locked external cavity diode laser with adjustable pulse length and a high repetition rate. The experimental results are analyzed with a newly developed 2PP model. Even with low pulse peak intensity, the produced structural dimensions are comparable to those generated by traditional 2PP laser sources. Thus, we show that a compact monolithic picosecond laser diode without amplification and with a repetition rate in the GHz regime can also be applied for 2PP. These results show the high application potential of compact mode-locked diode lasers for low-cost and compact 2PP systems.
Two different scenarios are usually invoked in the formation of femtosecond Laser-Induced Periodic Surface Structures (LIPSS), either “self-organization” mechanisms or a purely “plasmonic” approach. In this paper, a three-step model of formation of single-laser-shot LIPSS is summarized. It is based on the periodic perturbation of the electronic temperature followed by an amplification, for given spatial periods, of the modulation in the lattice temperature and a final possible relocation by hydrodynamic instabilities. An analytical theory of the evolution of the temperature inhomogeneities is reported and supported by numerical calculations on the examples of three different metals: Al, Au, and Mo. The criteria of the possibility of hydrodynamic instabilities are also discussed.
The production of free-standing large aspect ratio metal nanofilms by femtosecond laser separation
(2009)
We demonstrate a new method for the production of free-standing metal films of thickness down to several tens of nanometres. Films of different metals as well as multilayer structures have been produced by means of femtosecond laser-induced separation of evaporated layers from a plane glass surface. This technology enables the production of large-area films with different properties for optical or nanotechnological applications. We study the properties of the film and demonstrate the possibility of high-pass filtering of electrons with an energy of several keV by means of the free-standing films. The physical mechanisms leading to the film separation under femtosecond laser radiation are discussed.
The laser nitriding was performed in nitrogen gas at room temperature (20 °C) and low temperature (−190 °C) by a low power fiber laser to modify the wear and abrasion resistance of NiTi alloy. The surface roughness and element composition were analyzed by roughness device and energy-dispersive X-ray spectroscopy respectively. The results of roughness show that laser treatment can change the surface roughness due to the laser remelting. The effect of laser nitriding on the microhardness, friction coefficient, and worn scars of NiTi alloy was also studied, which shows that the microhardness of the NiTi alloy increases after laser nitriding. The optical microscope and scanning electron microscope were used to characterize the surface of NiTi alloy after wear testing to observe the microstructure of worn scars. The results show that the laser nitriding with different parameters can induce a nitride layer with different thicknesses and the higher energy deposition is the key factor for the formation of the nitride layer, which can decrease the friction coefficient and reduce wear loss during the application of NiTi alloy. The improvement of wear resistance can be attributed to the hard nitriding layer.
Synthesis of Magnetic Nanoparticles by Ultrashort Pulsed Laser Ablation of Iron in Different Liquids
(2017)
This research paper presents the attempt at ultrashort pulsed laser shock peening with absence of absorptive layer and confining medium which could enhance surface microhardness and the abrasion property of NiTi shape memory alloy. The average roughness values of NiTi specimen were measured on the surface, because the roughness would affect the friction resistance. The microhardness and Young's modulus were investigated at different position of single laser spot by nanoindentation technique. The pin-on-plate sliding abrasion testing were performed with different load-force (0.5 N and 2 N) for different testing time. Results showed that ultrashort pulsed laser shock peening treatment would cause a significant improvement on friction coefficient and abrasion property, which was attributed to the change of surface modification, such as roughness, microhardness, microstructure and titanium oxide layer …
Studies on ultra-short pulsed laser shock peening of stainless-steel in different confinement media
(2020)
We investigate the role of liquid confinement media on ultra-short pulsed Laser Shock Peening (LSP). The LSP of stainless-steel 316 and 316 L was studied using Ti: Sapphire laser pulses of about 2 ps duration, maximum energy of about 1 mJ and pulse repetition rate of 5 kHz in different liquid confinement media of Ethanol, Deionized water and separate aqueous solutions of NaCl and Glycerol. It is found that the laser fluence and/or energy attenuating mechanisms like self-focusing, filamentation, plasma breakdown in the confinement media are less significant with ps laser pulses than those with sub-ps or fs pulse durations. It is shown that the resulting surface hardness of the peened steel as a function of laser fluence depends significantly on the confinement media and the relative increase in the hardness increases monotonically with the acoustic impedance of the liquid of the confinement medium used during …
This paper describes how two-photon polymerization was used to generate biomimetic nanostructures with angle-insensitive coloration inspired by the blue butterflies of Morpho. Less angle dependence was achieved by engineering the structures with a certain degree of disorder, which delimited them from classical photonic crystals. Variations in the processing parameters enabled the color hue to be controlled. In this context, blue, green, yellow, and brown structures were demonstrated. Reflection spectra of the structures were simulated and studied experimentally in a broad range of incident angles. Additionally, a molding technique was performed as a potential scale-up strategy. The application of such biomimetic structures is discussed.
Silicon microprotrusions with tailored chirality enabled by direct femtosecond laser ablation
(2020)
Here, we report on formation of nanoprotrusions on the surface of a bulk crystalline silicon wafer under femtosecond-laser ablation with a donut-shaped laser beam. By breaking circular symmetry of the irradiating donut-shaped fs-pulse beam, a switch in geometry of the formed surface nanoprotrusions from regular to chiral was demonstrated. The chirality of the obtained Si nanostructures was promoted with an asymmetry degree of the laser beam. An uneven helical flow of laser-melted Si caused by asymmetry of the initial intensity and temperature pattern on the laser-irradiated Si surface explains this phenomenon. Chirality of the formed protrusions was confirmed by visualizing cross-sectional cuts produced by focused ion beam milling as well as Raman activity of these structures probed by circularly polarized light with opposite handedness. Our results open a pathway towards easy-to-implement inexpensive …
The need for portable and on site screening methods for viruses is evident in face of virus infections that can spread lastly in a heavily connected world. A robust and efficient method for detecting viruses is a novel technique called Plasmon Assisted Microscopy of Nanoobjects. It is based on the acquisition of images from a sensor surface exploiting the behavior of surface plasmons in the presence of nanoobjects. In this paper an efficient image analysis approach with respect to the requirements of the sensor is presented and an embedded image processing system for this purpose is introduced. The processing pipeline comprises three steps and starts with restorating the images by removing the background and filtering artifacts. The acquired image series is analyzed pixel by pixel in a second pipeline step in order to detect pixels containing nanoobjects. In a last step pixels are aggregated to nanoobject structures. The paper introduces in the context of this virus detection method a configurable embedded system that was used for rapid prototyping of the image analysis algorithms in a flexible way. (C) 2010 Elsevier B.V. All rights reserved.
Current self-sustained oscillations in a Townsend discharge are studied analytically. The proposed method for solving simple equations is applicable even when the Townsend coefficient of electron reproduction g (the main factor governing the oscillations) cannot be determined theoretically. The coefficient g is related to the discharge current-voltage characteristic, which can be obtained experimentally or from numerical simulations. Self-oscillating solutions (limit cycles) are found under various conditions. The mechanisms governing the excitation and stabilization of the solutions obtained are interpreted. It is shown that the waveform of the undamped oscillations may change significantly (the current peaks are smoothed, and the oscillation period decreases) when a weak constant cathode current, which is presumably related to the emission caused by slowly diffusing metastable molecules, is included in the equations.
Self-sustained current oscillations in a Townsend discharge that is excited in a short plane discharge gap and is uniform along the electrode surface are investigated experimentally. A thin semiconductor plane serves as a discharge cathode, a ballast resistor, and an additional capacitor in the dc power supply circuit. The domain of existence and the frequency and waveform, of oscillations are determined over a wide pressure range.
In this work, the authors report on investigations of two-photon lithography of positive photoresist. The dependency of the pattern linewidth on variation in the processing parameters, like the laser patterning velocity or power of the femtosecond laser oscillator, is presented. The influence of the scan velocity between 0.38 and 1.90 mm/s on the resolution is discussed for a layer thickness of 3.5 μm. By using a commercial positive photoresist, an aspect ratio of 5 has been realized for grid structures and the qualities of the produced structures are discussed.
Redistribution of deep selenium and sulfur impurities in silicon upon surface doping with phosphorus
(2009)
The study is concerned with the effect of short-term high-temperature heating on Si:Se and Si:S samples, whose surface layers are doped with phosphorus to high concentrations. It is found that the resistivity of the wafers substantially increases deep in the bulk within up to similar to 10 mu m. The experimental data suggest that this effect is due to enhanced diffusion of chalcogen in the presence of the phosphorus-doped surface region. The mechanism of the effect is the injection of nonequilibrium interstitial silicon atoms from the layer heavily doped with phosphorus to the bulk of the sample. This results in a shift of the equilibrium between the concentrations of substitutional and interstitial impurity atoms towards higher concentrations of interstitials and, as a consequence, towards the increase in the relative content of the fast-diffusing interstitial component of the impurity.
In this manuscript, a new approach in surface plasmon resonance microscopy is presented. The method provides optical real-time detection of single nanoparticles on surfaces. The potential of the method is demonstrated recording spherical dielectric particles as small as 40 nm in diameter and single HIV virus-like particles having diameters of similar to 100 nm both immobilized on functionalized surfaces. The surface plasmon resonance signal in the binding spots was found to be almost linearly proportional to the size of the particles and, therefore, surpasses the intensity of Mie scattering on spherical particle (dependence similar to r(-6)) by orders of magnitude for small objects. The physical reason leading to this strong effect is discussed.
The potential use of an EMG-20 mass-spectrometric gas analyzer for process control and safe operation and environmental monitoring in metallurgy (oxygen converter process) is considered. The EMG-20 parameters are adequate for rapid, automatic on-line analysis of metallurgical waste gases. A multichannel system of sampling. sample preparation, and transportation of sampled gases for analysis is proposed.
We experimentally study the occurrence of pattern formation during the slot-die coating of low-viscosity nearly Newtonian liquids onto Polyethylenterephthalat (PET)-substrates. In particular, it is demonstrated that with increase of the coating speed a homogeneous coating becomes unstable with respect to periodic stripe patterns. Thereby, depending on the liquid viscosity, the stripes can be oriented parallel or perpendicular with respect to the coating direction. Mixed states do also occur. The spatial period of perpendicular [parallel] stripes increases [decrease] with the coating speed. The dependence of the effect on various control parameters of slot-die coating is investigated. Finally, a simple theoretical model based on the hydrodynamics of thin films of partially wetting liquids is analysed. Comparing the results to the experiments, conclusions are drawn regarding the acting instability and pattern formation mechanisms.
In this study, we use a hybrid mode-locked external cavity diode laser with subsequent amplification and pulse compression. The system provides laser pulses of 440 fs width (assuming a sech² pulse shape) and 160 mW average output power at a repetition rate of 383.1 MHz. The laser oscillator consists of a double quantum well laser diode with a gain segment of 1080 μm length and an absorber element of 80 μm lengths. The chip’s back facet is covered with a high reflective coating, the front facet with an anti-reflective coating. The resonator itself is operated in a collimated geometry and folded by two dielectric mirrors. The used output coupler provides a transmission of 20 percent, which is coupled into a tapered amplifier. Two Faraday isolators are used to decouple the laser and the amplifier from any back reflections. Subsequently, the pulses are compressed using a single pass Martinez type pulse compressor …
In this Letter, the authors present the construction of three-dimensional microstructures by two-photon polymerisation induced by ultrashort pulses of a mode-locked diode laser. The ultrafast light source is based on a diode laser with segmented metallisation to realise a waveguide integrated saturable absorber. It is subsequently amplified and compressed resulting in ultrashort laser pulses of 440 fs length and average output power of 160 mW at a fundamental repetition rate of 383.1 MHz. These pulses are coupled into a customised two-photon polymerisation setup. A series of suspended lines were fabricated between support cuboids for testing the process behaviour. A 3D structure with complex features was polymerised to demonstrate the high potential for mode-locked diode lasers in the field of direct laser writing.
The experiment study presents the influence of femtosecond laser shock peening (FsLSP) without a protective layer in the air on the surface hardness and surface mechanical property of NiTi shape memory alloy. Femtosecond laser shock peening is a new possibility of direct laser ablation without any protective layer under atmospheric conditions, which can produce intense shock waves with low pulse energy in the air. The average surface roughness values of the NiTi alloy samples were measured, because the surface roughness may affect its friction resistance. The results showed that the surface roughness of NiTi increased after femtosecond laser shock peening treatment. In comparison with the initial state, the coefficient of friction decreased and surface microhardness increased after femtosecond laser shock peening treatment with different FsLSP parameters. This improvement of wear properties may be attributed to the enhancement of surface microhardness and surface titanium oxide layer induced by the shock wave and laser ablation during FsLSP treatment.
Nanoscale hydrodynamic instability of ring-like molten rims around ablative microholes produced in nanometer-thick silver and gold films by tightly focused nanosecond (ns) laser pulses was experimentally explored in terms of laser pulse energy and film thickness. These parametric dependencies of basic instability characteristics - order and period of the resulting nanocrowns - were analyzed, revealing its apparently Rayleigh-Plateau character, as compared to much less consistent possible van der Waals and impact origins. Along with fundamental importance, these findings will put forward ns pulsed laser ablation as an alternative facile inexpensive table-top approach to study such hydrodynamic instabilities developing at ns temporal and nanometer spatial scales as well as to produce unique plasmon-active hierarchical surface morphologies applicable for chemo- and biosensing.
High strength steel has been used in the aviation industry and automotive body structural applications to reduce its mass through a reduction in thickness. Therefore, it is very important to enhance its mechanical property, such as microhardness. In the present research, the high strength steel samples were treated by laser shock peening (LSP) with different laser pulse energy and laser pulse width. The microhardness and residual stress were measured to compare the difference between laser energy of 3 J with 10 ns and 5 J with 20 ns. The results in the study show that the surface LSP treatment can increase the microhardness and the compressive residual stress can be found when the samples were tested by hole drilling testing.
Three-dimensional porous nanostructures made of noble metals represent novel class of nanomaterials promising for nonlinear nanooptics and sensors. Such nanostructures are typically fabricated using either reproducible yet time-consuming and costly multi-step lithography protocols or less reproducible chemical synthesis that involve liquid processing with toxic compounds. Here, we combined scalable nanosecond-laser ablation with advanced engineering of the chemical composition of thin substrate-supported Au films to produce nanobumps containing multiple nanopores inside. Most of the nanopores hidden beneath the nanobump surface can be further uncapped using gentle etching of the nanobumps by an Ar-ion beam to form functional 3D plasmonic nanosponges. The nanopores 10–150 nm in diameter were found to appear via laser-induced explosive evaporation/boiling and coalescence of the randomly arranged nucleation sites formed by nitrogen-rich areas of the Au films. Density of the nanopores can be controlled by the amount of the nitrogen in the Au films regulated in the process of their magnetron sputtering assisted with nitrogen-containing discharge gas.
Progress in materials development is often paced by the time required to produce and evaluate a large number of alloys with different chemical compositions. This applies especially to refractory high-entropy alloys (RHEAs), which are difficult to synthesize and process by conventional methods. To evaluate a possible way to accelerate the process, high-throughput laser metal deposition was used in this work to prepare a quinary RHEA, TiZrNbHfTa, as well as its quaternary and ternary subsystems by in-situ alloying of elemental powders. Compositionally graded variants of the quinary RHEA were also analyzed. Our results show that the influence of various parameters such as powder shape and purity, alloy composition, and especially the solidification range, on the processability, microstructure, porosity, and mechanical properties can be investigated rapidly. The strength of these alloys was mainly affected by the oxygen and nitrogen contents of the starting powders, while substitutional solid solution strengthening played a minor role.