Gurevich, Evgeny
Refine
Year
Publication Type
- Article (79)
- Conference Proceeding (4)
- Part of a Book (2)
Keywords
- Additive manufacturing (1)
- High-entropy alloy (1)
- Laser metal deposition (1)
- Laser shock peeningFemtosecond laserNiTi alloyCorrosion behaviorLaser surface treatment (1)
- Powder blend (1)
- Refractory (1)
- laser mode locking; polymerisation; optical waveguides; high-speed optical techniques; two-photon processes; optical pulse compression; optical saturable absorption; integrated optics; semiconductor lasers (1)
- laser nitriding; wear resistance; NiTi alloy; roughness; microhardness (1)
- laser shock peeningfemtosecond laserNiTi alloymicrohardness (1)
Two-photon polymerization with diode lasers emitting ultrashort pulses with high repetition rate
(2020)
In this Letter, we investigate the resolution of two-photon polymerization (2PP) with an amplified mode-locked external cavity diode laser with adjustable pulse length and a high repetition rate. The experimental results are analyzed with a newly developed 2PP model. Even with low pulse peak intensity, the produced structural dimensions are comparable to those generated by traditional 2PP laser sources. Thus, we show that a compact monolithic picosecond laser diode without amplification and with a repetition rate in the GHz regime can also be applied for 2PP. These results show the high application potential of compact mode-locked diode lasers for low-cost and compact 2PP systems.
Two different scenarios are usually invoked in the formation of femtosecond Laser-Induced Periodic Surface Structures (LIPSS), either “self-organization” mechanisms or a purely “plasmonic” approach. In this paper, a three-step model of formation of single-laser-shot LIPSS is summarized. It is based on the periodic perturbation of the electronic temperature followed by an amplification, for given spatial periods, of the modulation in the lattice temperature and a final possible relocation by hydrodynamic instabilities. An analytical theory of the evolution of the temperature inhomogeneities is reported and supported by numerical calculations on the examples of three different metals: Al, Au, and Mo. The criteria of the possibility of hydrodynamic instabilities are also discussed.
The production of free-standing large aspect ratio metal nanofilms by femtosecond laser separation
(2009)
We demonstrate a new method for the production of free-standing metal films of thickness down to several tens of nanometres. Films of different metals as well as multilayer structures have been produced by means of femtosecond laser-induced separation of evaporated layers from a plane glass surface. This technology enables the production of large-area films with different properties for optical or nanotechnological applications. We study the properties of the film and demonstrate the possibility of high-pass filtering of electrons with an energy of several keV by means of the free-standing films. The physical mechanisms leading to the film separation under femtosecond laser radiation are discussed.
The laser nitriding was performed in nitrogen gas at room temperature (20 °C) and low temperature (−190 °C) by a low power fiber laser to modify the wear and abrasion resistance of NiTi alloy. The surface roughness and element composition were analyzed by roughness device and energy-dispersive X-ray spectroscopy respectively. The results of roughness show that laser treatment can change the surface roughness due to the laser remelting. The effect of laser nitriding on the microhardness, friction coefficient, and worn scars of NiTi alloy was also studied, which shows that the microhardness of the NiTi alloy increases after laser nitriding. The optical microscope and scanning electron microscope were used to characterize the surface of NiTi alloy after wear testing to observe the microstructure of worn scars. The results show that the laser nitriding with different parameters can induce a nitride layer with different thicknesses and the higher energy deposition is the key factor for the formation of the nitride layer, which can decrease the friction coefficient and reduce wear loss during the application of NiTi alloy. The improvement of wear resistance can be attributed to the hard nitriding layer.
Synthesis of Magnetic Nanoparticles by Ultrashort Pulsed Laser Ablation of Iron in Different Liquids
(2017)
This research paper presents the attempt at ultrashort pulsed laser shock peening with absence of absorptive layer and confining medium which could enhance surface microhardness and the abrasion property of NiTi shape memory alloy. The average roughness values of NiTi specimen were measured on the surface, because the roughness would affect the friction resistance. The microhardness and Young's modulus were investigated at different position of single laser spot by nanoindentation technique. The pin-on-plate sliding abrasion testing were performed with different load-force (0.5 N and 2 N) for different testing time. Results showed that ultrashort pulsed laser shock peening treatment would cause a significant improvement on friction coefficient and abrasion property, which was attributed to the change of surface modification, such as roughness, microhardness, microstructure and titanium oxide layer …
Studies on ultra-short pulsed laser shock peening of stainless-steel in different confinement media
(2020)
We investigate the role of liquid confinement media on ultra-short pulsed Laser Shock Peening (LSP). The LSP of stainless-steel 316 and 316 L was studied using Ti: Sapphire laser pulses of about 2 ps duration, maximum energy of about 1 mJ and pulse repetition rate of 5 kHz in different liquid confinement media of Ethanol, Deionized water and separate aqueous solutions of NaCl and Glycerol. It is found that the laser fluence and/or energy attenuating mechanisms like self-focusing, filamentation, plasma breakdown in the confinement media are less significant with ps laser pulses than those with sub-ps or fs pulse durations. It is shown that the resulting surface hardness of the peened steel as a function of laser fluence depends significantly on the confinement media and the relative increase in the hardness increases monotonically with the acoustic impedance of the liquid of the confinement medium used during …
This paper describes how two-photon polymerization was used to generate biomimetic nanostructures with angle-insensitive coloration inspired by the blue butterflies of Morpho. Less angle dependence was achieved by engineering the structures with a certain degree of disorder, which delimited them from classical photonic crystals. Variations in the processing parameters enabled the color hue to be controlled. In this context, blue, green, yellow, and brown structures were demonstrated. Reflection spectra of the structures were simulated and studied experimentally in a broad range of incident angles. Additionally, a molding technique was performed as a potential scale-up strategy. The application of such biomimetic structures is discussed.