Refine
Year
Publication Type
- Conference Proceeding (81) (remove)
Keywords
- Echtzeitanalyse (2)
- Liner (2)
- AFS/AFS63 (1)
- Altrohrschäden (1)
- Altrohrzustand III (1)
- Argos (1)
- Belastungsfahrzeug (1)
- Belastungsversuche (1)
- Bodenspannungen (1)
- Dezentrale Anlagen (1)
Faculty
- Bauingenieurwesen (BAU) (81) (remove)
Wastewater Generation Model to Predict Impacts of Urine Separation on Wastewater Treatment Plants
(2023)
Wastewater treatment plants are under increasing pressure to enhance resource efficiency and reduce emissions into water bodies. Separation of urine within the catchment area may be an alternative to mitigate the need for costly expansions of central wastewater treatment plant. While previous investigations assumed a spatially uniform implementation of urine separation across the catchment area, the present study introduces a modelling framework which allows to determine the influence of targeted urine separation on the operation and emissions of central wastewater treatment plants. The framework includes an adapted stochastic wastewater generation model, the Stormwater Management Model, and Activated Sludge Model No. 3 with Bio-P module (SIMBA#). The entire application is embedded in the R programming language. The model is validated by an extensive sampling and measurement campaign. Preliminary results based on observed and simulated wastewater generation and transport for a catchment area of 436 residents indicate the suitability of the model for wastewater generation and transport modelling, but also show further need for calibration.
Im Zuge des Klimawandels wird der landwirtschaftliche Bewässerungsbedarf auch in Deutschland zukünftig steigen. Die EU-Verordnung 2020/741 stellt Mindestanforderungen an die Wiederverwendung weitergehend aufbereiteten kommunalen Abwassers zur landwirtschaftlichen Bewässerung, um die Nutzung natürlicher Wasserressourcen hierfür zu begrenzen. Die EU-Verordnung wird am 26. Juni 2023 Gültigkeit erlangen und soll in Deutschland in das Wasserhaushaltsgesetz eingebettet und um eine neue Bundesverordnung ergänzt werden. Zentrales Element der Wasserwiederverwendung wird der für jeden Einzelfall zu erstellende Risikomanagementplan sein, der der Minimierung möglicher hiermit verbundener Risiken dient. Als Hilfestellung für die praktische Umsetzung von Wasserwiederverwendung wird die DWA die Merkblattreihe M-1200 veröffentlichen.
Vorgehensweise zur Bewertung der Absetzwirkung von Regenbecken auf Basis eines „Beckenfaktors“
(2023)
The Gaulwerk hydropower plant (HPP) has a design discharge of 3.5 m3/s and generates about 6.5 GWh per year. The HPP has been in operation since 1963 and uses the flow of two alpine streams. The HPP impounds a 300 m long reservoir with a 6.50 m high weir. The storage is completely filled with sediments and is classified as a valuable habitat for fauna and flora. Due to the sedimentation, the area upstream of the reservoir head inundates about two to three times per year during small flood events, leading to complaints from affected landowners and adjacent municipalities. To investigate sustainable solutions, a study of alternatives has been carried out in which three alternatives to im-prove both the sediment and flood situation are being investigated. In addition, the residual flow release will be adjusted and fish facilities realized in all alternatives. The paper will summarize the analysis of the alternatives encompassing the (1)
flood situation, (2) sediment management, (3) reha-bilitation measures of the hydraulic structures and their costs and (4) the environmental impact.
Der Behandlung von Niederschlagsabflüssen aus Trennsystemen kommt zur Zielerreichung eines wirksamen Gewässerschutzes eine wesentliche Rolle zu. Konventionelle, zentrale Anlagen behandeln den Abfluss vor der Einleitung in das Gewässer. Zunehmend an Bedeutung gewonnen haben dezentrale Anlagen, die den Abfluss am Entstehungsort behandeln. Unterschiedlich belastete Oberflächenabflüsse können somit den wasserrechtlichen Anforderungen entsprechend gezielt behandelt werden. Voraussetzung zur Anwendung ist der Nachweis der vergleichbaren Reinigungsleistung zu zentralen Anlagen. In-situ Gütemessungen der Zu- und Ablauffrachten einer Behandlungsanlage ermöglichen eine datenbasierte Bewertung der Anlagenwirksamkeit.
The in-situ performance of large decentralised stormwater treatment systems is investigated by means of continuous turbidity measurements. Turbidity measurements are used as a surrogate to continuously estimate Total Suspended Solid (TSS) concentrations. TSS event loads are calculated at the inlet and outlet of two stormwater treatment systems, which both are installed at the outlet of catchments with high pollution potential. The event-specific performance is defined as ratio between TSS loads of inflow and outflow. Based on measurement data obtained, the overall TSS load retention efficiency is about 32 %.
The water balance of urban areas differs considerably from the landscape water balance. Increased surface runoff, reduced groundwater recharge and evaporation change the hydrological regime, the morphology and ecology of water bodies close to the cities, the groundwater in the urban area and the urban climate. Today's urban drainage systems are designed to prevent, reduce, drain, seep away, evaporate or discharge precipitation into nearby surface waters with considerable delays. In doing so, it follows the principles of the German Water Resources Act (WHG) and the objectives of the relevant technical regulations DWA-A 102 to keep changes in the natural water balance by settlement activities as low as ecologically, technically and economically acceptable. A reference for the "natural" water balance has to be defined as a planning objective in order to quantify the hydrological changes in settlements. As a suitable reference, we propose to use the water balance of the landscape of the associated ecoregion with today's cultural land use without urban developments. This approach is more suitable to define local conditions than the water balance of the enclosed catchment. The presented calculation approach to define reference values of the water balance, uses soil and geological properties, precipitation and climate data and can be implemented and applied uniformly throughout Germany. The water balances in this study are simulated with the water balance model RoGeR. In this study, the developed approach is applied for five locations in Germany.
Im Rahmen einer nachhaltigen Stadtentwicklung wird der Vegetation die
Funktion der Beschattung und Verdunstung zugesprochen. Der Stadthydrologie fehlte hierfür bislang ein geeignetes Simulationsmodell. Der entwickelte Modellbaustein SWMM-UrbanEVA erlaubt die standortgerechte Simulation der Verdunstung von Vegetation im urbanen Raum. Für Freiflächen erfolgt die Prozessmodellierung des Energie- und Wasserhaushaltes des Systems Boden-Pflanze-Atmosphäre. Mit meteorologischen und vegetationskundlichen Kenndaten wird eine raum-zeitlich differenzierte Berechnung ermöglicht.
In this paper typical bypass efficiencies of sediment bypass tunnels (SBTs) used to counter reservoir sedimentation are described, distinguishing between two layouts of the tunnel intake. It results that SBTs are an effective measure to reduce the sedimentation of dam reservoirs, particularly of type (A) with intake at the reservoir head. The hydroabrasive wear of tunnel inverts is significant and
has to be mitigated by using adequate invert liners. The invert abrasion can be estimated based on an abrasion model where a correct input value of the bed material resistance coefficient is paramount to limit model uncertainties. Based on abrasion measurements at prototype SBTs typical values of the material resistance coefficient are recommended for high-strength concrete, natural stones and steel liners. The field experiences gathered so far and the comparison of various invert materials suggest granite pavers as a promising lining material for severe abrasion conditions.
Bedload transport and hydro-abrasive erosion at steep bedrock rivers and hydraulic structures
(2018)
In-situ-Monitoring der Reinigungsleistung großer dezentraler Niederschlagswasserbehandlungsanlagen
(2018)
Große dezentrale Niederschlagswasserbehandlungsanlagen
werden mittels kontinuierlicher Gütemesstechnik hinsichtlich ihrer
Frachtwirkungsgrade an Standorten mit hohem Stoffaufkommen untersucht.
Die Bilanzierung der Zulauf- und Ablauffrachten basiert auf dem Zusammenhang
zwischen den abfiltrierbaren Stoffen (AFS) und der Trübung.
Erste Ergebnisse der Installation der Messtechnik, des Datenmanagements
und Frachtwirkungsgrade werden vorgestellt.
BIM Interdisziplinär
(2018)
Without adequate measures, reservoirs are not sustainable, neither the
reservoir itself due to continuous sedimentation, nor the downstream ecosystem due to altered sediment continuity. Appropriate actions are inevitable and require a systematic sedimentation management. Sediment bypassing constitutes one effective strategy that routes sediment load around reservoirs during floods. A sediment bypass system has the advantage that only newly entrained sediment is diverted from the upstream to the downstream reach thereby re-establishing sediment connectivity. Hence, such a system contributes to a sustainable water resources management while taking the downstream environment into consideration. This paper gives a state-of-the-art overview
encompassing design, bypass efficiency, hydraulics, challenges due to abrasion, positive effects on both downstream morphology and ecology, and makes design recommendations.
This paper describes the design of the new tunnel invert lining of the 9-foot tunnel at Mud Mountain Dam, Washington, USA. The tunnel diverts all bed load sediments into the tailwater. Major invert abrasion has been observed in the existing steel lining. The new invert design consists of 0.59 m2 and 0.79 m2 granite blocks that are 0.25 m thick and placed tightly together along the tunnel. Stability analysis showed factors of safety ranging from 1.2 to 2.6 against uplift. This will be achieved with strip drains placed in the bedding material along the tunnel. A service-design-life analysis was performed using abrasion prediction modelling.
This model was based on abrasion measurement data acquired from granite field tests at Pfaffensprung sediment bypass tunnel, Switzerland. The estimated annual abrasion depths for the granite were approximately 0.50 mm/year for average sediment transport conditions.
Due to high bedload sediment transport, many sediment bypass tunnels (SBT) are prone to severe invert abrasion. However, there is little information about the flow characteristics in SBTs after invert abrasion initiated and progresses with time. In the present study, laboratory flume experiments were performed to investigate how the hydraulic conditions change after abrasion patterns developed on the invert. A typical invert abrasion pattern was produced using 3D-printing technique and implemented in the laboratory flume. Flow depths were measured to compare the initial with the abraded state.
Furthermore, turbulence measurements using 2D-laser Doppler anemometry technique were performed to obtain the mean and turbulence flow characteristics. This paper describes results of these measurements focusing on the streamwise and vertical flow velocities, turbulence intensities and Reynolds shear stress.
A major drawback of sediment bypass tunnels is the potential for severe invert abrasion due to intense bedload sediment transport. This paper briefly describes the abrasion phenomena as well as the available models used to predict invert material loss. The application and calibration is demonstrated on the basis of the Mud Mountain sediment bypass tunnel, Washington, USA.
Positive effects of reservoir sedimentation management on reservoir life: Examples from Japan
(2016)
The effectiveness of different strategies against reservoir sedimentation is demonstrated herein using data sets of Asahi, Nunobiki and Dashidaira reservoirs in Japan. The applied strategies encompass
sediment routing with a bypass tunnel, drawdown flushing during floods and sabo dam construction in the catchment. It is shown that bypassing and flushing are very efficient strategies enlarging reservoir life by 3 to 21 times up to many hundreds of years. Furthermore, it is revealed that also efforts in the catchment, e.g. sabo dam construction, is effective enlarging reservoir life by 2.4 times.
Sediment, which deposits and damages the function of reservoirs, is an essential element of aquatic habitats in downstream ecosystems. We reviewed ecosystem features of degraded channels associated with sediment deficiency below dams and ecosystem responses to changes in sediment conditions after management practices in Japan. Sediment bypass tunnel (SBT) is an effective way to transport sufficient amount of sediment to downstream ecosystems. Based on a concept of suitable mass and size of sediment for ecosystem, some effects and limitations of SBT on downstream ecosystems were discussed.
Sediment bypass tunnels are an effective and sustainable strategy against reservoir sedimentation. Sediments are diverted into the down-stream during floods without deposition in the reservoir, hence mor-phological and ecological variability increases. One major drawback of these tunnels is the severe invert abrasion due to a combination of high flow velocities and bedload sediment transport. The abrasion phenom-ena is briefly described, different abrasion prediction models are pre-sented and their applicability for the estimation of concrete abrasion is discussed.
For long term use of dams, it is required to develop methods of sediment management in reservoirs.
As one method, Sediment BypassTunnels (SBT) are operated in Japan and Switzerland to prevent reservoir sedimentation. SBT reduces sedimentation in reservoirs by routing the incoming sediments around the dam. SBT, however, is prone to severe invert abrasion caused by high sediment flux. Therefore, it is necessary to establish a measurement system of sediment transport rates in the SBT. A geophone was experimentally investigated in a laboratory flume at ETH Zurich. The sediment transport rate is calculated based on the plate vibration caused by hitting of gravels. In this paper, in order to alleviate disadvantages of a geophone, two newly developed sensor systems, a plate microphone and plate vibration sensor, are suggested and the results of their calibration experiments are shown. Finally, they are compared with the existing methods.
Sediment Bypass Tunnels are operated to divert sediment around reservoirs reducing reservoir sedimentation. A major drawback of these tunnels is severe invert abrasion due to high velocity and sediment flows. There is an urgent need to establish innovative measurement systems of sediment transport rates in SBTs. In this paper, three bedload measuring systems, namely hydrophones, geophones, and newly developed plate microphones are introduced and compared. The Koshibu SBT is planned to operate from 2016. Plate microphones combined with geophones and other planned systems are installed in the tunnel. Results of preliminary tests and installation plans of bedload
measurement are presented.
To understand the effects of sediment bypass on environmental recovery of the degraded channels below dams, bed topography and bed materials above and below dam reaches were surveyed by ground-based measurements and aerial photos using quadrocopter. Coarse bed materials such as boulders were more represented below than above the Koshibu dam, where the bypass tunnel had not been in operation yet. The coarse materials formed steps and protruded in the water column within riffles and runs, both of which can increase slow-flow areas, below the dam. On the other hand, sand, gravel, and cobbles were abundant below as much as above the Asahi dam, where the bypass tunnel had been operated for >17 years. The downstream environment in terms of bed topography and grain size seems to have almost been recovered for the Asahi dam. However, less representation of large cobbles and boulders below the dam suggested a possibility of a selective deposition of coarse materials at the upstream of the bypass tunnel inlet.
Supercritical sediment-laden open channel flows occur in many hydraulic structures including dam outlets, weirs, and bypass tunnels. Due to high flow velocities and sediment flux severe problems such as erosion and abrasion damages are expected in these structures (Jacobs et al., 2001). Sediment bypass tunnels (SBT), as an effective measure to decrease reservoir sedimentation by bypassing sediments during floods, are exceptionally prone to high abrasion causing significant annual maintenance cost (Sumi et al., 2004; Auel and Boes, 2011). The Laboratory of Hydraulics, Hydrology and Glaciology (VAW) of ETH Zurich conducted a laboratory study to counteract these negative effects (Auel, 2014). The main goals of the project were to analyze the fundamental physical processes in supercritical flows as present in SBTs by investigating the mean and turbulence flow characteristics (Auel et al., 2014a), particle motion (Auel et al., 2014b; 2015b), and abrasion development caused by transported sediment. Besides new insights into the three listed topics, paramount interest is given to their inter-relations and the development of an easily applicable abrasion prediction model (Auel et al., 2015a). This paper presents selected results on the second topic, i.e. the analysis of saltation trajectories of single coarse particles in supercritical flow.
In order to prevent reservoir sedimentation, sediment bypass tunnels can be an efficient countermeasure restoring sediment continuity of impounded rivers. Although supercritical open channel flow conditions in these tunnelsprevent tun-nel blockage, in combination with the high bypassed sediment volume it may lead tosevere abrasion damages on inverts. Consequently,wear termed hydroabra-sionoccurs. Based on laboratoryexperiments, a theoretical model was devel-oped to predict abrasion rates and service life timeof sediment bypass tunnels. Insituexperiments are further conducted for model calibration to provide an abrasion prediction approach for field applications.Finally,recommendations concerning the hydraulic design of the tunnel as well as the structural design ofthe invertareprovided.
The derivation of an abrasion prediction model for concrete hydraulic structures valid in supercritical flows is presented herein. The state of the art saltation-abrasion model from Sklar and Dietrich (2004) is modified using the findings of a recent research pro-ject on the design and layout of sediment bypass tunnels. The model correlates the im-pacting parameters with the invert material properties by an abrasion coefficient kv. The value of this coefficient is verified by a similarity analysis to bedrock abrasion in river systems applying a correlation between the abrasion rate and the bed material strength. A sensitivity analysis reveals that the saltation-abrasion model is highly dependent on an adequate estimation of kv. However, as a first order estimate the proposed model en-ables the practical engineer to estimate abrasion at hydraulic structures prone to super-critical flows.
The Solis dam was built in 1986 by the Electric Power Company of Zurich (ewz). Ever since the construction, large amounts of sediments accumulated in the reservoir and led to severe sediment aggradation. As a consequence, the storage volume was reduced by about 50% till 2012 causing loss of energy production. Additionally, in the near future sediments may have caused severe damage at the dam due to blockage of the bottom outlets. Therefore, in 2011 and 2012 a sediment bypass tunnel was realized in order to redirect the incoming sediments into the tailwater to inhibit sediment aggradation. Since its inauguration, the tunnel was operated four times including a 100-year flood event in August 2014. First operational experiences are described herein.
Worldwide, a large number of reservoirs impounded by dams are rapidly filling up with sediments. As on a global level the loss of reservoir volume due to sedimentation increases faster than the creation of new storage volume, the sustainability of reservoirs may be questioned if no countermeasures are taken. This paper gives an overview of the amount and the processes of reservoir sedimentation and its impact on dams and reservoirs. Furthermore, sediment bypass tunnels as a countermeasure for small to medium sized reservoirs are discussed with their pros and cons. The issue of hydroabrasion is highlighted, and the main design features to be applied for sediment bypass tunnels are given.
Single glass sphere motion recordings were conducted in a transitional-rough bed open channel at steady and highly supercritical flow similar to hydraulic conditions in sediment bypass tunnels. A high speed camera with a maximum resolution of 2,560 × 2,160 pixels was used to record the movement of bedload particles with diameters of D = 5.3, 10.3 and 17.5 mm. An in-house developed Particle Tracking Velocimetry (PTV) program was used to determine the transport mode and velocities of each particle for a wide range of Froude numbers up to Fo = 6. The relative roughness defined as the ratio of the bed roughness height ks to the water depth h varied from ks/h = 0.02–0.03. Particles were observed to move in rolling and saltation modes depending on the Shields number. The particle velocity shows a linearly increasing relationship with both friction velocity and Froude number nearly independent on the particle diameter. A linear relationship was also found between rolling and saltating particle velocities indicating that particle velocity does not depend on the transport mode in the range of the investigated hydraulic conditions. Scaling of particle velocity with the wave celerity plotted as a function of the Froude number adequately merged external data sets with the present data. As a consequence, a linear fit for a large Froude number range was obtained.
This paper deals with an experimental investigation of the mean and turbulence characteristics of supercritical quasi-uniform and gradually varied open-channel flows over a transitional rough bed. These conditions are typical for sediment bypass tunnels. The results show that the log-law holds well in the inner region across the channel. The roughness shifts the velocity profiles downward by an amount of ΔU+. The velocity-dip phenomenon and strong secondary currents exist in the channel for narrow open-channel flow. These currents cause the Reynolds shear stress distributions to deviate from the linear distribution and an undulation on the transversal distribution of the bed shear stress, which matches with the bed abrasion pattern. The streamwise turbulence intensity profiles deviate from the semi-empirical universal function whereas the vertical turbulence intensity profiles fit well with it only at the centerline of the channel. A strong wall effect exists on the turbulence intensities in the outer region.
Reservoir sedimentation is an increasing problem affecting the majority of reservoirs both in Switzerland and worldwide. As many dams are more than 50 years of age, this problem is becoming more and more serious nowadays. Res-ervoir sedimentation leads to various severe problems such as a decisive de-crease of the active reservoir volume leading to both loss of energy production and water available for water supply and irrigation. These problems will intensify in the near future, because sediment supply tends to increase due to climate change. Therefore, countermeasures have to be developed. They can be divided into the three main categories sediment yield reduction, sediment routing and sediment removal. This paper focuses on the sediment routing using sediment bypass tunnels. Sediment bypass tunnels are an effective means to decrease the reservoir sedimentation process. By routing the sediments around the reservoir into the tailwater, sediment accumulation is reduced significantly. However, the number of sediment bypass tunnels in the world is limited primarily due to high investment and maintenance costs. The main problem of all bypass tunnels is the invert abrasion due to high velocities in combination with high sediment transport. Three Swiss bypass tunnel examples suffering invert abrasion are presented in this paper. Furthermore, VAW started a research project to investigate the invert abrasion process by conducting hydraulic scale tests in the laboratory. The goal of this research project is to establish general design criteria for optimal flow con-ditions where both sediment depositions in the tunnel are avoided and the result-ing abrasion damages are kept at a minimum.
Sedimentumleitstollen leiten die sedimentreichen Hochwasserspitzen um die Tal-sperre herum in den Unterlauf des Flusses und verhindern so eine fortschreitende Verlandung des Stauraums. Aufgrund der hohen Fließgeschwindigkeiten und gro-ßen Sedimentfrachten in Umleitstollen weisen diese starke Verschleißerscheinun-gen auf, die zu hohen Unterhaltskosten führen. Es gibt verschiedene Konzepte um diesem Problem entgegen zu wirken. Einerseits kann der Umleitstollen hydrau-lisch optimiert werden, um die Belastung auf die Sohle zu minimieren. Auf der anderen Seite kann der Widerstand der Stollensohle verbessert werden. An der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie (VAW) der ETH Zü-rich werden zur Zeit zwei Forschungsarbeiten durchgeführt, die sich diesen zwei Aspekten widmen. In großskaligen Laborversuchen erfolgt eine systematische Untersuchung und Optimierung der maßgebenden Parameter wie Fortbewegungs-art des Sediments und Abrasionstiefe der Stollensohle. Anhand von Prototypver-suchen im neu errichteten Sedimentumleitstollen Solis in Graubünden (Schweiz) werden die Zusammenhänge zwischen Beanspruchung, Materialeigenschaften und Abrasion im Prototyp ermittelt. Darauf basierend können Empfehlungen be-züglich Materialwahl, konstruktiver Durchbildung und Dimensionierung abgege-ben und so zu einer nachhaltigen und wirtschaftlichen Wasserbewirtschaftung in Stauseen beigetragen werden.
Reservoir sedimentation is increasingly affecting the majority of reservoirs all over the world. As many dams are more than 50 years of age, this problem is becoming more and more seriou403s nowadays. Reservoir sedimentation leads to various severe problems such as a decisive decrease of the active reservoir volume leading to both loss of energy production and water available for water supply and irrigation. These problems will intensify in the very next future, because sediment supply tends to increase due to climate change. Therefore coun-termeasures have to be developed. They can be divided into the three main categories sediment yield reduction, sediment routing and sediment removal. This paper focuses on sediment routing by means of sediment bypass tunnels. Sediment bypass tunnels are an effective measure to stop or at least decrease the reservoir sedimentation process. By routing the sediments around the reservoir into the tailwater in case of flood events sediment accumulation of both bed load and suspended load is reduced significantly. However, the number of sediment bypass tunnels in the world is limited primarily due to high investment and above all maintenance costs. The state-of-the-art design criteria of constructing bypass tunnels are summarized herein; major problems such as tunnel invert abrasion are discussed. The need for further research regarding sediment transport in bypass tunnels and invert abrasion is highlighted.
Reservoir sedimentation, a serious problem affecting the majority of reservoirs worldwide, was not systematically accounted for in the past. After 50 years of operation, a constantly decreasing reservoir volume becomes currently a serious challenge for reservoir owners, against which countermeasures have to be developed. This research focuses on sediment routing using a bypass tunnel to convey sediments past a dam.
By transporting sediments into the tailwater past a dam, their accumulation in the reservoir is reduced significantly. However, the global number of sediment bypass tunnels is limited primarily due to high investment and maintenance cost. The main problem of all bypass tunnels is the massive invert abrasion due to high flow velocities combined with high sediment transport rates. Therefore, VAW started two research projects to counter this problem. The main goal of the first project Layout and design of sediment bypass tunnels is to investigate the invert abrasion process by conducting hydraulic laboratory tests and to establish general design criteria for optimal flow conditions in which both sediment depositions in the tunnel are avoided and the resulting abrasion damages are kept at a minimum. The second project Optimizing hydroabrasive-resistant materials at sediment bypass tunnels and hydraulic structures investigates the hydraulic resistance of different tunnel invert materials, such as high performance concrete or cast basalt plates in prototype tests at the Solis bypass tunnel. The sediment transport measurement technique used in this project was optimized during preliminary model tests.
The Solis reservoir is located in the Alps in Grisons, Switzerland and is operated by the electric power company of Zurich (ewz). Since its construction in 1986, high sediment input during flood events has led to major aggradations in the reservoir. Up to date, nearly half of the original reservoir volume has been filled with sediments from upstream mountain torrents. The deltaic deposition starts extending into the active water volume. Therefore, ewz plans a sediment bypass tunnel to flush the incoming bedload around the dam to the downstream reach. In a first step the reservoir level during flood events is lowered to the minimum operation level. The delta is subjected to free surface flow and the bedload is transported over the delta and deposited further downstream. This sediment relocation decreases the delta volume within the active storage. During further flood events, the incoming sediment is led to the bypass tunnel intake using a guiding structure and flushed through the tunnel. If the flood exceeds the capacity of the bypass tunnel, the surplus flow passes the tunnel intake towards the bottom outlets with the bedload still being flushed through the tunnel. A skimming wall located upstream from the tunnel intake prevents driftwood blocking by leading it to the reservoir front where it can be safely removed. Both the sediment relocation due to water level drawdown and the flushing through the bypass tunnel are investigated and optimized in a hydraulic model at the Laboratory of Hydraulics, Hydrology and Glaciology (VAW) of ETH Zurich. Additionally, the sediment relocation process in the model is compared with a relocation test in the prototype.
In the German design code ATV-M 127-2, three host pipe states are differentiated: State I for leaky sewers without cracks, state II for sewers with longitudinal cracks but a stable soil pipe system, and state III for cracked pipes with larger deformations and considerable risk of collapse in the near future. State II sewers that are close to the traffic surface must be calculated as a state III situation. On the other hand, the US Standard ASTM F 1216 defines two states: structurally safe and fully deteriorated sewers. This paper examines the common aspects and differences between the two codes. A simple non-linear numerical approach is presented to evaluate the actual safety of the host pipe-soil system based on the following parameters: 1. the pipe material (e. g. age, corrosion depth, state of the contact zones), 2. the measured or estimated pipe deformations, 3. the soil group, stiffness, and possible voids occurring next to the springlines of the pipe, 4. the loading to be applied on the deteriorated pipe-soil system. Using stability and ultimate stress criteria, the safety of the system can be defined in a rational way. Missing parameters have to be introduced into the algorithm conservatively. Case studies are presented to demonstrate safe estimations for the host pipe state. The consequences on the required wall thickness of a lining and the application of non-circular linings are shown. The wall thicknesses resulting from a design for the fully deteriorated state as defined by the design codes in both the USA and Germany are compared and discussed.
Entlandung des Stausees Solis mit Hilfe eines Geschiebeumleitstollens – hydraulische Modellversuche
(2009)
Das Reservoir der Talsperre Solis in Graubünden wurde 1986 vom Elektrizitätswerk der Stadt Zürich (ewz) in Betrieb genommen. Bei Hochwasserereignissen werden grosse Sedimentmengen in den Stausee transportiert. Über 25 % des ursprünglichen Reservoirvolumens sind bereits verlandet. Aus diesem Grund plant ewz den Bau eines Geschiebeumleitstollens, der das bei Hochwasser ankommende Sediment um die Talsperre herum in Richtung Unterwasser leitet. Die Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie (VAW) der ETH Zürich untersucht und optimiert in einem hydraulischen Modell den projektierten Umleitstollen. Bei Hochwasser wird der Stausee auf den minimalen Betriebswasserspiegel abgesenkt, der Verlandungskörper liegt grösstenteils frei, das Sediment erodiert. Mit Hilfe einer Leitkonstruktion wird die Strömung in Richtung Einlaufbauwerk des Stollens gelenkt und der Abfluss sowie das Geschiebe durch diesen geleitet. Bei Abflüssen, die die Ausbaukapazität des Stollens (HQ5) überschreiten, wird die überschüssige Strömung in den vorderen Bereich des Sees in Richtung Grundablass abgeführt. Das Geschiebe wird dennoch nahezu vollständig in den Stollen eingeleitet. Bei Hochwasser mit Schwemmholzaufkommen wird mit Hilfe einer Tauchwand sowie einer Teilablleitung des Hochwasserabflusses in den vorderen Seebereich verhindert, dass Schwemmholz in den Umleitstollen
eingezogen wird.
The German Code ATV-M 127-2 published in 2000 for the design of linings to rehabilitate sewers has proved itself a helpful guideline to find the optimum wall thickness of any liner material, e.g. CIPP or stainless steel sleeves. Many rehabilitation projects in different European countries have been performed successfully using this code. The code differentiates between three host pipe states: State I for untight sewers without cracks, state II for sewers with longitudinal cracks but a stable soil pipe system and state III for cracked pipes with larger deformations and considerable risk to collapse in the near future. State II sewers but installed close to the traffic surface must be calculated as a state III situation too. According to the code stress, deformation and stability tests are necessary. For many practical cases charts with stress factors and imperfection reductions allow to design without a computer. Numerous theoretical and experimental papers are available which mainly deal with circular linings. An evaluation of design codes carried out by experts of different countries shows a fairly good coincidence of the required wall thicknesses, but the assessment of pipeline damages by engineers is sometimes resulting in quite different assumptions necessary for the design input parameters. The paper reports about the progress in liner design since the 1st edition of the code. Additional clauses have to be introduced into the 2nd edition for non circular geometries (e.g. for hood and rectangular profile), imperfections describing practical and theoretical situations and new applications (e.g. railway crossings). International discussion can be useful to find safe and resources saving constructions.
With the assessment of sewers and drains generally recognised criteria such as tightness, stability, hydraulic capability and efficiency are valid. For the assessment of the stability, however, there are often uncertainties. In this connection the ATV-DVWK Advisory Leaflet ATV M 127-2 represents a practical development of the system of rules and standards for the stability of earth-bedded pipelines that is called upon in the case of dimensioning for rehabilitation procedures. Nevertheless, further assumptions about the pipe-soil system are necessary which often are based on individual appraisals and experiences of the designer. To that end, in the years 1999 to the beginning of 2002, extensive experiments and theoretical investigations were carried out at the Universities of Bremen and Muenster as well as at the Bremen hanseWasser GmbH in order to assess more reliably the load-carrying capacity in particular of damaged host pipes in the ground. The research was supported by the Federal Ministry for Education and Research (BMB+F) under the short title ASSUR. The paper gives a view of the essential contents of the research; further information can be taken from the final report to ASSUR.