Refine
Year
- 2023 (15) (remove)
Publication Type
- Article (6)
- Report (5)
- Conference Proceeding (3)
- Part of Periodical (1)
Has Fulltext
- yes (15) (remove)
Keywords
- renewable energy (3)
- Hochwasser (1)
- Klimawandel (1)
- PSH (1)
- PSHP (1)
- Trockenheit (1)
- UPSH (1)
- UPSHP (1)
- decentralized storm water retention system (1)
- energy analysis (1)
Faculty
- Energie · Gebäude · Umwelt (EGU) (15) (remove)
The Educational Journal of Renewable Energy Short Reviews (EduJRESR, formally published as `EGU Journal of Renewable Energy Short Reviews') is a teaching project rather than a regular scientific journal. To publish in this journal, it is a premise to take part in the master course wind power, hydro power and biomass usage at the department of Energy, Building Services and Environmental Engineering of the Münster University of Applied Sciences.
Students receive an equivalent of 2.5 credit points (European Credit Transfer and Accumulation System - ECTS) for their engagement in the course and for publishing a short review article of at most 3000 words in this periodical. The publication process closely mimics the typical publication procedure of a regular journal. The peer-review process, however, is conducted within the group of course-participants.
Although being just an exercise, we think that publishing the outcome of this course in a citable manner is not only promoting the motivation of our students, but may also be a helpful source of introductory information for researchers and practitioners in the field of renewable energies. We encourage students to write their articles in English, but this is not mandatory. The reader will thus find a few articles in German language. To further encourage students practicing English writing, perfect grammar is not part of the assessment.
We especially thank our students for working with LaTeX on Overleaf, although LaTeX is new to some of them. In this way, the editorial workload was reduced to a minimum. We also thank our students for sharing their work under the creative commons attribution licence (CC-BY). We appreciate their contribution to scientific information, being available to every person of the world, almost without barriers. We also thank the corresponding authors and publishers of the cited work, for granting permission to reuse graphics free of charge. All other figures had to be replaced or removed prior to publication.
For the increasingly important storage of renewably generated electricity, this review explains the construction of a surface and underground pumped storage
power plant. The problems for the construction of an underground pumped storage power plant are further listed. These are geological, environmental and
economic problems as well as a low acceptance by the population. The geological problems are concerns about leaching of minerals and heavy metals as well as the statics of the cavities. Mining companies in Germany are obligated to renaturalize the landscape areas again, which could be realised by a lake. Furthermore, care must be taken to ensure that the mine water does not come into contact with the groundwater. According to a survey by RISP on the subsequent use of the mine areas for an underground pumped
storage power plant, the acceptance of the population is over 70 percent. The economic consideration concludes that the arbitrage profit for a difference between off-peak and peak of 10 €/MWh is about 2.7 M€/a and for 100 €/MWh about 27.3 M€/a. With investment costs of about 630 M€, despite the assumption of 100 €/MWh, more than 20 years are needed for an underground pumped storage power plant to be amortized. The acceptance could be increased by creating a lake as a recreation area as well as being used as an upper storage reservoir. Thus, the cost of renaturation decrease when combined with the creation of the storage basin. The problem of ground conditions can be solved by creating new cavities by means of tunnel boring at an inclination. For static safety as well as against leaching of minerals and heavy metals, the cavity walls can be sealed with reinforced concrete. The technology of underground pumped storage power plants can be used for better utilisation of renewable energies. This is especially in flat and densely populated regions a possibility to store energy, because the main part of the power plant is underground.
Entwicklung eines Konzeptes zur Nachrüstung von Regenklärbecken mit technischen Regenwasserfiltern
(2023)
The use of wind power is rapidly expanding worldwide. It is important to examine the impact of wind turbines on the environment to see if they provide a net benefit and to identify potential for improving. Therefore life cycle assessments (LCA) of different wind turbine types are compared in this short review. The results are then shown side by side in tables for comparison. Overall the LCAs show that wind turbines compensate the required energy and emitted pollutants after approx. 6-16 months. The energy payback period (EPP) for 2 MW onshore wind turbines remained roughly the same since 2009 with approximately 7 months. Onshore wind turbines have a higher impact due to emissions but a shorter EPP than offshore wind turbines. The estimated service life of 20 years should be maximized to ensure a high energy yield ratio. The biggest impact on the environment results from the processes to provide the building material e.g. steel and cement. That impact could be reduced by 20 % if recycled steel would be used. It is shown that wind power is one of the cleanest energy sources. But further investigations in material processing and recycling are important to improve the eco-balance of wind turbines.
The Spreadsheet Energy System Model Generator (SESMG) is a tool for modeling and optimizing energy systems with a focus on urban systems. The SESMG is easily accessible as it comes with a browser-based graphical user interface, spreadsheets to provide data entry, and detailed documentation on how to use it. Programming skills are not required for the installation or application of the tool. The SESMG includes advanced modeling features such as the application of the multi-energy system (MES) approach, multi-objective optimization, model-based methods for reducing computational requirements, and automated conceptualization and result processing of urban energy systems with high spatial resolution. Due to its accessibility and the applied modeling methods, urban energy systems can be modeled and optimized with comparatively low effort.