Refine
Year
Publication Type
- Article (19)
- Conference Proceeding (17)
- Contribution to a Periodical (2)
- Part of a Book (1)
Language
- English (32)
- German (6)
- Multiple languages (1)
Keywords
- adaptive optics (3)
- deformable mirror (3)
- active optics (2)
- active optics, adaptive optics, sharpness metrics, aberration compensation, algorithm design (2)
- deformable mirrors (2)
- laser machining (2)
- space optics (2)
- space telescopes (2)
- Active or adaptive optics (1)
- Deformable mirror, adaptive mirror, unimorph mirror, high-power laser (1)
Faculty
We recently presented a novel unimorph deformable mirror which allows for dynamic focus shift with an actuation rate of 2 kHz. Such mirrors suffer from hysteresis and creep. Therefore, they have to be operated in closed-loop. For this purpose, we developed a defocus sensor based on an astigmatic detection system. In this paper, we present the sensor design and discuss its performance.
Cross-saturation of the gain media in intra-cavity pumped lasers leads to complex dynamics of the laser power. We present experimental results and a detailed theoretical analysis of this nonlinear dynamics for an intra-cavity pumped Yb:YAG thin-disk laser in the framework of a rate-equation model. The gain medium of this laser is residing in the resonator of a conventional, diode-pumped Yb:YAG thin-disk laser. Continuous-wave operation, periodic pulse trains, and chaotic fluctuations of the optical power of both lasers were observed. The dynamics is not driven by external perturbations but arises naturally in this laser system. Further examination revealed that these modes of operation can be controlled by the resonator length of the diode-pumped laser but that the system can also show hysteresis and multi-stability.
Image-sharpness metrics can be used to optimize optical systems and to control wavefront sensorless adaptive optics systems. We show that for an aberrated system, the numerical value of an image-sharpness metric can be improved by adding specific aberrations. The optimum amplitudes of the additional aberrations depend on the power spectral density of the spatial frequencies of the object.
It has been shown that the beam quality and the efficiency of high-power solid-state lasers could be enhanced by the use of deformable mirrors in order to compensate for optical aberrations. An intracavity compensation requires a deformable mirror which is capable of handling very high laser intensities. The active diameter of the deformable mirror should be a few millimeters in order to match typical fundamental mode laser beam diameters. There is a wide variety of commercially available deformable mirrors, but neither meets all requirements.
With a view to future large space telescopes, we investigate image-based wavefront correction with active optics. We use an image-sharpness metric as merit function to evaluate the image quality, and the Zernike modes as control variables. In severely aberrated systems, the Zernike modes are not orthogonal to each other with respect to this merit function. Using wavefront maps, the PSF, and the MTF, we discuss the physical causes for the non-orthogonality of the Zernike modes with respect to the merit function. We show that for combinations of Zernike modes with the same azimuthal order, a flatter wavefront in the central region of the aperture is more important than the RMS wavefront error across the full aperture for achieving a better merit function. The non-orthogonality of the Zernike modes with respect to the merit function should be taken into account when designing the algorithm for image-based wavefront correction, because it may slow down the process or lead to premature convergence.
On-the-fly remote laser processing plays an increasingly important role in modern fabrication techniques. These processes require guiding of the focus of a laser beam along the contours of the workpiece in three dimensions.
State-of-the-art galvanometer scanners already provide highly dynamic and precise transverse x−y beam steering. However, longitudinal focus shifting (“z-shifting”) relying on conventional optics is restricted to a bandwidth of a few hundred Hz. We have developed and manufactured a fast piezo-based z-shifting mirror with diffraction-limited surface fidelity providing a focus shift of 1z> 60 mm with an actuation rate of 2 kHz.
We summarise the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, and atom interferometers. Prospective applications include metrology, geodesy and measurement of terrestrial mass change due to, e.g., climate change, and fundamental science experiments such as tests of the equivalence principle, searches for dark matter, measurements of gravitational waves and tests of quantum mechanics. We review the current status of cold atom technologies and outline the requirements for their space qualification, including the development paths and the corresponding technical milestones, and identifying possible pathfinder missions to pave the way for missions to exploit the full potential of cold atoms in space. Finally, we present a first draft of a possible road-map for achieving these goals, that we propose for discussion by the interested cold atom, Earth Observation, fundamental physics and other prospective scientific user communities, together with the European Space Agency (ESA) and national space and research funding agencies.