Refine
Year
- 2012 (9) (remove)
Publication Type
- Conference Proceeding (9) (remove)
Has Fulltext
- yes (9) (remove)
Keywords
- Gebühr (1)
- Recycling (1)
- Stoffstrom (1)
- Wertstoff (1)
Sedimentumleitstollen leiten die sedimentreichen Hochwasserspitzen um die Tal-sperre herum in den Unterlauf des Flusses und verhindern so eine fortschreitende Verlandung des Stauraums. Aufgrund der hohen Fließgeschwindigkeiten und gro-ßen Sedimentfrachten in Umleitstollen weisen diese starke Verschleißerscheinun-gen auf, die zu hohen Unterhaltskosten führen. Es gibt verschiedene Konzepte um diesem Problem entgegen zu wirken. Einerseits kann der Umleitstollen hydrau-lisch optimiert werden, um die Belastung auf die Sohle zu minimieren. Auf der anderen Seite kann der Widerstand der Stollensohle verbessert werden. An der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie (VAW) der ETH Zü-rich werden zur Zeit zwei Forschungsarbeiten durchgeführt, die sich diesen zwei Aspekten widmen. In großskaligen Laborversuchen erfolgt eine systematische Untersuchung und Optimierung der maßgebenden Parameter wie Fortbewegungs-art des Sediments und Abrasionstiefe der Stollensohle. Anhand von Prototypver-suchen im neu errichteten Sedimentumleitstollen Solis in Graubünden (Schweiz) werden die Zusammenhänge zwischen Beanspruchung, Materialeigenschaften und Abrasion im Prototyp ermittelt. Darauf basierend können Empfehlungen be-züglich Materialwahl, konstruktiver Durchbildung und Dimensionierung abgege-ben und so zu einer nachhaltigen und wirtschaftlichen Wasserbewirtschaftung in Stauseen beigetragen werden.
Reservoir sedimentation is an increasing problem affecting the majority of reservoirs both in Switzerland and worldwide. As many dams are more than 50 years of age, this problem is becoming more and more serious nowadays. Res-ervoir sedimentation leads to various severe problems such as a decisive de-crease of the active reservoir volume leading to both loss of energy production and water available for water supply and irrigation. These problems will intensify in the near future, because sediment supply tends to increase due to climate change. Therefore, countermeasures have to be developed. They can be divided into the three main categories sediment yield reduction, sediment routing and sediment removal. This paper focuses on the sediment routing using sediment bypass tunnels. Sediment bypass tunnels are an effective means to decrease the reservoir sedimentation process. By routing the sediments around the reservoir into the tailwater, sediment accumulation is reduced significantly. However, the number of sediment bypass tunnels in the world is limited primarily due to high investment and maintenance costs. The main problem of all bypass tunnels is the invert abrasion due to high velocities in combination with high sediment transport. Three Swiss bypass tunnel examples suffering invert abrasion are presented in this paper. Furthermore, VAW started a research project to investigate the invert abrasion process by conducting hydraulic scale tests in the laboratory. The goal of this research project is to establish general design criteria for optimal flow con-ditions where both sediment depositions in the tunnel are avoided and the result-ing abrasion damages are kept at a minimum.
Mittlerweile eine feste Institution und im Terminkalender vieler FM und CREM Verantwortlichen fixiert: Der Münsteraner Facility Management Tag. Seit nunmehr 10 Jahren kommen Interessierte und Freunde der FM-Branche nach Münster, um gemeinsam über Entwicklungen und Trends der Branche zu diskutieren. Der Münsteraner Facility Management Tag verfolgt dabei folgende Schwerpunkte: Darstellung praxisnaher Lösungsansätze Praxisorientierte Wissensvermittlung Stärkung des Transfers zwischen Theorie und Praxis unter dem Motto "Wissenschaft.Praktisch.Machen" Erfahrungsaustausch und best-practice
Durch das Kreislaufwirtschaftsgesetz werden die Weichen für die Zukunft neu gestellt. Ein weiterer Baustein wird das noch ausstehende Wertstoffgesetz mit Ausführungen zur Wertstofftonne sein. Insbesondere der Trägerschaft und der Frage der Produktverantwortung sowie der zusätzlich zu erfassenden Wertstoffe sind noch viele Fragen offen. Derzeit werden unterschiedliche Varianten diskutiert und teilweise in Modellversuchen getestet.
Insbesondere durch erhöhte Wertstofftrennung, aber auch durch demografische und andere abfallwirtschaftliche Entwicklungen wird das über die grauen Restabfallbehälter entsorgte Volumen immer weniger. In nahezu allen Gebieten Deutschland werden jedoch die misten Kosten über den Verteilungsschlüssel Restabfallbehälter auf die Gebührenschuldner umgelegt. Bei Verteilung der weitgehend gleichen Kosten auf einen immer geringere werdenden Maßstab bedeutet diese eine kontinuierliche Erhöhung der Gebührensätze und kann somit nicht zielführend sein.
Die aktuelle Standardisierung und Normung von Dienstleistungen in der Abfall- und Wertstoffsammlung unter Angebe konkreter Service Levels verdeutlicht die Notwendigkeit von Qualitätsprüfungen als Bestandteil des Qualitätsmanagements in diesem Bereich. Die aktuelle Untersuchung hat das Ziel, praxisrelevante Qualitätsmerkmale abzuleiten, in der Praxis messbare Indikatoren zu identifizieren und eine Methodik zur Durchführung der Qualitätsprüfungen zu entwickeln.
We have developed a new type of unimorph deformable mirror, designed to correct for low-order Zernike modes. The mirror has a clear optical aperture of 50 mm combined with large peak-to-valley Zernike amplitudes of up to 35 μm. Newly developed fabrication processes allow the use of prefabricated super-polished and coated glass substrates. The mirror's unique features suggest the use in several stronomical applications like the precompensation of atmospheric aberrations seen by laser beacons and the use in woofer-tweeter systems. Additionally, the design enables an efficient correction of the inevitable wavefront error imposed by the floppy structure of primary mirrors in future large space-based telescopes. We have modeled the mirror by using analytical as well as finite element models. We will present design, key features and manufacturing steps of the deformable mirror.
Characterization of a miniaturized unimorph deformable mirror for high power cw-solid state lasers
(2012)
We have developed a new type of unimorph deformable mirror for real-time intra-cavity phase control of high power cw-lasers. The approach is innovative in its combination of super-polished and pre-coated highly reflective substrates, the miniaturization of the unimorph principle, and the integration of a monolithic tip/tilt functionality. Despite the small optical aperture of only 9 mm diameter, the mirror is able to produce a stroke of several microns for low order Zernike modes, paired with a residual static root-mean-square aberration of less than 0.04 µm. In this paper, the characteristics of the mirror such as the influence functions, the dynamic behavior, and the power handling capability are reported. The mirror was subjected to a maximum of 490 W of laser-light at a wavelength of 1030 nm. Due to the high reflectivity of over 99.998 percent the mirror is able to withstand intensities up to 1.5 MW/cm2.
We have developed a new type of unimorph deformable mirror for the correction of low-order Zernike modes. The mirror features a clear aperture of 50 mm combined with large peak-to-valley amplitudes of up to 35 μm. Newly developed fabrication processes allow the use of prefabricated, coated, super-polished glass substrates. The mirror's unique features suggest the use in several astronomical applications like the compensation of atmospheric aberrations seen by laser beacons, low light astronomy, and the use in woofer-tweeter systems. Additionally, the design enables an efficient correction of the inevitable wave-front error imposed by the floppy structure of primary mirrors in future large space telescopes. We have modeled the mirror by using analytical as well as finite element models. We will present design, key features and manufacturing steps of the deformable mirror.