Refine
Year
- 2020 (32) (remove)
Publication Type
- Article (26)
- Conference Proceeding (4)
- Book (1)
- Part of a Book (1)
Keywords
- deformable mirrors (2)
- laser machining (2)
- Laser shock peeningFemtosecond laserNiTi alloyCorrosion behaviorLaser surface treatment (1)
- beam steering (1)
- diode lasers (1)
- laser beams (1)
- laser materials processing (1)
- laser mode locking; polymerisation; optical waveguides; high-speed optical techniques; two-photon processes; optical pulse compression; optical saturable absorption; integrated optics; semiconductor lasers (1)
- laser shock peeningfemtosecond laserNiTi alloymicrohardness (1)
- optical components (1)
Faculty
- Physikingenieurwesen (PHY) (32) (remove)
Laser shock peening with a femtosecond laser system was presented in this research work. The NiTi shape memory alloy was processed by the femtosecond laser shock peening (FsLSP) treatment without a protective layer in the air. Femtosecond laser shock peening is a new surface technology, which can induce an intense shock wave with low single laser pulse energy under atmospheric conditions. The surface topography, roughness, microhardness, and wear resistance were measured on the surface of NiTi alloy before and after femtosecond laser peening treatment. The results showed that the surface roughness and microhardness could be increased after femtosecond laser shock peening, which may be due to the laser ablation and micro-plastic deformation induced by the shock wave. The wear property of NiTi alloy was improved, which may be attributed to the FsLSPed surface texturing and …
We recently presented a novel unimorph deformable mirror which allows for dynamic focus shift with an actuation rate of 2 kHz. Such mirrors suffer from hysteresis and creep. Therefore, they have to be operated in closed-loop. For this purpose, we developed a defocus sensor based on an astigmatic detection system. In this paper, we present the sensor design and discuss its performance.
Three-dimensional porous nanostructures made of noble metals represent novel class of nanomaterials promising for nonlinear nanooptics and sensors. Such nanostructures are typically fabricated using either reproducible yet time-consuming and costly multi-step lithography protocols or less reproducible chemical synthesis that involve liquid processing with toxic compounds. Here, we combined scalable nanosecond-laser ablation with advanced engineering of the chemical composition of thin substrate-supported Au films to produce nanobumps containing multiple nanopores inside. Most of the nanopores hidden beneath the nanobump surface can be further uncapped using gentle etching of the nanobumps by an Ar-ion beam to form functional 3D plasmonic nanosponges. The nanopores 10–150 nm in diameter were found to appear via laser-induced explosive evaporation/boiling and coalescence of the randomly arranged nucleation sites formed by nitrogen-rich areas of the Au films. Density of the nanopores can be controlled by the amount of the nitrogen in the Au films regulated in the process of their magnetron sputtering assisted with nitrogen-containing discharge gas.
Studies on ultra-short pulsed laser shock peening of stainless-steel in different confinement media
(2020)
We investigate the role of liquid confinement media on ultra-short pulsed Laser Shock Peening (LSP). The LSP of stainless-steel 316 and 316 L was studied using Ti: Sapphire laser pulses of about 2 ps duration, maximum energy of about 1 mJ and pulse repetition rate of 5 kHz in different liquid confinement media of Ethanol, Deionized water and separate aqueous solutions of NaCl and Glycerol. It is found that the laser fluence and/or energy attenuating mechanisms like self-focusing, filamentation, plasma breakdown in the confinement media are less significant with ps laser pulses than those with sub-ps or fs pulse durations. It is shown that the resulting surface hardness of the peened steel as a function of laser fluence depends significantly on the confinement media and the relative increase in the hardness increases monotonically with the acoustic impedance of the liquid of the confinement medium used during …
This paper describes how two-photon polymerization was used to generate biomimetic nanostructures with angle-insensitive coloration inspired by the blue butterflies of Morpho. Less angle dependence was achieved by engineering the structures with a certain degree of disorder, which delimited them from classical photonic crystals. Variations in the processing parameters enabled the color hue to be controlled. In this context, blue, green, yellow, and brown structures were demonstrated. Reflection spectra of the structures were simulated and studied experimentally in a broad range of incident angles. Additionally, a molding technique was performed as a potential scale-up strategy. The application of such biomimetic structures is discussed.
Two different scenarios are usually invoked in the formation of femtosecond Laser-Induced Periodic Surface Structures (LIPSS), either “self-organization” mechanisms or a purely “plasmonic” approach. In this paper, a three-step model of formation of single-laser-shot LIPSS is summarized. It is based on the periodic perturbation of the electronic temperature followed by an amplification, for given spatial periods, of the modulation in the lattice temperature and a final possible relocation by hydrodynamic instabilities. An analytical theory of the evolution of the temperature inhomogeneities is reported and supported by numerical calculations on the examples of three different metals: Al, Au, and Mo. The criteria of the possibility of hydrodynamic instabilities are also discussed.
High strength steel has been used in the aviation industry and automotive body structural applications to reduce its mass through a reduction in thickness. Therefore, it is very important to enhance its mechanical property, such as microhardness. In the present research, the high strength steel samples were treated by laser shock peening (LSP) with different laser pulse energy and laser pulse width. The microhardness and residual stress were measured to compare the difference between laser energy of 3 J with 10 ns and 5 J with 20 ns. The results in the study show that the surface LSP treatment can increase the microhardness and the compressive residual stress can be found when the samples were tested by hole drilling testing.
In this Letter, the authors present the construction of three-dimensional microstructures by two-photon polymerisation induced by ultrashort pulses of a mode-locked diode laser. The ultrafast light source is based on a diode laser with segmented metallisation to realise a waveguide integrated saturable absorber. It is subsequently amplified and compressed resulting in ultrashort laser pulses of 440 fs length and average output power of 160 mW at a fundamental repetition rate of 383.1 MHz. These pulses are coupled into a customised two-photon polymerisation setup. A series of suspended lines were fabricated between support cuboids for testing the process behaviour. A 3D structure with complex features was polymerised to demonstrate the high potential for mode-locked diode lasers in the field of direct laser writing.