Bredol, Michael
Refine
Year of publication
Document Type
- Article (37)
- Lecture (28)
- Part of a Book (4)
- Article in Conference Proceedings (2)
Language
- English (68)
- Multiple languages (2)
- German (1)
Is part of the Bibliography
- no (71)
Keywords
Institute
Synthetic and natural carbons are widely used as carrier for electrodes in electrochemical applications. They need to have a controlled morphology in order to facilitate mass and charge transport, so the process of film formation is of uttermost importance. Here we show, how carbons (after proper preconditioning) can be codeposited with an ionomer by electrophoretic deposition, a method that does allow full control of
deposition conditions during the process. In view of potential applications, we focus on the direct deposition on proton conducting
membranes. Ionomers and membranes applied are based on established per-fluorinated polyethylene with SO3H terminated side chains (PFSA). Conditions for reproducible deposition are reported in terms of optimal charge on the carbon particles, field strength in the deposition cell and
necessary deposition times for a given film thickness. Additionally, a horizontal cell arrangement is suggested to avoid gravitational effects.
This study investigated the ability of electrically conductive carbon rovings to detect cracks in textile-reinforced concrete (TRC) structures. The key innovation lies in the integration of carbon rovings into the reinforcing textile, which not only contributes to the mechanical properties of the concrete structure but also eliminates the need for an additional sensory system, such as strain gauges, to monitor the structural health. Carbon rovings are integrated into a grid-like textile reinforcement that differs in binding type and dispersion concentration of the styrene butadiene rubber (SBR) coating. Ninety final samples were subjected to a four-point bending test in which the electrical changes of the carbon rovings were measured simultaneously to capture the strain. The mechanical results show that the SBR50-coated TRC samples with circular and elliptical cross-sectional shape achieved, with 1.55 kN, the highest bending tensile strength, which is also captured with a value of 0.65 Ω by the electrical impedance monitoring. The elongation and fracture of the rovings have a significant effect on the impedance mainly due to electrical resistance change. A correlation was found between the impedance change, binding type and coating. This suggests that the elongation and fracture mechanisms are affected by the number of outer and inner filaments, as well as the coating.
Semiconductors
(2022)
Different from negatively charged CuInS2 (CIS) based quantum dots (QDs), positively charged QDs are difficult to obtain in good optical quality, but are desirable for certain applications. We herein present a general synthesis strategy that allows for a universal surface modification of ternary CIS based QDs with thiol containing ligands.
The idea behind the synthesis design is, to apply a ZnS shell first for passivating and protecting the core QDs, and then add a second ZnS shell for the functionalization via ligand exchange. Whereby easy ligand exchange with thiolated molecules is systematically set up, by using a weak bonding amine ligand for the second shell. Molecules with various terminal groups were used to functionalize the nanoparticles and stabilize them in different media making any surface charge and polarity accessible. Surface defect chemistry seemed to play an important role in our synthesis strategy, therefore to gain a deeper understanding how these defect sites can alter the electronic structure of core/shell nanoparticles theoretical calculations based on density functional theory were performed, whilst structural, colloidal and optical properties were characterized experimentally (by dynamic light scattering, x-ray diffraction, infrared spectroscopy, zeta potential, absorption- and (time resolved) photoluminescence
measurements).