Refine
Publication Type
- Article (2)
- Conference Proceeding (1)
Has Fulltext
- yes (3) (remove)
Keywords
Faculty
- Maschinenbau (MB) (3) (remove)
This study presents a comprehensive evaluation of force sensors manufactured through conventional CNC machining, laser powder bed fusion (LPBF), and material extrusion (MEX) 3D printing methods. The study utilized a combination of finite element method (FEM) simulations, functional testing, durability assessments, and ultimate strength testing in order to assess the viability of additive manufacturing for sensing technology applications. The FEM simulations provided a preliminary framework for predictive analysis, closely aligning with experimental outcomes for LPBF and conventionally manufactured sensors. Nevertheless, discrepancies were observed in the performance of MEX-printed sensors during ultimate strength testing, necessitating the implementation of more comprehensive modeling approaches that take into account the distinctive material characteristics and failure mechanisms. Functional testing confirmed the operational capability of all sensors, thereby demonstrating their suitability for the intended application. Moreover, all sensors exhibited resilience during 50,000 cycles of cyclic testing, indicating reliability, durability, and satisfactory fatigue life performance. Notably, sensors produced via LPBF exhibited a significant increase in strength, nearly three times that of conventionally manufactured sensors. These findings suggest the potential for innovative sensor design and the expansion of their use into higher-loaded applications. Overall, while both LPBF and conventional methods demonstrated reliability and closely matched simulation predictions, further research is necessary to refine modeling approaches for MEX-printed sensors and fully unlock their potential in sensing technology applications. These findings indicate that additive manufacturing of metals may be a viable alternative for the fabrication of biomedical sensors.
Experimental results are presented of a test of the theory of local turbulent heat transfer measurements proposed by Mocikat and Herwig in 2007. A miniaturized multi-layer heat transfer sensor was developed and employed in this study. The new heat transfer sensor was designed to work in air and liquids, and this capability enabled the simultaneous investigation of different Prandtl numbers. Two basic configurations, namely the flow past a blunt plate and the flow past an inclined square cylinder, were investigated in test sections of wind and water tunnels. Convective heat transfer coefficients were obtained through conventional testing (i.e., employing thoroughly heated test objects) and using the new miniaturized sensor approach (i.e., utilizing cold test objects without heating). The main prediction of the Mocikat-Herwig theory that a specific thermal adjustment coefficient of the employed actual miniaturized heat transfer sensor should exist in the fully turbulent flow regime was proven for developed two-dimensional flow. The observed effect of the Prandtl number on this coefficient was in good agreement with the prediction of the asymptotic expansion method. The square cylinder results indicated the inherent limits of the local turbulent heat transfer measurement approach, as suggested by Mocikat and Herwig.