TY - JOUR ED - Wittrock, Ulrich ED - Kynast, Ulrich ED - Jüstel, Thomas ED - Bredol, Michael T1 - 6th Laser Ceramics Symposium T2 - Opt. Mat. Y1 - 2012 UR - https://www.sciencedirect.com/journal/optical-materials/vol/34/issue/6 VL - 34 SP - 935 EP - 1002 PB - Elsevier B.V. ER - TY - CHAP A1 - Sauvage, Marc A1 - Amiaux, Jérome A1 - Austin, James A1 - Bello, Mara A1 - Bianucci, Giovanni A1 - Chesné, Simon A1 - Citterio, Oberto A1 - Collette, Christophe A1 - Correia, Sébastien A1 - Durand, Gilles A. A1 - Molinari, Sergio A1 - Pareschi, Giovanni A1 - Penfornis, Yann A1 - Sironi, Giorgia A1 - Valsecchi, Guiseppe A1 - Verpoort, Sven A1 - Wittrock, Ulrich T1 - A development roadmap for critical technologies needed for TALC: a deployable 20m annular space telescope T2 - Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, Proc. SPIE N2 - Astronomy is driven by the quest for higher sensitivity and improved angular resolution in order to detect fainter or smaller objects. The far-infrared to submillimeter domain is a unique probe of the cold and obscured Universe, harboring for instance the precious signatures of key elements such as water. Space observations are mandatory given the blocking effect of our atmosphere. However the methods we have relied on so far to develop increasingly larger telescopes are now reaching a hard limit, with the JWST illustrating this in more than one way (e.g. it will be launched by one of the most powerful rocket, it requires the largest existing facility on Earth to be qualified). With the Thinned Aperture Light Collector (TALC) project, a concept of a deployable 20 m annular telescope, we propose to break out of this deadlock by developing novel technologies for space telescopes, which are disruptive in three aspects: • An innovative deployable mirror whose topology, based on stacking rather than folding, leads to an optimum ratio of collecting area over volume, and creates a telescope with an eight times larger collecting area and three times higher angular resolution compared to JWST from the same pre-deployed volume; • An ultra-light weight segmented primary mirror, based on electrodeposited Nickel, Composite and Honeycomb stacks, built with a replica process to control costs and mitigate the industrial risks; • An active optics control layer based on piezo-electric layers incorporated into the mirror rear shell allowing control of the shape by internal stress rather than by reaction on a structure. We present in this paper the roadmap we have built to bring these three disruptive technologies to technology readiness level 3. We will achieve this goal through design and realization of representative elements: segments of mirrors for optical quality verification, active optics implemented on representative mirror stacks to characterize the shape correction capabilities, and mechanical models for validation of the deployment concept. Accompanying these developments, a strong system activity will ensure that the ultimate goal of having an integrated system can be met, especially in terms of (a) scalability toward a larger structure, and (b) verification philosophy. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-9248 VL - 9904 SP - 99041L ER - TY - JOUR A1 - Kazasidis, Orestis A1 - Verpoort, Sven A1 - Wittrock, Ulrich T1 - Aberration balancing using an image-sharpness metric JF - J. Opt. Soc. Am. A N2 - Image-sharpness metrics can be used to optimize optical systems and to control wavefront sensorless adaptive optics systems. We show that for an aberrated system, the numerical value of an image-sharpness metric can be improved by adding specific aberrations. The optimum amplitudes of the additional aberrations depend on the power spectral density of the spatial frequencies of the object. KW - adaptive optics; image-sharpness Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-109198 UR - https://www.osapublishing.org/josaa/abstract.cfm?uri=josaa-36-8-1418 VL - 36 IS - 8 SP - 1418 EP - 1422 ER - TY - JOUR A1 - Verpoort, Sven A1 - Wittrock, Ulrich T1 - Actuator patterns for unimorph and bimorph deformable mirrors JF - Appl. Opt. N2 - The actuator pattern of an adaptive mirror determines the amplitudes and the fidelities of the mirror deformations that can be achieved. In this study, we analyze and compare different electrode patterns of piezoelectric unimorph deformable mirrors using a numerical finite element model. The analysis allows us to determine the optimum actuator pattern, and it is also applicable to bimorph mirrors. The model is verified by comparing its predictions with experimental results of our prototype of a novel unimorph deformable mirror. Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-6490 UR - http://www.opticsinfobase.org VL - 49 SP - G37 EP - G46 PB - OSA ER - TY - CHAP A1 - Wittrock, Ulrich A1 - Welp, Petra T1 - Adaptive laser resonator control with deformable MOEMS mirrors T2 - MEMS/MOEMS Components and Their Applications III, Proc. SPIE N2 - Adaptive laser resonators with deformable MOEMS mirrors under closed-loop control are discussed and experimental results are presented. The requirements for deformable mirrors and for closed-loop control systems of these mirrors are analyzed. Several deformable mirrors have been characterized and the results are presented. Currently available membrane mirrors deform under laser load and need further development before they can be used for aberration correction of solid state lasers above some tens of Watts. Nevertheless, the results are encouraging and the requirements are within reach of currently available technology. Finally, we demonstrate an Nd.YVO4-laser with a closed-loop adaptive resonator and more than 6 W of output power. The closed-loop system was able to compensate artificially introduced aberrations from a phase plate. Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-6537 VL - 6113 SP - 61130C PB - SPIE ER - TY - CHAP A1 - Heuck, Hans-Martin A1 - Wittrock, Ulrich A1 - Fils, Jérome A1 - Borneis, Stefan A1 - Witte, Klaus A1 - Eisenbart, Udo A1 - Javorkova, Dasa A1 - Bagnoud, Vincent A1 - Götte, Stefan A1 - Tauschwitz, Andreas A1 - Onkels, Eckehard T1 - Adaptive optics at the PHELIX laser T2 - Adaptive Optics for Laser Systems and Other Applications, Proc. SPIE N2 - GSI Darmstadt currently builds a high-energy petawatt Nd:glass laser system, called PHELIX (Petawatt High-Energy Laser for Heavy-Ion Experiments). PHELIX will offer the world-wide unique combination of a high current, high-energy heavy-ion beam with an intense laser beam. Aberrations due to the beam transport and due to the amplification process limit the focusability and the intensity at the target. We have investigated the aberrations of the different amplification stages. The pre-amplifier stage consists of three rod-amplifiers which cause mainly defocus, but also a small part of coma and astigmatism. The main amplifier consists of five disk amplifiers with a clear aperture of 315 mm. These large disk-amplifiers cause pump-shot aberrations which occur instantly. After a shot, the disk amplifiers need a cooling time of several hours to relax to their initial state. This limits the repetition rate and causes long-term aberrations. We will present first measurements of the pump-shot and long-term aberrations caused by the pre- and the main amplifier in a single-pass configuration. In this context, we will present the adaptive optics system which is implemented in the PHELIX beam line and discuss its capability to compensate for the pump-shot and long-term aberrations. Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-6215 VL - 6584 SP - 658402 PB - SPIE ER - TY - BOOK ED - Wittrock, Ulrich T1 - Adaptive optics for industry and medicine. Proceedings of the 4th International Workshop on Adaptive Optics for Industry and Medicine Y1 - 2005 UR - https://www.springer.com/de/book/9783540239789 SN - 3-540-23978-2 PB - Springer CY - Berlin ER - TY - CHAP A1 - Kazasidis, Orestis A1 - Verpoort, Sven A1 - Wittrock, Ulrich T1 - Algorithm design for image-based wavefront control without wavefront sensing T2 - SPIE Optical Instrument Science, Technology, and Applications, Proc. SPIE N2 - Active optics is an enabling technology for future large space telescopes. Image-based wavefront control uses an image-sharpness metric to evaluate the optical performance. A control algorithm iteratively adapts a corrective element to maximize this metric, without reconstructing the wavefront. We numerically study a sharpness metric in the space of Zernike modes, and reveal that for large aberrations the Zernike modes are not orthogonal with respect to this metric. The findings are experimentally verified by using a unimorph deformable mirror as corrective element. We discuss the implications for the correction process and the design of control algorithms. KW - active optics, adaptive optics, sharpness metrics, aberration compensation, algorithm design Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-14760 UR - https://www.spiedigitallibrary.org/conference-proceedings-of-spie/10695/1069502/Algorithm-design-for-image-based-wavefront-control-without-wavefront-sensing/10.1117/12.2312523.full VL - 10695 SP - 1069502 ER - TY - CHAP A1 - Rausch, Peter A1 - Verpoort, Sven A1 - Wittrock, Ulrich T1 - Characterization of a miniaturized unimorph deformable mirror for high power cw-solid state lasers T2 - Proc. SPIE 8253, MEMS Adaptive Optics VI, 825309 N2 - We have developed a new type of unimorph deformable mirror for real-time intra-cavity phase control of high power cw-lasers. The approach is innovative in its combination of super-polished and pre-coated highly reflective substrates, the miniaturization of the unimorph principle, and the integration of a monolithic tip/tilt functionality. Despite the small optical aperture of only 9 mm diameter, the mirror is able to produce a stroke of several microns for low order Zernike modes, paired with a residual static root-mean-square aberration of less than 0.04 µm. In this paper, the characteristics of the mirror such as the influence functions, the dynamic behavior, and the power handling capability are reported. The mirror was subjected to a maximum of 490 W of laser-light at a wavelength of 1030 nm. Due to the high reflectivity of over 99.998 percent the mirror is able to withstand intensities up to 1.5 MW/cm2. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-6226 PB - SPIE ER - TY - JOUR A1 - Heuck, Hans-Martin A1 - Neumayer, Paul A1 - Kühl, Thomas A1 - Wittrock, Ulrich T1 - Chromatic aberration in petawatt-class lasers JF - Appl. Phys. B N2 - In order to avoid optical damage and non-linear effects, high-power, high-energy lasers of the petawatt class like PHELIX (petawatt high-energy laser for heavy-ion experiments) use large-aperture optics. Usually, chromatic aberration associated with these optical elements is neglected. By means of numerical simulations, we show how the chromatic aberration affects the focal intensity pattern. In particular, we make quantitative predictions of how chromatic aberration decreases the focused peak intensity. Furthermore, we prove the feasibility of a new interferometer that measures the temporal pulse front distortions which arise from expansion telescopes. We also propose a scheme that pre-compensates these distortions. Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-6523 VL - 84 SP - 421 EP - 428 PB - Springer ER - TY - CHAP A1 - Verpoort, Sven A1 - Wittrock, Ulrich T1 - Deformable mirrors for high power lasers T2 - Proceedings of the 8th International Workshop on Adaptive Optics for Industry and Medicine (AOIM) N2 - It has been shown that the beam quality and the efficiency of high-power solid-state lasers could be enhanced by the use of deformable mirrors in order to compensate for optical aberrations. An intracavity compensation requires a deformable mirror which is capable of handling very high laser intensities. The active diameter of the deformable mirror should be a few millimeters in order to match typical fundamental mode laser beam diameters. There is a wide variety of commercially available deformable mirrors, but neither meets all requirements. KW - Deformable mirror, adaptive mirror, unimorph mirror, high-power laser Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-106953 UR - http://congresos.um.es/aoim/aoim2011/schedConf/presentations ER - TY - JOUR A1 - Buske, Ivo A1 - Wittrock, Ulrich T1 - Diffraction analysis of aberrated laser resonators JF - Appl. Phys. B N2 - A numerical analysis of laser resonators with aberrations is presented. {T}he analysis shows that aberrations lead to large diffraction losses of laser resonators which are laid out to produce diffraction-limited beam quality. {S}tatic or dynamic compensation of the aberrations is possible and would yield much higher output power. Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-8252 VL - 83 SP - 229 EP - 233 ER - TY - JOUR A1 - Kazasidis, Orestis A1 - Verpoort, Sven A1 - Soloviev, Oleg A1 - Vdovin, Gleb A1 - Verhaegen, Michel A1 - Wittrock, Ulrich T1 - Extended-image-based correction of aberrations using a deformable mirror with hysteresis JF - Opt. Expr. N2 - With a view to the next generation of large space telescopes, we investigate guide-star-free, image-based aberration correction using a unimorph deformable mirror in a plane conjugate to the primary mirror. We designed and built a high-resolution imaging testbed to evaluate control algorithms. In this paper we use an algorithm based on the heuristic hill climbing technique and compare the correction in three different domains, namely the voltage domain, the domain of the Zernike modes, and the domain of the singular modes of the deformable mirror. Through our systematic experimental study, we found that successive control in two domains effectively counteracts uncompensated hysteresis of the deformable mirror. KW - active optics, metrics, aberration compensation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-14759 UR - https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-26-21-27161&id=398820 VL - 26 SP - 27161 EP - 27178 ER - TY - JOUR A1 - Verpoort, Sven A1 - Bittner, Matthias A1 - Wittrock, Ulrich T1 - Fast focus-shifter based on a unimorph deformable mirror JF - Applied Optics N2 - On-the-fly remote laser processing plays an increasingly important role in modern fabrication techniques. These processes require guiding of the focus of a laser beam along the contours of the workpiece in three dimensions. State-of-the-art galvanometer scanners already provide highly dynamic and precise transverse x−y beam steering. However, longitudinal focus shifting (“z-shifting”) relying on conventional optics is restricted to a bandwidth of a few hundred Hz. We have developed and manufactured a fast piezo-based z-shifting mirror with diffraction-limited surface fidelity providing a focus shift of 1z> 60 mm with an actuation rate of 2 kHz. KW - beam steering KW - deformable mirrors KW - optical components KW - laser machining KW - laser materials processing Y1 - 2020 UR - https://www.osapublishing.org/ao/abstract.cfm?uri=ao-59-23-6959 U6 - http://dx.doi.org/10.1364/AO.397495 SN - 1559-128X VL - 59 IS - 23 SP - 6959 EP - 6965 ER - TY - JOUR A1 - Wittrock, Ulrich T1 - Grenzen? Welche Grenzen? Prof. Ulrich Wittrock, Leiter des Labors für Photonik an der Fachhochschule Münster, fragt nach den ultimativen Grenzen der Lasertechnik JF - Laser Community - das Lasermagazin von Trumpf Y1 - 2014 VL - 02:14 ER - TY - CHAP A1 - Kazasidis, Orestis A1 - Verpoort, Sven A1 - Wittrock, Ulrich T1 - Image-based wavefront correction for space telescopes T2 - International Conference on Space Optics - ICSO 2018 N2 - With a view to future large space telescopes, we investigate image-based wavefront correction with active optics. We use an image-sharpness metric as merit function to evaluate the image quality, and the Zernike modes as control variables. In severely aberrated systems, the Zernike modes are not orthogonal to each other with respect to this merit function. Using wavefront maps, the PSF, and the MTF, we discuss the physical causes for the non-orthogonality of the Zernike modes with respect to the merit function. We show that for combinations of Zernike modes with the same azimuthal order, a flatter wavefront in the central region of the aperture is more important than the RMS wavefront error across the full aperture for achieving a better merit function. The non-orthogonality of the Zernike modes with respect to the merit function should be taken into account when designing the algorithm for image-based wavefront correction, because it may slow down the process or lead to premature convergence. KW - active optics, adaptive optics, sharpness metrics, aberration compensation, algorithm design Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-109036 UR - https://www.spiedigitallibrary.org/conference-proceedings-of-spie/11180/111807Z/Image-based-wavefront-correction-for-space-telescopes/10.1117/12.2536206.full?SSO=1 SP - 111807Z PB - Proc. SPIE ER - TY - JOUR A1 - Kazasidis, Orestis A1 - Wittrock, Ulrich T1 - Interferometric measurement of the temperature coefficient of the refractive index dn/dT and the coefficient of thermal expansion of Pr:YLF laser crystals JF - Opt. Expr. N2 - We report interferometric measurements of the temperature coefficient of the refractive index (dn=dT) and the coefficient of thermal expansion (a) of a praseodymium-doped yttrium lithium fluoride (Pr:YLF) crystal and of a fused silica reference sample. Our phase-resolved interferometric method yields a large number of data points and thus allows a precise measurement and a good error estimation. Furthermore, both dn=dT and a are obtained simultaneously from a single measurement which reduces errors that can occur in separate measurements. Over the temperature range from 20 °C to 80 °C, the value of dn=dT of Pr:YLF decreases from -5.2 x 10-6 /K to -6.2 x 10-6 /K for the ordinary refractive index and from -7.6 x 10-6 /K to -8.6 x 10-6 /K for the extraordinary refractive index. The coefficient of thermal expansion for the a-axis of Pr:YLF increases from 16.4 x 10-6 /K to 17.8 x 10-6 /K over the same temperature range. KW - refractive index change KW - thermal expansion coefficient KW - laser crystal KW - praseodymium KW - yttrium lithium fluoride Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-7720 VL - 22 SP - 30683 EP - 30696 PB - Optical Society of America ER - TY - JOUR A1 - Vorholt, Christian A1 - Wittrock, Ulrich T1 - Intra-cavity pumped Yb:YAG thin-disk laser with 1.74% quantum defect JF - Opt. Lett. N2 - We present, to the best of our knowledge, the first intracavity pumped Yb:YAG thin-disk laser. It operates at 1050.7 nm with a quantum defect of just 1.74% due to pumping at 1032.4 nm. Low absorption of the pump light at the pump wavelength of 1032.4 nm is compensated for by placing the disk inside the resonator of another Yb:YAG thin-disk laser which is diode-pumped at 940 nm. The intra-cavity pumped laser has an output power of 10.3 W and a slope efficiency of 8.3% Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-8284 VL - 40 SP - 4819 EP - 4822 ER - TY - JOUR A1 - Wittrock, Ulrich T1 - Laryngeally echolocating bats (Brief Communication Arising) JF - Nature Y1 - 2010 U6 - http://dx.doi.org/10.1038/nature09156 VL - 466 SP - E6 ER - TY - JOUR A1 - Wittrock, Ulrich T1 - Limitations? What Limitations? Prof. Ulrich Wittrock, head of the Photonics Laboratory at the Münster University of Applied Sciences, seeks out the ultimate boundaries of laser technology JF - Laser Community - the laser magazine from Trumpf Y1 - 2014 VL - 02:14 ER -