TY - CHAP A1 - Weber, Lukas A1 - Annas, Sven A1 - Messing, Georg A1 - Elfering, Michael A1 - Jantzen, Hans-Arno A1 - Scholz, Jürgen T1 - Entwicklung von Messverfahren zur Geschwindigkeitsmessung in Biogasanlagen T2 - Biogas in der Landwirtschaft / KTBL (Hg.) Y1 - 2021 SN - 978-3-945088-83-8 SP - 206 EP - 208 ER - TY - CHAP A1 - Wagner, Robert A1 - Dönnebrink, Kai A1 - Reinker, Felix A1 - Hasselmann, Karsten A1 - Rejek, Jonas A1 - aus der Wiesche, Stefan T1 - A Modular Low-Speed Wind Tunnel with Two Test Sections and Variable Inflow Angle T2 - Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exhibition Y1 - 2015 CY - Houston, Texas, USA ER - TY - GEN A1 - Uhkötter, Stephan A1 - Kursch, Michael A1 - aus der Wiesche, Stefan T1 - Entwicklung und Validierung eines dreidimensionalen turbulenten mehrphasigen CFD-Analysewerkzeugs für Strömungen in Turbinengleitlagern, Jahrestreffen der Fachgruppe Wärme- und Stoffübertragung, Weimar Y1 - 2012 ER - TY - GEN A1 - Uhkötter, Stephan A1 - Joos, Franz A1 - aus der Wiesche, Stefan T1 - Experimentelle und theoretische Untersuchung zum Vermischungsverhalten in hochtourigen Turbinengleitlagertaschen Y1 - 2013 ER - TY - GEN A1 - Uhkötter, Stephan A1 - Helcig, Christian A1 - aus der Wiesche, Stefan T1 - Konvektionstrocknung unter Ausnutzung transitionaler Ablösenblasen, Jahrestreffen der Fachgruppen Mehrphasenströmungen und Wärme- und Stoffübertragung, Fulda Y1 - 2014 ER - TY - JOUR A1 - Uhkötter, Stephan A1 - Becker, Adam A1 - Czajka, Holger A1 - aus der Wiesche, Stefan A1 - Brasseler, Sebastian A1 - Ehrhard, Peter T1 - Grundlagenuntersuchung zu den Strömungsverhältnissen in hochtourigen Turbinengleitlagern: Strömung in einem Konfusor mit einseitig bewegter Berandung JF - Forschung im Ingenieurwesen, Springer-Verlag Y1 - 2012 VL - Volume 76 IS - Numbers 1-2 ER - TY - JOUR A1 - Uhkoetter, Stephan A1 - Kursch, Michael A1 - Beck, Christian A1 - aus der Wiesche, Stefan T1 - Development and Validation of a Three-Dimensional Multiphase Flow Computational Fluid Dynamics Analysis for Journal Bearings in Steam and Heavy Duty Gas Turbines JF - Journal of Engineering for Gas Turbines and Power Y1 - 2012 U6 - http://dx.doi.org/10.1115/1.4007078 VL - Volume 134, Issue 10 ER - TY - CHAP A1 - Uhkoetter, Stephan A1 - Kursch, Michael A1 - Beck, Christian A1 - aus der Wiesche, Stefan T1 - Development and Validation of a Three-Dimensional Multiphase Flow CFD Analysis for Journal Bearings in Steam and Heavy Duty Gas Turbines T2 - ASME Turbo Expo Y1 - 2012 CY - Copenhagen ER - TY - CHAP A1 - Uhkoetter, Stephan A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Investigation of Flow and Mixing Phenomena in an Oil Supply Pocket of a Heavy Duty Gas Turbine Journal Bearing T2 - ASME Turbo Expo Y1 - 2013 CY - San Antonio, USA ER - TY - CHAP A1 - Uhkoetter, Stephan A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Detailed CFD Modeling of the Mixing Behavior in Oil Supply Pockets of Heavy Duty Gas and Steam Turbine Journal Bearings T2 - ASME Turbo Expo Y1 - 2014 CY - Duesseldorf, Germany ER - TY - CHAP A1 - Uhkoetter, Stephan A1 - aus der Wiesche, Stefan T1 - Turbulent Flow and Jet-Interaction in a Smooth Lid-Driven-Cavity T2 - ASME Fluids Engineering Division Summer Meeting Y1 - 2014 CY - Chicago, Illinois, USA ER - TY - CHAP A1 - Uhkoetter, Stephan A1 - aus der Wiesche, Stefan T1 - Experimental and Numerical Investigation of the Turbulent Flow in a Smooth Lid-Driven-Cavity T2 - ASME Fluids Engineering Division Summer Meeting Y1 - 2013 CY - Incline Village, Nevada, USA ER - TY - GEN A1 - Teigeler, Christian A1 - Helcig, Christian A1 - aus der Wiesche, Stefan T1 - Experimental Investigation of the Laminar Boundary Layer Flow over a Rotating Wavy Disk, IMECE2015 Houston, Texas Y1 - 2015 ER - TY - CHAP A1 - Sundermeier, Stephan A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers T2 - Proceedings European Turbomachinery Conference (ETC) 14, 12.-16.04.2021, Gdansk, Polen Y1 - 2021 ER - TY - JOUR A1 - Sundermeier, Stephan A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers JF - Int. J. Turbomachinery Propulsion Power Y1 - 2022 U6 - http://dx.doi.org/10.3390/ijtpp7020012 VL - 7 IS - 12 ER - TY - CHAP A1 - Sundermeier, Stephan A1 - Matar, Camille A1 - aus der Wiesche, Stefan A1 - Cinnella, Paola A1 - Hake, Leander A1 - Gloerfelt, Xavier T1 - Experimental and numerical study of transonic flow of an organic vapor past a circular cylinder T2 - Proceedings of the 4th International Seminar on Non Ideal Compressible Fluid Dynamics for Propulsion and Power, 3rd and 4th November 2022, City, University of London, UK Y1 - 2022 U6 - http://dx.doi.org/10.1007/978-3-031-30936-6_21 ER - TY - BOOK A1 - Steinke, Peter T1 - Finite-Element-Methode BT - Theorie und Anwendungen Y1 - 1992 SN - 3-464-48013-5 PB - Cornelsen Girardet CY - Düsseldorf ET - 1. Aufl. ER - TY - BOOK A1 - Steinke, Peter T1 - Finite-Elemente-Methode BT - Rechnergestützte Einführung Y1 - 2004 SN - 3-540-44226-X PB - Springer CY - Berlin [u.a.] ET - 1. Aufl. ER - TY - JOUR A1 - Stalinski, David A1 - Scholz, Dieter T1 - Prozessbegleitende Optimierung in der Produktionssteuerung JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Die Entwicklung einer automatisierten Produktionssteuerung in der Holzveredelung soll logistische Potenziale nutzen und Wettbewerbsvorteile sowie die Standortsicherheit erhöhen. Dies erfordert die rechnergestützte Lösung von komplexen Optimierungsaufgaben in stark begrenzter Rechenzeit. Dieser Beitrag stellt einen Ansatz für die prozessbegleitende Optimierung innerhalb der Produktionssteuerung vor, wobei die Praxistauglichkeit der Optimierungsergebnisse im Vordergrund steht. Y1 - 2018 VL - 113 IS - 5 SP - 277 EP - 280 ER - TY - CHAP A1 - Stalinski, David A1 - Scholz, Dieter T1 - Model-based approach of a decision processing unit in a smart wood-processing company T2 - Industry 4.0 N2 - The paper deals with the development of a new type of production planning and control in a wood-processing company. The production is already highly automated and data from the production processes are gathered and stored in a database. The project picks up these technical basements in order to automatically provide intelligent decisions and make the factory even smarter. Y1 - 2018 SN - 2534-8582 SP - 292 EP - 296 PB - Scientific technical union of mechanical engineering "industry 4.0" CY - Sofia ER - TY - JOUR A1 - Schultze-Granberg, J. A1 - Jantzen, H.-A. A1 - Pfeiffer, S. A1 - Pasel, R. T1 - "Städte mit gutem Klima gesucht. Die Winddurchlässigkeit von Stadtstrukturen" JF - FHocus Y1 - 2011 IS - 19 SP - 8 EP - 9 ER - TY - JOUR A1 - Schuh, Günther A1 - Häfner, Constantin A1 - Hopmann, Christian A1 - Rumpe, Bernhard A1 - Brockmann, Matthias A1 - Wortmann, Andreas A1 - Maibaum, Judith A1 - Dalibor, Manuela A1 - Bibow, Pascal A1 - Sapel, Patrick A1 - Kröger, Moritz T1 - Effizientere Produktion mit Digitalen Schatten JF - Effizientere Produktion mit Digitalen Schatten N2 - Die Digitalisierung verspricht Unternehmen, die Wandlungsfähigkeit und Produktivität bestehender Fertigungssysteme zu fördern. Durch die Komplexität cyber-physischer Produktionssysteme liegen Produktionsdaten jedoch heterogen, unstrukturiert und isoliert vor. Die für eine konkrete Aufgabe oder Fragestellung benötigten Daten werden durch Digitale Schatten zielgerichtet verknüpft, abstrahiert und aggregiert, sodass eine wissensbasierte und echtzeitfähige Entscheidungsfindung in der Produktion möglich wird. KW - Industrie 4.0 KW - Digitaler Schatten KW - Ontologie Y1 - 2020 U6 - http://dx.doi.org/10.3139/104.112339 VL - 115 IS - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb SP - 105 EP - 107 ER - TY - BOOK A1 - Scholz, Dieter A1 - Kramer, Bernd T1 - Bakunin - ?ein Denkmal! BT - Kunst, Anarchismus. Anläßlich der Präsentation aller Entwürfe in den Ausstellungsräumen der NGBK vom 14. Juni bis zum 28. Juli 1996 Y1 - 1996 SN - 3-87956-220-2 PB - Kramer CY - Berlin ET - 1. Aufl. ER - TY - BOOK A1 - Scholz, Dieter T1 - Pinsel und Dolch BT - Anarchistische Ideen in Kunst und Kunsttheorie 1840 - 1920 Y1 - 1999 SN - 3-496-01199-8 PB - Reimer CY - Berlin ET - 1. Aufl. ER - TY - BOOK A1 - Scholz, Dieter T1 - Typische Baufehler BT - Erkennen, vermeiden, beheben Y1 - 2002 SN - 3-481-01357-4 PB - Müller CY - Kön ET - 1. Aufl. ER - TY - BOOK A1 - Scholz, Dieter T1 - Typische Baufehler BT - Erkennen, vermeiden, beheben Y1 - 2005 SN - 3-481-02089-9 PB - Müller CY - Köln ET - 2., überarb. Aufl. ER - TY - CHAP A1 - Schollmeier, Jan-Niklas A1 - aus der Wiesche, Stefan T1 - A user-friendly Pitot probe data reduction Excel-Refprop-Routine for non-ideal gas flow applications T2 - Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, München Y1 - 2021 CY - München ER - TY - JOUR A1 - Schollmeier, Jan-Niklas A1 - aus der Wiesche, Stefan T1 - A user-friendly Pitot probe data reduction Excel-Refprop-Routine for non-ideal gas flow applications JF - Energy Y1 - 2022 U6 - http://dx.doi.org/10.1016/j.energy.2022.125143 VL - Volume 261, Part A IS - 15 December 2022 ER - TY - GEN A1 - Schnerr, G. H. A1 - Jantzen, H.-A. A1 - Huber, R. R. T1 - "Digital Image Processing for Schlieren Optics", EUROMECH 279 "Image Analysis as Measuring Technique in Flows", Delft University of Technology, the Netherlands, July 02-05 Y1 - 1991 ER - TY - CHAP A1 - Schnerr, G. H. A1 - Dohrmann, U. A1 - Jantzen, H.-A. A1 - Huber, R. R. T1 - " Transsonischen Strömungen mit Relaxation und Energiezufuhr durch Wasserdampfkondensation" T2 - Strömungsmechanik und Strömungsmaschinen 40 (eds. Felsch, K.O.; Marcinowski, H.; Zierep, J.) Y1 - 1989 SP - 39 EP - 79 PB - G.Braun CY - Karsruhe ER - TY - GEN A1 - Schnerr, G. H. A1 - Breitling, Th. A1 - Jantzen, H.-A. T1 - "Effects of Heat Addition on Shocks and Turbulent Boundary Layers", EUROMECH 274 "Internal High Speed Flows with Viscous/Inviscid Interactions", Prague, Czechoslovakia, April 08-11 Y1 - 1991 ER - TY - JOUR A1 - Schnerr, G. H. A1 - Bohning, R. A1 - Breitling, Th. A1 - Jantzen, H.-A. T1 - "Compressible Turbulent Boundary Lasers with Heat addition by homogeneous Condensation" JF - American Institute for Aeronautics and Astronautics (AIAA Journal) Y1 - 1992 IS - Vol 20, No. 5 SP - pp.1284 EP - 1289 ER - TY - CHAP A1 - Schmalacker, Michael A1 - Cakievski, Leon A1 - aus der Wiesche, Stefan A1 - Schatz, Markus T1 - Flow Through a Steam Turbine Cascade with a Single Damaged Blade: Effect of Blade Height on Loss and Outflow Angle Distribution T2 - Proceedings ASME Turbo Expo, 11.-17.6.2022, Rotterdam, Niederlande Y1 - 2022 U6 - http://dx.doi.org/10.1115/GT2022-80950 ER - TY - JOUR A1 - Rinker, Ulrich A1 - Terbrack, Herbert T1 - Einpress-Gewindebuchsen aus Hartkunststoff; Neuartige Verbindungstechnik verbindet Wirtschaftlichkeit und hohe Haltekraft JF - VDI-Z Y1 - 2011 VL - 153 IS - Nr. 7/8 Juli/August SP - 61 EP - 63 ER - TY - JOUR A1 - Rinker, Ulrich A1 - Schütze, Rainer T1 - Bohren mit Minmalmengenschmierung; Reduzierung der Bearbeitungszeit um 50% JF - VDI-Z Spezial Werkzeuge Y1 - 2009 IS - September 2009 SP - 51 EP - 53 ER - TY - JOUR A1 - Rinker, Ulrich T1 - Reiben und Tieflochbohren mit Minimalmengenschmierung JF - Ingenieurspiegel, Fachmagazin für Ingenieure Y1 - 2010 IS - 3/2010 SP - 8 EP - 10 ER - TY - JOUR A1 - Rinker, Ulrich T1 - Optimierung der Zerspanung durch hochwertige Messtechnik JF - Ingenieurspiegel Y1 - 2009 IS - 3 / 2009 SP - 58 EP - 60 ER - TY - JOUR A1 - Rinker, Ulrich T1 - Erfolgreiche Bearbeitung mit Minimalmengenschmierung; Stand der Technik am Beispiel der Stahlsorten St52-3 und 16MnCr5 JF - VDI-Z Spezial Werkzeuge Y1 - 2011 IS - Mai 2011 SP - 34 EP - 37 ER - TY - JOUR A1 - Rinker, Ulrich T1 - Erfolgreiche Bearbeitung mit MMS bei rostfreiem Stahl und Aluminium; Stand der Technik beim Drehen, Fräsen, Schlitzfräsen und Bohren JF - VDI-Z Spezial Werkzeuge Y1 - 2011 IS - August 2011 SP - 44 EP - 46 ER - TY - JOUR A1 - Rinker, Ulrich T1 - Halbierung der Bearbeitungszeit durch den Einsatz der Minimalmengenschmierung JF - Ingenieurspiegel, Fachmagazin für Ingenieure Y1 - 2011 IS - 3/2011 SP - 14 EP - 16 ER - TY - JOUR A1 - Rinker, Ulrich T1 - Analyse der Spanform sowie der Schnittkräfte am Beispiel des Orthogonaldrehprozesses JF - Ingenieurspiegel, Fachmagazin für Ingenieure Y1 - 2012 IS - 3/2012 SP - 51 EP - 53 ER - TY - CHAP A1 - Rinker, Ulrich T1 - Energieeffiziente Zerspanung mit Minimalmengenschmierung T2 - Forschungsreport für den Maschinenbau in Nordrhein-Westfalen Y1 - 2014 SN - 2198-395X SP - 40 EP - 43 ER - TY - JOUR A1 - Rinker, Ulrich T1 - Energieeffiziente Zerspanung mit Minimalmengenschmierung JF - Ingenieurspiegel, Fachmagazin für Ingenieure Y1 - 1000 IS - 3 SP - 41 EP - 44 ER - TY - CHAP A1 - Rejek, Jonas A1 - aus der Wiesche, Stefan A1 - Willinger, Reinhard T1 - Blade Tip Leakage Loss Reduction by Means of Passive Tip Injection: Linear Cascade Wind Tunnel Results T2 - Proceedings ASME Turbo Expo 2017 Y1 - 2017 SN - 978-0-7918-5078-7 U6 - http://dx.doi.org/10.1115/GT2017-63083 CY - Charlotte, NC ER - TY - BOOK A1 - Rejek, Jonas T1 - Verlustbestimmung im Abströmfeld einer Schaufelkaskade mit passiver Einblasung Y1 - 2017 SN - 978-3-658-18620-3 U6 - http://dx.doi.org/10.1007/978-3-658-18621-0 VL - XXII PB - Springer Spektrum CY - Wiesbaden ET - 1 ER - TY - CHAP A1 - Reinker, Felix A1 - Wagner, Robert A1 - Passmann, Maximilian A1 - Hake, Leander A1 - aus der Wiesche, Stefan T1 - Performance of a Rotatable Cylinder Pitot Probe in High Subsonic Non-ideal Gas Flows T2 - Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. Hrsg.: Matteo Pini, Carlo de Servi, Andrea Spinelli, Francesca di Mare, Alberto Guardone. ERCOFTAC Series book series (ERCO, volume 28) Y1 - 2020 SN - 978-3-030-69306-0 U6 - http://dx.doi.org/10.1007/978-3-030-69306-0 SP - 144 EP - 152 PB - Springer CY - Berlin ER - TY - JOUR A1 - Reinker, Felix A1 - Wagner, Robert A1 - Hake, Leander A1 - aus der Wiesche, Stefan T1 - High subsonic flow of an organic vapor past a circular cylinder JF - Experiments in Fluids Y1 - 2021 VL - 62 IS - 54 ER - TY - JOUR A1 - Reinker, Felix A1 - Kenig, Eugeny Y. A1 - Passmann, Max A1 - aus der Wiesche, Stefan T1 - Closed Loop Organic Wind Tunnel (CLOWT): Design, Components and Control System. JF - Energy Procedia Y1 - 2017 VL - 129 SP - 200 EP - 207 ER - TY - CHAP A1 - Reinker, Felix A1 - Kenig, Eugeny Y. A1 - aus der Wiesche, Stefan T1 - CLOWT: A Multifunctional Test Facility for the Investigation of Organic Vapor Flows T2 - Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15–20 Y1 - 2018 CY - Montreal, Quebec, Canada ER - TY - CHAP A1 - Reinker, Felix A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - Boiling under Hele-Shaw Flow Conditions: The Occurrence of Viscous Fingering T2 - Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition (IMECE2013) Y1 - 2013 CY - San Diego, CA ER - TY - GEN A1 - Reinker, Felix A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - Untersuchung des Blasensiedens unter Hele-Shaw Strömungsbedingungen, Jahrestreffen der Fachgruppen Fluidverfahrenstechnik Wärme- und Stoffübertragung, 20. - 21. März 2013, Baden Baden Y1 - 2013 ER - TY - JOUR A1 - Reinker, Felix A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - Fingering during Boiling under Hele-Shaw Flow Conditions JF - Journal of Heat Transfer Y1 - 2014 VL - 136 IS - 8 SP - 080914 EP - 1 ER - TY - JOUR A1 - Reinker, Felix A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - Boiling under Hele-Shaw Flow Conditions: The Occurrence of Viscous Fingering JF - Journal of Heat Transfer Y1 - 2016 VL - 138 IS - 2 SP - 021501 EP - 8 ER - TY - CHAP A1 - Reinker, Felix A1 - Hasselmann, Karsten A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Thermodynamics and Fluid Mechanics of a Closed Blade Cascade Wind Tunnel for Organic Vapors T2 - Proceedings of ASME Turbo Expo Y1 - 2015 U6 - http://dx.doi.org/10.1115/GT2015-42372 CY - Montreal, Canada ER - TY - JOUR A1 - Reinker, Felix A1 - Hasselmann, Karsten A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Thermodynamics and Fluid Mechanics of a Closed Blade Cascade Wind Tunnel for Organic Vapors JF - Journal of Engineering for Gas Turbines and Power Y1 - 2015 U6 - http://dx.doi.org/10.1115/1.4031390 VL - 138 IS - 5 ER - TY - CHAP A1 - Reinker, Felix A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Closed Loop Organic Vapor Wind Tunnel CLOWT: Commissioning and Operational Experience T2 - Proceedings 5th International Seminar on ORC Power Systems Y1 - 2019 CY - Athen, Griechenland ER - TY - CHAP A1 - Reinker, Felix A1 - aus der Wiesche, Stefan A1 - Fritsche, Manuel A1 - Epple, Philipp A1 - Russwurm, Hans Jörg T1 - Testing, modeling and simulation of fans working with organic vapors T2 - Proceedings ETC13, 2019, Lausanne, Schweiz (Beitrag: ETC2019-326) Y1 - 2019 ER - TY - CHAP A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Application of Hot-Wire Anemometry in the High Subsonic Organic Vapor Flow Regime T2 - Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. Hrsg.: Matteo Pini, Carlo de Servi, Andrea Spinelli, Francesca di Mare, Alberto Guardone. ERCOFTAC Series book series (ERCO, volume 28) Y1 - 2020 SN - 978-3-030-69306-0 U6 - http://dx.doi.org/10.1007/978-3-030-69306-0 SP - 135 EP - 143 PB - Springer CY - Berlin ER - TY - CHAP A1 - Putz, Matthias A1 - Brecher, Christian A1 - Brockmann, Matthias T1 - Energieflexibilität im Maschinen- und Anlagenbau T2 - Energieflexibilität in der Deutschen Industrie: Ergebnisse aus dem Kopernikus-Projekt - Synchronisierte und energieadaptive Produktionstechnik zur flexiblen Ausrichtung von Industrieprozessen auf eine fluktuierende Energieversorgung (SynErgie). Hrsg. Sauer, Abele, Buhl N2 - Energie aus erneuerbaren Ressourcen ist nicht immer beliebig verfügbar. Je nach Jahreszeit und Witterung variiert beispielsweise die durch Solarparks oder Windkraftanlagen zur Verfügung gestellte Leistung. Durch den kontinuierlichen Ausbau der erneuerbaren Energien wird sich die Volatilität im Energiesystem in Zukunft immer stärker ausprägen. Die Industrie auf die sich ändernden Versorgungsstrukturen vorzubereiten und anzupassen ist eine große Herausforderung der nächsten Jahrzehnte. Unternehmen müssen zukünftig ihre Prozesse und Betriebsorganisation so gestalten können, dass sich der Energieverbrauch zumindest in Teilen flexibel an das volatile Energieangebot anpassen kann. Neben der Entwicklung von Technologien, Konzepten und Maßnahmen zur energetischen Flexibilisierung von industriellen Prozessen liegt ein zweiter Schwerpunkt zukünftiger Arbeiten auf der Entwicklung einer durchgängigen IT-Infrastruktur, mit der Unternehmen und Energieanbieter in Zukunft Informationen von der Produktionsmaschine bis zu den Energiemärkten bereitstellen und austauschen können. Dies führt zu einem Paradigmenwechsel im Betrieb industrieller Prozesse – weg vom kontinuierlichen und rein nachfragegetriebenen Energieverbrauch hin zum anpassbaren, energieflexiblen Betrieb industrieller Anlagen. KW - Energieflexibilität Y1 - 2019 SN - 978-3-8396-1479-2 SP - 644 EP - 675 PB - Fraunhofer Verlag ER - TY - JOUR A1 - Pennekamp, Jan A1 - Buchholz, Erik A1 - Dahlmanns, Markus A1 - Kunze, Ike A1 - Braun, Stefan A1 - Wagner, Eric A1 - Brockmann, Matthias A1 - Wehrle, Klaus A1 - Henze, Martin T1 - Collaboration is not Evil: A Systematic Look at Security Research for Industrial Use JF - Learning from Authoritative Security Experiment Results (LASER) 2020 N2 - Following the recent Internet of Things-induced trends on digitization in general, industrial applications will further evolve as well. With a focus on the domains of manufacturing and production, the Internet of Production pursues the vision of a digitized, globally interconnected, yet secure environment by establishing a distributed knowledge base. Background. As part of our collaborative research of advancing the scope of industrial applications through cybersecurity and privacy, we identified a set of common challenges and pitfalls that surface in such applied interdisciplinary collaborations. Aim. Our goal with this paper is to support researchers in the emerging field of cybersecurity in industrial settings by formalizing our experiences as reference for other research efforts, in industry and academia alike. Method. Based on our experience, we derived a process cycle of performing such interdisciplinary research, from the initial idea to the eventual dissemination and paper writing. This presented methodology strives to successfully bootstrap further research and to encourage further work in this emerging area. Results. Apart from our newly proposed process cycle, we report on our experiences and conduct a case study applying this methodology, raising awareness for challenges in cybersecurity research for industrial applications. We further detail the interplay between our process cycle and the data lifecycle in applied research data management. Finally, we augment our discussion with an industrial as well as an academic view on this research area and highlight that both areas still have to overcome significant challenges to sustainably and securely advance industrial applications. Conclusions. With our proposed process cycle for interdisciplinary research in the intersection of cybersecurity and industrial application, we provide a foundation for further research. We look forward to promising research initiatives, projects, and directions that emerge based on our methodological work. KW - Data security KW - Industrie 4.0 KW - Internet of Things Y1 - 2021 UR - https://www.comsys.rwth-aachen.de/fileadmin/papers/2021/2021-pennekamp-laser-collaboration.pdf U6 - http://dx.doi.org/10.14722/laser-acsac.2020.23088 ER - TY - CHAP A1 - Passmann, Maximilian A1 - Reinker, Felix A1 - Hasselmann, Karsten A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Development and Design of a Two-Stage Contraction Zone and Test Section of an Organic Rankine Cycle Wind Tunnel T2 - ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition Y1 - 2016 SN - 978-0-7918-4974-3 U6 - http://dx.doi.org/10.1115/GT2016-56580 ER - TY - GEN A1 - Passmann, Maximilian A1 - Hasselmann, Karsten A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Thermal Expansion and Structural Behavior of a Closed Loop Thermal Wind Tunnel for ORC Fluids. Poster Session, ASME ORC 2015, Brussels, Belgium Y1 - 2015 ER - TY - JOUR A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Povey, Thomas A1 - Bergmann, Detlef T1 - Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe JF - ASME Journal of Turbomachinery Y1 - 2021 VL - 143 IS - 9 SP - 091003 (9 pages) ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Povey, Thomas A1 - Bergmann, Detlef T1 - Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe T2 - Proceedings ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21–25, 2020, Virtual, Online, GT2020-16074, V005T05A028; 12 pages Y1 - 2020 ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - On the Low and High Speed Flow of Gases Through Pillow Plate Channels T2 - Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019, San Francisco, California, USA, AJKFluids2019-4933, V001T01A049; 9 pages Y1 - 2019 ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz A1 - Willinger, Reinhard T1 - The Physical Mechanism of Tip Leakage Loss Reduction by Means of Passive Injection in Low Mach Number Flows T2 - Proceedings Turbo Expo 2018 Y1 - 2018 CY - Oslo, Norwegen ER - TY - JOUR A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - A one-dimensional analytical calculation method for obtaining normal shock losses in supersonic real gas flows JF - Journal of Physics: Conference Series Y1 - 2017 U6 - http://dx.doi.org/10.1088/1742-6596/8 21/1/01200 4 VL - 821 IS - 1 ER - TY - JOUR A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Numerical Calibration of Three-Dimensional Printed Five-Hole Probes for the Transonic Flow Regime JF - ASME Journal of Fluids Engineering Y1 - 2021 VL - 143 IS - 5 SP - 051501 (12 pages) ER - TY - JOUR A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Focusing schlieren visualization of transonic turbine tip-leakage flows JF - Int. J. Turbomachinery Propulsion Power Y1 - 2020 U6 - http://dx.doi.org/10.3390/ijtpp5010001 VL - 5 IS - 1 ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Numerical Calibration of 3D Printed Five-Hole Probes for the Transonic Flow Regime T2 - Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019, San Francisco, California, USA, AJKFluids2019-4706, V004T04A017; 11 pages Y1 - 2019 ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Focusing schlieren visualization of transonic turbine tip-leakage flows T2 - Proceedings ETC13 Y1 - 2019 CY - Lausanne, Schweiz ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - An Experimental and Numerical Study of Tip-Leakage Flows in an Idealized Turbine Tip Gap at High Mach Numbers T2 - Proceedings Turbo Expo 2018 Y1 - 2018 CY - Oslo, Norwegen ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan T1 - Development and Commissioning of a Supersonic Blow Down Wind Tunnel for Educational Purposes T2 - Proceedings ASME 2017 Fluids Engineering Division Summer Meeting Y1 - 2017 SN - 978-0-7918-5808-0 U6 - http://dx.doi.org/10.1115/FEDSM2017-69196 CY - Waikoloa, Hawaii ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan T1 - A Detailed Experimental and Numerical Investigation of Flow Structures in a Turbine Tip Gap With Passive Injection T2 - Proceedings ASME 2017 Fluids Engineering Division Summer Meeting Y1 - 2017 SN - 978-0-7918-5804-2 U6 - http://dx.doi.org/10.1115/FEDSM2017-69195 CY - Waikoloa, Hawaii ER - TY - JOUR A1 - Mulatz, Reinhold A1 - Jantzen, H.-A. T1 - Preise für erfolgreiche Zusammenarbeit, technologietransfer, Seifriz Preis 2013 JF - Handwerk magazin Y1 - 2013 SN - 0942-8976 IS - 11 SP - 20 EP - 23 ER - TY - CHAP A1 - Matar, Camille A1 - Cinnella, Paola A1 - Gloerfelt, Xavier A1 - Sundermeier, Stephan A1 - Hake, Leander A1 - aus der Wiesche, Stefan T1 - Numerical investigation of the transonic nonideal gas flow around a circular cylinder at high Reynolds number T2 - Proceedings 13th ERCOFTAC Workshop on Direct & Large Eddy Simulation, 26-28 October 2022, Udine, Italy Y1 - 2022 ER - TY - JOUR A1 - Matar, Camille A1 - Cinnella, Paola A1 - Gloerfelt, Xavier A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Investigation of non-ideal gas flows around a circular cylinder JF - Energy Y1 - 2023 U6 - http://dx.doi.org/10.1016/j.energy.2022.126563 VL - Volume 268 IS - 1 April 2023 ER - TY - JOUR A1 - Kapitz, Marek A1 - Teigeler, Christian A1 - Wagner, Robert A1 - Helcig, Christian A1 - aus der Wiesche, Stefan T1 - Experimental study of the influence of the Prandtl number on the convective heat transfer from a square cylinder JF - International Journal of Heat and Mass Transfer Y1 - 2018 U6 - http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.12.032 VL - 120 ER - TY - CHAP A1 - Kapitz, Marek A1 - Schütz, Franziska A1 - Eva Telgen, A1 - aus der Wiesche, Stefan T1 - ROTATING MINISCUS DURING HELE-SHAW FLOW BOILING OFWATER UNDER SUBATMOSPHERIC PRESSURE WITH JET IMPINGEMENT T2 - 10th International Conference on Boiling and Condensation Heat Transfe r 12th-15th March 2018 in Nagasaki, Japan Y1 - 2018 SP - 1 EP - 2 ER - TY - JOUR A1 - Kapitz, Marek A1 - Schmiedinghoff, Lars A1 - Lüling, Sammy Joe A1 - aus der Wiesche, Stefan T1 - Impact of surface parameters on confined boiling heat transfer in a Hele-Shaw cell JF - Heat and Mass Transfer Y1 - 2019 U6 - http://dx.doi.org/10.1007/s00231-019-02604-2 VL - 55 SP - 2533 EP - 2544 ER - TY - GEN A1 - Kapitz, Marek A1 - Reinker, Felix A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny A1 - Gambaryan-Roisman, Tatiana A1 - Stephan, Peter T1 - Viskose Fingerbildung und der Wärmeübergang beim Blasensieden in einer Hele-Shaw Zelle, Jahrestreffen der Fachgruppen Mehrphasenströmungen und Wärme- und Stoffübertragung, 24. - 25. März 2014, Fulda Y1 - 2014 ER - TY - CHAP A1 - Kapitz, Marek A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Viscous Fingering and Heat Transfer During Boiling in a Hele-Shaw Cell T2 - Proceedings of the HEAT TRANSFER and FLUID FLOW in MICROSCALE (HTFFM-V) Y1 - 2014 CY - Marseille, FRA ER - TY - JOUR A1 - Kapitz, Marek A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Viscous fingering and heat transfer during boiling in a Hele-Shaw cell JF - Experimental Thermal Fluid Science Y1 - 2015 VL - 67 SP - 18 EP - 23 ER - TY - GEN A1 - Kapitz, Marek A1 - Becker, Adam A1 - aus der Wiesche, Stefan T1 - Einfluss der thermophysikalischen Heizwandeigenschaften beim Behältersieden mittels Diamant- und Siliciumcarbidheizern, Jahrestreffen der Fachgruppe Wärme- und Stoffübertragung, 22. - 23. März 2012, Weimar Y1 - 2012 ER - TY - JOUR A1 - Kapitz, Marek A1 - Becker, Adam A1 - aus der Wiesche, Stefan T1 - Influence of Thermophysical Wall Properties During Pool Boiling on Large Diamond and SiC Heaters JF - Heat Transfer Engineering Y1 - 2014 VL - 35 IS - 5 SP - 472 EP - 481 ER - TY - CHAP A1 - Kapitz, Marek A1 - Becker, Adam A1 - aus der Wiesche, Stefan T1 - Influence of thermophysical wall properties during pool boiling on large diamond and SiC heaters T2 - Proceedings ECI 8th International Conference on Boiling and Condensation Heat Transfer Y1 - 2012 CY - Lausanne, Switzerland ER - TY - CHAP A1 - Kapitz, Marek A1 - Becker, Adam A1 - aus der Wiesche, Stefan T1 - Influence of Wall Thermal Conductivity during Pool Boiling on Diamond and SiC Heaters T2 - Proceedings of the ASME 2012 Summer Heat Transfer Conference Y1 - 2012 SP - HT2012 EP - 58047 CY - Puerto Rico ER - TY - JOUR A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan A1 - Kadic, Samir A1 - Strehle, Steffen T1 - An experimental test of the Mocikat-Herwig theory of local turbulent heat transfer measurements on cold objects JF - Heat and Mass Transfer N2 - Experimental results are presented of a test of the theory of local turbulent heat transfer measurements proposed by Mocikat and Herwig in 2007. A miniaturized multi-layer heat transfer sensor was developed and employed in this study. The new heat transfer sensor was designed to work in air and liquids, and this capability enabled the simultaneous investigation of different Prandtl numbers. Two basic configurations, namely the flow past a blunt plate and the flow past an inclined square cylinder, were investigated in test sections of wind and water tunnels. Convective heat transfer coefficients were obtained through conventional testing (i.e., employing thoroughly heated test objects) and using the new miniaturized sensor approach (i.e., utilizing cold test objects without heating). The main prediction of the Mocikat-Herwig theory that a specific thermal adjustment coefficient of the employed actual miniaturized heat transfer sensor should exist in the fully turbulent flow regime was proven for developed two-dimensional flow. The observed effect of the Prandtl number on this coefficient was in good agreement with the prediction of the asymptotic expansion method. The square cylinder results indicated the inherent limits of the local turbulent heat transfer measurement approach, as suggested by Mocikat and Herwig. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-142353 ER - TY - CHAP A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - CONFINED BOILING HEAT TRANSFER, TWO-PHASE FLOW PATTERNS, AND JET IMPINGEMENT IN A HELE-SHAW CELL T2 - Proceedings ECI 9th International Conference on Boiling and Condensation Heat Transfer Y1 - 2015 CY - Boulder, CO ER - TY - GEN A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - Rotating Liquid Jet during Boiling under Hele-Shaw Flow Conditions, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE2014), Montreal, Canada, Nov. 14-20, 2014 Y1 - 2014 ER - TY - GEN A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - Wärmeübergang und Strömungsformen in einer Hele-Shaw Siedezelle mittels Prallstrahl, Jahrestreffen der Fachgruppen Trocknungstechnik und Wärme- und Stoffübertragung, 4. - 6. März 2015, Leipzig Y1 - 2015 ER - TY - JOUR A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - Confined Boiling Heat Transfer, Two-Phase Flow Patterns, and Jet Impingement in a Hele-Shaw Cell JF - Heat Transfer Engineering Y1 - 2017 VL - 38 IS - 3 SP - 290 EP - 302 ER - TY - JOUR A1 - Kapitz, Marek A1 - aus der Wiesche, Stefan T1 - The Effect of the Location of Nucleation Sites on the Thermal-Hydraulic Stability of a Short-Tube Natural Circulation Loop JF - Journal of Engineering for Gas Turbines and Power Y1 - 2012 VL - 134 IS - 6 SP - 062901 EP - 8 ER - TY - JOUR A1 - Jarke, Matthias A1 - Schuh, Günther A1 - Brecher, Christian A1 - Brockmann, Matthias A1 - Prote, Jan-Phillip T1 - Digital Shadows in the Internet of Production JF - ERCIM News 115 Special Theme: Digital Twins N2 - Due to highly sophisticated, specialised models and data in production, digital twins, as defined as full digital representations, are neither computationally feasible nor useful. The complementary concept of digital shadows will provide cross-domain data access in real time by combining reduced engineering models and production data analytics. KW - Digital Twin KW - Industrie 4.0 KW - Production Y1 - 2018 UR - https://ercim-news.ercim.eu/en115/special/2104-digital-shadows-in-the-internet-of-production ER - TY - CHAP A1 - Jantzen, Hans-Arno A1 - Annas, Sven A1 - Elfring, Michael A1 - Scholz, Jürgen A1 - Heller, Andreas A1 - Janoschke, Uwe A1 - Buntkiel, Lukas ED - Nelles, Prof. Dr. Michael T1 - Rühr-und Mischvorgänge in Biogasanlagen: Potentiale und Erfolgschancen T2 - Schriftenreihe Umweltingenieurwesen Band 95 Tagungsband universität Rostock KW - Biogas KW - Optimierung KW - Rührtechnik Y1 - 2020 UR - https://bioenergieforum.auf.uni-rostock.de/files/Tagungsband.pdf SN - 978-3-86009-507-2 U6 - http://dx.doi.org/https://doi.org/10.18453/rosdok_id00002650 SP - 185 EP - 194 PB - Universität Rostock CY - Rostock ER - TY - BOOK A1 - Jantzen, H.-A. A1 - Wetter, Ch. T1 - Abschlussbericht zum Forschungsvorhaben "Entwicklung neuer, effizienter Trocknersysteme zur energieoptimalen Trocknung von Biomasse-Gärresten mit Hilfe der numerischen Strömungssimulation" 2012- 2014 gefördert durch das BMBF Y1 - 2015 PB - TIB Uni Hannover ER - TY - JOUR A1 - Jantzen, H.-A. A1 - Schley, St. T1 - "Gut gekühlt und gestochen scharf" JF - Wirtschaftsspiegel, Technologietransfer Wissenschaft-Wirtschaft Y1 - 2006 IS - 11 ER - TY - BOOK A1 - Jantzen, H.-A. A1 - Rinker, U. A1 - Krohner, T. A1 - Lux, J. A1 - Tietmeyer, M. T1 - "Neue Methoden zur theoretischen und experimentellen Untersuchung des Fließverhaltens metallischer Werkstoffe beim Zerspanungsprozess mit Hilfe der numerischen Strömungssimulation (CFD)", Abschlussbericht zum FH ProfUnt-Projekt 2007-2010, Steinfurt Y1 - 2011 ER - TY - GEN A1 - Jantzen, H.-A. A1 - Rinker, U. A1 - Krohner, T. A1 - Lux, J. A1 - Tietmeyer, M. T1 - "Neue Methoden zur Untersuchung des Fließverhaltens metallischer Werkstoffe beim Zerspanungsprozess mit Hilfe der numerischen Strömungssimulation (CFD)"; Ergebnispräsentation zum FH ProfUnt-Projekt gleichen Titels, Internationale ANSYS Anwendertagung , Kongresszentrum Stuttgart Y1 - 2011 ER - TY - JOUR A1 - Jantzen, H.-A. A1 - Rinker, U. T1 - "Neuer Berechnungsansatz zur Simulation von Zerspanungsvorgängen" JF - Ingenieurspiegel Y1 - 2011 IS - 3 SP - 37 EP - 38 ER -