TY - CHAP A1 - Huser, Lukas A1 - aus der Wiesche, Stefan T1 - Influence of Casing Roughness on the Tip-Leakage Loss in a Linear Turbine Cascade T2 - Proceedings ASME Turbo Expo, June 26–30, 2023, Boston, MA, GT2023-103119 Y1 - 2023 ER - TY - CHAP A1 - Schmalacker, Michael A1 - Cakievski, Leon A1 - aus der Wiesche, Stefan A1 - Schatz, Markus T1 - Flow Through a Steam Turbine Cascade with a Single Damaged Blade: Effect of Blade Height on Loss and Outflow Angle Distribution T2 - Proceedings ASME Turbo Expo, 11.-17.6.2022, Rotterdam, Niederlande Y1 - 2022 U6 - http://dx.doi.org/10.1115/GT2022-80950 ER - TY - JOUR A1 - Cati, Yusuf A1 - aus der Wiesche, Stefan A1 - Düzgün, Mesut T1 - Numerical Model of the Railway Brake Disk for the Temperature and Axial Thermal Stress Analyses JF - ASME Journal of Thermal Science and Engineering Applications Y1 - 2022 U6 - http://dx.doi.org/10.1115/1.4054213 VL - 14 IS - 10 ER - TY - CHAP A1 - Hake, Leander A1 - Sundermeier, Stephan A1 - aus der Wiesche, Stefan T1 - Profile Loss Prediction for Organic Rankine Cycle Turbines: An Experimental Case Study T2 - Proceedings 15th European Turbomachinery Conference (ETC15) Turbomachinery, Fluid Dynamics and Thermodynamics, 24-28 April 2023, Budapest, Hungary Y1 - 2023 ER - TY - CHAP A1 - Bienner, Aurélien A1 - Gloerfelt, Xavier A1 - Cinnella, Paola A1 - Hake, Leander A1 - aus der Wiesche, Stefan T1 - Numerical investigation of a transonic dense gas flow over an idealized blade vane configuration T2 - Proceedings ORC 2023, Sevilla, 4. - 6. September 2023, Spanien Y1 - 2023 ER - TY - CHAP A1 - Hake, Leander A1 - Sundermeier, Stephan A1 - aus der Wiesche, Stefan A1 - Matar, Camille A1 - Cinnella, Paola A1 - Gloerfelt, Xavier T1 - Investigation of the turbulence level and the vortex shedding in a turbine cascade working with an organic vapor at subsonic Mach numbers T2 - Proceedings ORC 2023, Sevilla, 4. - 6. September 2023, Spanien Y1 - 2023 ER - TY - CHAP A1 - Hake, Leander A1 - Sundermeier, Stephan A1 - aus der Wiesche, Stefan A1 - Passmann, Maximilian T1 - Calibration of multi-hole probes for measurements in compressible organic vapor flows T2 - Proceedings ORC 2023, Sevilla, 4.-6. September 2023, Spanien Y1 - 2023 ER - TY - JOUR A1 - Matar, Camille A1 - Cinnella, Paola A1 - Gloerfelt, Xavier A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Investigation of non-ideal gas flows around a circular cylinder JF - Energy Y1 - 2023 U6 - http://dx.doi.org/10.1016/j.energy.2022.126563 VL - Volume 268 IS - 1 April 2023 ER - TY - JOUR A1 - aus der Wiesche, Stefan T1 - Experimental Investigation Techniques for Non-Ideal Compressible Fluid Dynamics JF - Int. J. Turbomach. Propuls. Power 2023, 8(2), 11 Y1 - 2023 U6 - http://dx.doi.org/10.3390/ijtpp8020011 VL - 8 IS - 2 ER - TY - JOUR A1 - Hake, Leander A1 - Sundermeier, Stephan A1 - Cakievski, Leon A1 - Bäumer, Joshua A1 - aus der Wiesche, Stefan A1 - Matar, Camille A1 - Cinnella, Paola A1 - Gloerfelt, Xavier T1 - Hot-Wire Anemometry in High Subsonic Organic Vapor Flows JF - ASME J. Turbomach. Y1 - 2023 U6 - http://dx.doi.org/10.1115/1.4062676 VL - 145 IS - 9 ER - TY - CHAP A1 - Bienner, Aurélien A1 - Cinnella, Paola A1 - Gloerfelt, Xavier A1 - Hake, Leander A1 - aus der Wiesche, Stefan A1 - Strehle, Steffen T1 - STUDY OF BYPASS TRANSITION IN DENSE-GAS BOUNDARY LAYERS T2 - Proceedings 12th International Symposium on Turbulence and Shear Flow Phenomena (TSFP12) Osaka, Japan (Online), July 19-22, 2022 Y1 - 2022 ER - TY - CHAP A1 - Hake, Leander A1 - Sundermeier, Stephan A1 - Cakievski, Leon A1 - Bäumer, Joshua A1 - aus der Wiesche, Stefan A1 - Matar, Camille A1 - Cinnella, Paola A1 - Gloerfelt, Xavier T1 - Hot-Wire Anemometry in High Subsonic Organic Vapor Flows T2 - Proceedings ASME Turbo Expo, 11.-17.6.2022, Rotterdam Y1 - 2022 U6 - http://dx.doi.org/10.1115/GT2022-81686 ER - TY - CHAP A1 - Hake, Leander A1 - Sundermeier, Stephan A1 - aus der Wiesche, Stefan A1 - Bienner, Aurélien A1 - Gloerfelt, Xavier A1 - Matar, Camille A1 - Cinnella, Paola T1 - CFD-SUPPORTED DATA REDUCTION OF HOT-WIRE ANEMOMETRY SIGNALS FOR COMPRESSIBLE ORGANIC VAPOR FLOWS T2 - Proceedings XXVI Biennial Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines, 28 – 30 September 2022, Pisa, Italien Y1 - 2022 ER - TY - CHAP A1 - Matar, Camille A1 - Cinnella, Paola A1 - Gloerfelt, Xavier A1 - Sundermeier, Stephan A1 - Hake, Leander A1 - aus der Wiesche, Stefan T1 - Numerical investigation of the transonic nonideal gas flow around a circular cylinder at high Reynolds number T2 - Proceedings 13th ERCOFTAC Workshop on Direct & Large Eddy Simulation, 26-28 October 2022, Udine, Italy Y1 - 2022 ER - TY - CHAP A1 - Sundermeier, Stephan A1 - Matar, Camille A1 - aus der Wiesche, Stefan A1 - Cinnella, Paola A1 - Hake, Leander A1 - Gloerfelt, Xavier T1 - Experimental and numerical study of transonic flow of an organic vapor past a circular cylinder T2 - Proceedings of the 4th International Seminar on Non Ideal Compressible Fluid Dynamics for Propulsion and Power, 3rd and 4th November 2022, City, University of London, UK Y1 - 2022 U6 - http://dx.doi.org/10.1007/978-3-031-30936-6_21 ER - TY - CHAP A1 - Hake, Leander A1 - aus der Wiesche, Stefan A1 - Sundermeier, Stephan A1 - Bienner, Aurélien A1 - Gloerfelt, Xavier A1 - Cinnella, Paola T1 - Grid-generated decaying turbulence in an organic vapor flow T2 - Proceedings of the 4th International Seminar on Non Ideal Compressible Fluid Dynamics, 3rd and 4th November 2022, City, University of London, UK Y1 - 2022 U6 - http://dx.doi.org/10.1007/978-3-031-30936-6_18 ER - TY - JOUR A1 - Schollmeier, Jan-Niklas A1 - aus der Wiesche, Stefan T1 - A user-friendly Pitot probe data reduction Excel-Refprop-Routine for non-ideal gas flow applications JF - Energy Y1 - 2022 U6 - http://dx.doi.org/10.1016/j.energy.2022.125143 VL - Volume 261, Part A IS - 15 December 2022 ER - TY - JOUR A1 - aus der Wiesche, Stefan A1 - Reinker, Felix T1 - Dimensional analysis and performance laws for organic vapor flow turbomachinery JF - Energy Y1 - 2022 U6 - http://dx.doi.org/10.1016/j.energy.2022.124635 VL - 257 IS - 15 October 2022 ER - TY - JOUR A1 - Hake, Leander A1 - Reinker, Felix A1 - Wagner, Robert A1 - aus der Wiesche, Stefan A1 - Schatz, Markus T1 - The Profile Loss of Additive Manufactured Blades for Organic Rankine Cycle Turbines JF - Int. J. Turbomachinery Propulsion Power Y1 - 2022 U6 - http://dx.doi.org/10.3390/ijtpp7010011 VL - 7 IS - 11 ER - TY - JOUR A1 - Sundermeier, Stephan A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers JF - Int. J. Turbomachinery Propulsion Power Y1 - 2022 U6 - http://dx.doi.org/10.3390/ijtpp7020012 VL - 7 IS - 12 ER - TY - JOUR A1 - Reinker, Felix A1 - Wagner, Robert A1 - Hake, Leander A1 - aus der Wiesche, Stefan T1 - High subsonic flow of an organic vapor past a circular cylinder JF - Experiments in Fluids Y1 - 2021 VL - 62 IS - 54 ER - TY - JOUR A1 - aus der Wiesche, Stefan T1 - Numerical heat transfer and thermal engineering of AdBlue (SCR) tanks for combustion engine emission reduction JF - Applied Thermal Engineering Y1 - 2007 SP - 1790 EP - 1798 ER - TY - JOUR A1 - aus der Wiesche, Stefan T1 - Large-eddy-simulation study of an air flow past a heated square cylinder JF - Heat and Mass Transfer Y1 - 2007 SP - 515 EP - 525 ER - TY - JOUR A1 - aus der Wiesche, Stefan T1 - Heat transfer from a rotating disk in a parallel air crossflow JF - International Journal of Thermal Science Y1 - 2007 SP - 745 EP - 754 ER - TY - JOUR A1 - aus der Wiesche, Stefan T1 - The Cauchy surface wave problem from the viewpoint of a VOF method JF - Computational Mechanics Y1 - 2007 SP - 141 EP - 152 ER - TY - JOUR A1 - aus der Wiesche, Stefan T1 - The collapse of micro cavitation bubbles JF - Forschung im Ingenieurwesen Y1 - 2008 SP - 175 EP - 182 ER - TY - JOUR A1 - aus der Wiesche, Stefan T1 - Sloshing dynamics of a viscous liquid in a spinning horizontal cylinder tank JF - Journal of Aerospace Science and Technology Y1 - 2008 SP - 448 EP - 456 ER - TY - CHAP A1 - aus der Wiesche, Stefan T1 - Heat transfer from rotating discs with finite thickness subjected to outer air streams T2 - Proceedings 14th International Heat Transfer Conference, Washington D. C. Y1 - 2010 ER - TY - JOUR A1 - Frinkl, Claus-Martin A1 - Bardas, Ufuk A1 - Weyck, Alexander A1 - aus der Wiesche, Stefan T1 - Experimental study of the convective heat transfer from a rotating disc subjected to forced air streams JF - International Journal of Thermal Science Y1 - 2010 SP - 73 EP - 80 ER - TY - JOUR A1 - Augspurger, Thorsten A1 - Klocke, Fritz A1 - Döbbeler, Benjamin A1 - Brockmann, Matthias A1 - Gierlings, Sascha A1 - Lima, Adriana T1 - Modeling of Transient Thermal Conditions in Cutting JF - Journal of Mechanics in Engineering and Automation N2 - The thermal conditions like the temperature distribution and the heat fluxes during metal cutting have a major influence on the machinability, the tool lifetime, the metallurgical structure and thus the functionality of the work piece. This in particular applies for manufacturing processes like milling, drilling and turning for high-value turbomachinery components like impellers, combustion engines and compressors of the aerospace and automotive industry as well as energy generation, which play a major role in modern societies. However, numerous analytical and experimental efforts have been conducted in order to understand the thermal conditions in metal cutting, yet many questions still prevail. Most models are based on a stationary point of view and do not include time dependent effects like in intensity and distribution varying heat sources, varying engagement conditions and progressive tool wear. In order to cover such transient physics an analytical approach based on Green’s functions for the solution of the partial differential equations of unsteady heat conduction in solids is used to model entire transient temperature fields. The validation of the model is carried out in orthogonal cutting experiments not only punctually but also for entire temperature fields. For these experiments an integrated measurement of prevailing cutting force and temperature fields in the tool and the chip by means of high-speed thermography were applied. The thermal images were analyzed with regard to thermodynamic energy balancing in order to derive the heat partition between tool, chips and workpiece. The thus calculated heat flow into the tool was subsequently used in order to analytically model the transient volumetric temperature fields in the tool. The described methodology enables the modeling of the transient thermal state in the cutting zone and particular in the tool, which is directly linked to phenomena like tool wear and workpiece surface modifications. KW - Zerspanung KW - Temperatur KW - Infrarotkamera Y1 - 2017 U6 - http://dx.doi.org/10.17265/2159-5275/2017.03.001 IS - 7-1 SP - 113 EP - 120 ER - TY - CHAP A1 - Putz, Matthias A1 - Brecher, Christian A1 - Brockmann, Matthias T1 - Energieflexibilität im Maschinen- und Anlagenbau T2 - Energieflexibilität in der Deutschen Industrie: Ergebnisse aus dem Kopernikus-Projekt - Synchronisierte und energieadaptive Produktionstechnik zur flexiblen Ausrichtung von Industrieprozessen auf eine fluktuierende Energieversorgung (SynErgie). Hrsg. Sauer, Abele, Buhl N2 - Energie aus erneuerbaren Ressourcen ist nicht immer beliebig verfügbar. Je nach Jahreszeit und Witterung variiert beispielsweise die durch Solarparks oder Windkraftanlagen zur Verfügung gestellte Leistung. Durch den kontinuierlichen Ausbau der erneuerbaren Energien wird sich die Volatilität im Energiesystem in Zukunft immer stärker ausprägen. Die Industrie auf die sich ändernden Versorgungsstrukturen vorzubereiten und anzupassen ist eine große Herausforderung der nächsten Jahrzehnte. Unternehmen müssen zukünftig ihre Prozesse und Betriebsorganisation so gestalten können, dass sich der Energieverbrauch zumindest in Teilen flexibel an das volatile Energieangebot anpassen kann. Neben der Entwicklung von Technologien, Konzepten und Maßnahmen zur energetischen Flexibilisierung von industriellen Prozessen liegt ein zweiter Schwerpunkt zukünftiger Arbeiten auf der Entwicklung einer durchgängigen IT-Infrastruktur, mit der Unternehmen und Energieanbieter in Zukunft Informationen von der Produktionsmaschine bis zu den Energiemärkten bereitstellen und austauschen können. Dies führt zu einem Paradigmenwechsel im Betrieb industrieller Prozesse – weg vom kontinuierlichen und rein nachfragegetriebenen Energieverbrauch hin zum anpassbaren, energieflexiblen Betrieb industrieller Anlagen. KW - Energieflexibilität Y1 - 2019 SN - 978-3-8396-1479-2 SP - 644 EP - 675 PB - Fraunhofer Verlag ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - An Experimental and Numerical Study of Tip-Leakage Flows in an Idealized Turbine Tip Gap at High Mach Numbers T2 - Proceedings Turbo Expo 2018 Y1 - 2018 CY - Oslo, Norwegen ER - TY - CHAP A1 - aus der Wiesche, Stefan A1 - Passmann, Maximilian T1 - Analysis of Steam Turbine Blade Tip Excitation Forces by Means of Computational Fluid Dynamics and Experimental Cascade Results T2 - Proceedings Turbo Expo 2018 Y1 - 2018 CY - Oslo, Norwegen ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz A1 - Willinger, Reinhard T1 - The Physical Mechanism of Tip Leakage Loss Reduction by Means of Passive Injection in Low Mach Number Flows T2 - Proceedings Turbo Expo 2018 Y1 - 2018 CY - Oslo, Norwegen ER - TY - CHAP A1 - Hasselmann, Karsten A1 - Bin Khamalrudin, Muhammad Aiman A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Optimization of Piece-Wise Conical Nozzles: Theory and Application T2 - Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15–20 Y1 - 2018 CY - Montreal, Quebec, Canada ER - TY - CHAP A1 - Reinker, Felix A1 - Kenig, Eugeny Y. A1 - aus der Wiesche, Stefan T1 - CLOWT: A Multifunctional Test Facility for the Investigation of Organic Vapor Flows T2 - Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15–20 Y1 - 2018 CY - Montreal, Quebec, Canada ER - TY - CHAP A1 - aus der Wiesche, Stefan T1 - Heat Transfer in Rotating Flows T2 - Handbook of Thermal Science and Engineering. Ed. Francis A. Kulacki Y1 - 2018 SP - 647 EP - 690 PB - Springer CY - New York ER - TY - BOOK ED - aus der Wiesche, Stefan ED - Joos, Franz T1 - Handbuch Dampfturbinen Y1 - 2018 U6 - http://dx.doi.org/10.1007/978-3-658-20630-7 PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Algharbawi, Almutaz ballah R A1 - Hasselmann, Karsten A1 - aus der Wiesche, Stefan T1 - Thermodynamic Analysis of a Two-stage Organic Rankine Cycle with Ejector T2 - Proceedings 5th International Seminar on ORC Power Systems Y1 - 2019 CY - Athen, Griechenland ER - TY - CHAP A1 - Reinker, Felix A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Closed Loop Organic Vapor Wind Tunnel CLOWT: Commissioning and Operational Experience T2 - Proceedings 5th International Seminar on ORC Power Systems Y1 - 2019 CY - Athen, Griechenland ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Focusing schlieren visualization of transonic turbine tip-leakage flows T2 - Proceedings ETC13 Y1 - 2019 CY - Lausanne, Schweiz ER - TY - CHAP A1 - Reinker, Felix A1 - aus der Wiesche, Stefan A1 - Fritsche, Manuel A1 - Epple, Philipp A1 - Russwurm, Hans Jörg T1 - Testing, modeling and simulation of fans working with organic vapors T2 - Proceedings ETC13, 2019, Lausanne, Schweiz (Beitrag: ETC2019-326) Y1 - 2019 ER - TY - CHAP A1 - Epple, Philipp A1 - Fritsche, Manuel A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Numerical Verification of the Thermodynamic Determination of the Hydraulic Efficiency of Radial Fans T2 - Proceedings ASME 2019 International Mechanical Engineering Congress and Exposition, November 11–14, 2019, Salt Lake City, Utah, USA, IMECE2019-11417, V007T08A060; 7 pages Y1 - 2019 ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Numerical Calibration of 3D Printed Five-Hole Probes for the Transonic Flow Regime T2 - Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019, San Francisco, California, USA, AJKFluids2019-4706, V004T04A017; 11 pages Y1 - 2019 ER - TY - CHAP A1 - Fritsche, Manuel A1 - Epple, Philipp A1 - Hasselmann, Karsten A1 - Reinker, Felix A1 - Wagner, Robert A1 - aus der Wiesche, Stefan A1 - Russwurm, Hans Jörg T1 - CFD-Simulation of Centrifugal Fan Performance Characteristics Using Ideal and Real Gas Models for Air and Organic Fluids T2 - Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019, San Francisco, California, USA, AJKFluids2019-4815, V03AT03A020; 7 pages Y1 - 2019 ER - TY - CHAP A1 - aus der Wiesche, Stefan A1 - Reinker, Felix A1 - Wagner, Robert A1 - Epple, Philipp A1 - Fritsche, Manuel A1 - Russwurm, Hans Jörg T1 - An Accurate Thermal Measurement Approach for Determining Fan Efficiencies Based on System Identification T2 - Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019, San Francisco, California, USA, AJKFluids2019-4613, V03AT03A014; 10 pages Y1 - 2019 ER - TY - CHAP A1 - Hasselmann, Karsten A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Assessment of Compressible RANS and LES Methods for Organic Vapor Flows Past a NACA4412 Airfoil T2 - Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019, San Francisco, California, USA, AJKFluids2019-4843, V002T02A055; 14 pages Y1 - 2019 ER - TY - CHAP A1 - aus der Wiesche, Stefan T1 - Stagnation Flow and Heat Transfer From a Finite Disk Situated Perpendicular to a Uniform Stream T2 - Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference 2019, San Francisco, California, USA, AJKFluids2019-4610, V001T01A027; 13 pages Y1 - 2019 ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - On the Low and High Speed Flow of Gases Through Pillow Plate Channels T2 - Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019, San Francisco, California, USA, AJKFluids2019-4933, V001T01A049; 9 pages Y1 - 2019 ER - TY - JOUR A1 - Kapitz, Marek A1 - Schmiedinghoff, Lars A1 - Lüling, Sammy Joe A1 - aus der Wiesche, Stefan T1 - Impact of surface parameters on confined boiling heat transfer in a Hele-Shaw cell JF - Heat and Mass Transfer Y1 - 2019 U6 - http://dx.doi.org/10.1007/s00231-019-02604-2 VL - 55 SP - 2533 EP - 2544 ER - TY - JOUR A1 - Hasselmann, Karsten A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Optimization of Piecewise Conical Nozzles: Theory and Application JF - ASME Journal of Fluids Engineering Y1 - 2019 VL - 141 IS - 12 SP - 121202 (11 pages) ER - TY - CHAP A1 - Reinker, Felix A1 - Wagner, Robert A1 - Passmann, Maximilian A1 - Hake, Leander A1 - aus der Wiesche, Stefan T1 - Performance of a Rotatable Cylinder Pitot Probe in High Subsonic Non-ideal Gas Flows T2 - Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. Hrsg.: Matteo Pini, Carlo de Servi, Andrea Spinelli, Francesca di Mare, Alberto Guardone. ERCOFTAC Series book series (ERCO, volume 28) Y1 - 2020 SN - 978-3-030-69306-0 U6 - http://dx.doi.org/10.1007/978-3-030-69306-0 SP - 144 EP - 152 PB - Springer CY - Berlin ER - TY - CHAP A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Application of Hot-Wire Anemometry in the High Subsonic Organic Vapor Flow Regime T2 - Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. Hrsg.: Matteo Pini, Carlo de Servi, Andrea Spinelli, Francesca di Mare, Alberto Guardone. ERCOFTAC Series book series (ERCO, volume 28) Y1 - 2020 SN - 978-3-030-69306-0 U6 - http://dx.doi.org/10.1007/978-3-030-69306-0 SP - 135 EP - 143 PB - Springer CY - Berlin ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Povey, Thomas A1 - Bergmann, Detlef T1 - Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe T2 - Proceedings ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21–25, 2020, Virtual, Online, GT2020-16074, V005T05A028; 12 pages Y1 - 2020 ER - TY - CHAP A1 - aus der Wiesche, Stefan T1 - A Simplified Model for Predicting Natural Draft Wet Cooling Tower Performance of Large Steam Power Plants T2 - Proceedings ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21–25, 2020, Virtual, Online, GT2020-15369, V009T23A020, 12 pages Y1 - 2020 ER - TY - JOUR A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Focusing schlieren visualization of transonic turbine tip-leakage flows JF - Int. J. Turbomachinery Propulsion Power Y1 - 2020 U6 - http://dx.doi.org/10.3390/ijtpp5010001 VL - 5 IS - 1 ER - TY - JOUR A1 - aus der Wiesche, Stefan T1 - Stagnation Flow and Heat Transfer From a Finite Disk Situated Perpendicular to a Uniform Stream JF - ASME Journal of Fluids Engineering Y1 - 2020 VL - 142 IS - 3 SP - 031108 (15 pages) ER - TY - CHAP A1 - aus der Wiesche, Stefan A1 - Reinker, Felix A1 - Wagner, Robert A1 - Hake, Leander A1 - Passmann, Maximilian T1 - Critical and Choking Mach Numbers for Organic Vapor Flows Through Turbine Cascades T2 - Proceedings ASME Turbo Expo, virtual conference 7.-11.6.2021, Paper No. GT2021-59013 Y1 - 2021 U6 - http://dx.doi.org/10.1115/GT2021-59013 ER - TY - CHAP A1 - Cinella, Paola A1 - Matar, Camille A1 - Gloerfelt, Xavier A1 - Reinker, Felix A1 - aus der Wiesche, Stefan T1 - Subsonic organic vapor flow past a circular cylinder T2 - Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, München Y1 - 2021 ER - TY - CHAP A1 - Hake, Leander A1 - aus der Wiesche, Stefan A1 - Cinella, Paola T1 - Experimental and numerical assessment of an asymptotically correct choking Mach number correlation for organic vapor flows through turbine cascades T2 - Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, München Y1 - 2021 ER - TY - CHAP A1 - Schollmeier, Jan-Niklas A1 - aus der Wiesche, Stefan T1 - A user-friendly Pitot probe data reduction Excel-Refprop-Routine for non-ideal gas flow applications T2 - Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, München Y1 - 2021 CY - München ER - TY - CHAP A1 - aus der Wiesche, Stefan A1 - Reinker, Felix T1 - Dimensional analysis and performance laws for organic vapor flow turbomachinery T2 - Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, München Y1 - 2021 ER - TY - CHAP A1 - Hake, Leander A1 - Reinker, Felix A1 - Wagner, Robert A1 - aus der Wiesche, Stefan A1 - Schatz, Markus T1 - The Profile Loss of Additive Manufactured Blades for Organic Rankine Cycle Turbines T2 - Proceedings European Turbomachinery Conference (ETC) 14, 12.-16.04.2021, Gdansk, Polen Y1 - 2021 ER - TY - CHAP A1 - Sundermeier, Stephan A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Kenig, Eugeny Y. T1 - Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers T2 - Proceedings European Turbomachinery Conference (ETC) 14, 12.-16.04.2021, Gdansk, Polen Y1 - 2021 ER - TY - JOUR A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - Numerical Calibration of Three-Dimensional Printed Five-Hole Probes for the Transonic Flow Regime JF - ASME Journal of Fluids Engineering Y1 - 2021 VL - 143 IS - 5 SP - 051501 (12 pages) ER - TY - JOUR A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Povey, Thomas A1 - Bergmann, Detlef T1 - Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe JF - ASME Journal of Turbomachinery Y1 - 2021 VL - 143 IS - 9 SP - 091003 (9 pages) ER - TY - GEN A1 - Brockmann, Matthias A1 - Kröger, Moritz T1 - Entering the World of Internet of Production – Get Rid of the Not-Invented-Here-Syndrome and Start Making Software Components Foolproof! KW - Digitalisierung KW - Digitaler Schatten KW - Internet of Production Y1 - 2021 UR - https://podcasts.apple.com/gb/podcast/10-entering-the-world-of-internet-of-production-get/id1535764402?i=1000526020440 ER - TY - JOUR A1 - Brecher, Christian A1 - Özdemir, Denis A1 - Brockmann, Matthias T1 - Integrative Production Technology JF - Production Engineering - Research and Development N2 - Production technology is a highly interdisciplinary field of research. It comprises different production domains (cutting, welding, forming, assembly, etc.), industry-sectors, materials and scales. Moreover, production has strong interdependencies with other scientific disciplines such as product development, materials engineering, business economics, information and communication technology, social science and natural science. Integrative Production Technology aims to develop a deep technology spanning perception to offer products matching customer and societal demands at competitive prices and to quickly adapt to market and societal changes while assuring constant and predictable product properties. The Cluster of Excellence (CoE) “Integrative Production Technology for High-Wage Countries” has initiated this special issue to present some of the newest results in the field. KW - Integrative Produktion KW - Fertigung Y1 - 2017 U6 - http://dx.doi.org/10.1007/s11740-017-0730-y VL - 2017 IS - 11 SP - 93 EP - 95 ER - TY - CHAP A1 - Brecher, Christian A1 - Brockmann, Matthias A1 - Biernat, Benedikt A1 - Frenkel, Nils A1 - Neus, Stephan ED - Krupp, Ulrich ED - Münstermann, Sebastian T1 - Modellbasierte Datenanalyse als Basis für Zustandsüberwachung in Werkzeugmaschinen T2 - Steel and more : ASK 34 : Aachener Stahlkolloquium : 19. November 2020 : Online-Konferenz : Tagungsband N2 - Moderne Produktions- und Verarbeitungsanlagen in der Stahlherstellung beinhalten eine Vielzahl von Sensoriken und digitalisierten Informationen. Prinzipiell stehen daher bereits während des Betriebes große Datenmengen entlang des gesamten Herstellungsprozess zur Verfügung. Diese Daten werden teilweise direkt für interne Regelungen der Maschinen oder für Qualitätskontrollen genutzt. Ein Großteil dieser Daten bleibt jedoch ungenutzt. Dies hat zwei Hauptgründe: Zum einen müssten sehr große Datenmengen gespeichert werden, zum anderen sind die erzeugten Daten sehr heterogen und ohne Vorverarbeitung und Kenntnis der physikalischen Wirkzusammenhänge von keinem direktem Nutzen. Der Verknüpfung von relevantem Wissen, Modellen und Daten über alle relevanten technischen Domänen hinweg bietet die Möglichkeit den OEE zu optimieren. Ein domänenübergreifender Datenzugriff ermöglicht neue Möglichkeiten für produzierende Unternehmen, insbesondere müssen mit Wissen aufbereitete Daten zusammen mit bedarfsgerecht reduzierten Modellen genutzt werden. Diese modellbasierte Datenanalyse stellt die Grundlage für einen optimalen Nutzen von Daten aus der Produktion dar. KW - Industrie 4.0 KW - Data Analytics KW - Predictive Maintenance Y1 - 2020 SN - 3-96144-092-1 SP - 9 EP - 18 PB - DVS Media GmbH CY - Düsseldorf ER - TY - JOUR A1 - Brockmann, Matthias T1 - Warum digitale Transformation und Nachhaltigkeit sich gegenseitig bedingen JF - VDMA Magazin "Digitale Transformation" N2 - Nachhaltig, menschzentriert und resilient – so beschreibt die Europäische Kommission in einem ihrer Dossiers die nächste industrielle Revolution unter dem Stichwort Industrie 5.0. Vor zehn Jahren wurde auf der Hannover Messe 2011 die Vision Industrie 4.0 präsentiert. Kernelemente von Industrie 4.0 sind eine Referenzarchitektur (RAMI 4.0) zur Vernetzung zunehmend autonomer IoT-Geräte sowie Cyber-Physical Production Systems (CPPS), bei denen hochaufgelöste Simulationen („Digital Twins“) dabei helfen, physische Produktionssysteme zu überwachen, deren Verhalten vorherzusagen und zu regeln. Darüber hinaus sollen personalisierte und kontextspezifische „intelligente Agenten“ und dazugehörige Organisationsformen neue Formen der Arbeit schaffen. KW - Digitalisierung KW - Industrie 4.0 KW - Nachhaltigkeit Y1 - 2022 UR - https://www.vdma.org/viewer/-/v2article/render/45651880 SP - 18 EP - 24 ER - TY - JOUR A1 - Schuh, Günther A1 - Häfner, Constantin A1 - Hopmann, Christian A1 - Rumpe, Bernhard A1 - Brockmann, Matthias A1 - Wortmann, Andreas A1 - Maibaum, Judith A1 - Dalibor, Manuela A1 - Bibow, Pascal A1 - Sapel, Patrick A1 - Kröger, Moritz T1 - Effizientere Produktion mit Digitalen Schatten JF - Effizientere Produktion mit Digitalen Schatten N2 - Die Digitalisierung verspricht Unternehmen, die Wandlungsfähigkeit und Produktivität bestehender Fertigungssysteme zu fördern. Durch die Komplexität cyber-physischer Produktionssysteme liegen Produktionsdaten jedoch heterogen, unstrukturiert und isoliert vor. Die für eine konkrete Aufgabe oder Fragestellung benötigten Daten werden durch Digitale Schatten zielgerichtet verknüpft, abstrahiert und aggregiert, sodass eine wissensbasierte und echtzeitfähige Entscheidungsfindung in der Produktion möglich wird. KW - Industrie 4.0 KW - Digitaler Schatten KW - Ontologie Y1 - 2020 U6 - http://dx.doi.org/10.3139/104.112339 VL - 115 IS - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb SP - 105 EP - 107 ER - TY - JOUR A1 - Jarke, Matthias A1 - Schuh, Günther A1 - Brecher, Christian A1 - Brockmann, Matthias A1 - Prote, Jan-Phillip T1 - Digital Shadows in the Internet of Production JF - ERCIM News 115 Special Theme: Digital Twins N2 - Due to highly sophisticated, specialised models and data in production, digital twins, as defined as full digital representations, are neither computationally feasible nor useful. The complementary concept of digital shadows will provide cross-domain data access in real time by combining reduced engineering models and production data analytics. KW - Digital Twin KW - Industrie 4.0 KW - Production Y1 - 2018 UR - https://ercim-news.ercim.eu/en115/special/2104-digital-shadows-in-the-internet-of-production ER - TY - CHAP A1 - Brecher, Christian A1 - Brockmann, Matthias T1 - Vernetzte Produktion durch Digitale Schatten – Werkzeugmaschine 4.0 T2 - Handbuch Industrie 4.0: Recht, Technik, Gesellschaft / Hrsg. Walter Frenz N2 - Der Begriff Internet of Things hat sich weltweit als Bezeichnung für die horizontale internetbasierte Vernetzung von Cyber-Physical Systems durchgesetzt. Das IoT ermöglicht dabei die Nutzung von Felddaten (z. B. Kundenverhalten) zur Realisierung von neuartigen digitalen Geschäftsmodellen. In den meisten Anwendungsfällen sind dabei große Mengen an Felddaten vorhanden, welche durch eine relativ kleine Anzahl von Parametern beschrieben werden. Die Übertragung des IoT-Ansatzes auf die Produktion wird – insbesondere in Deutschland – mit dem Begriff Industrie 4.0 bezeichnet. Das volle Potenzial dieses Ansatzes kann derzeit jedoch nicht vollständig genutzt werden, da der Zugang zu Daten aus der Produktion aus verschiedenen Gründen nicht möglich ist und die Daten aufgrund der komplexen physikalischen Wirkzusammenhänge sehr heterogen sind. Dies führt insbesondere in der Datenanalyse zu gänzlich neuen Herausforderungen. KW - Werkzeugmaschine KW - Industrie 4.0 KW - Digitaler Schatten Y1 - 2020 U6 - http://dx.doi.org/10.1007/978-3-662-58474-3 SP - 543 EP - 552 PB - Springer-Verlag GmbH Deutschland CY - Berlin, Heidelberg ER - TY - JOUR A1 - Pennekamp, Jan A1 - Buchholz, Erik A1 - Dahlmanns, Markus A1 - Kunze, Ike A1 - Braun, Stefan A1 - Wagner, Eric A1 - Brockmann, Matthias A1 - Wehrle, Klaus A1 - Henze, Martin T1 - Collaboration is not Evil: A Systematic Look at Security Research for Industrial Use JF - Learning from Authoritative Security Experiment Results (LASER) 2020 N2 - Following the recent Internet of Things-induced trends on digitization in general, industrial applications will further evolve as well. With a focus on the domains of manufacturing and production, the Internet of Production pursues the vision of a digitized, globally interconnected, yet secure environment by establishing a distributed knowledge base. Background. As part of our collaborative research of advancing the scope of industrial applications through cybersecurity and privacy, we identified a set of common challenges and pitfalls that surface in such applied interdisciplinary collaborations. Aim. Our goal with this paper is to support researchers in the emerging field of cybersecurity in industrial settings by formalizing our experiences as reference for other research efforts, in industry and academia alike. Method. Based on our experience, we derived a process cycle of performing such interdisciplinary research, from the initial idea to the eventual dissemination and paper writing. This presented methodology strives to successfully bootstrap further research and to encourage further work in this emerging area. Results. Apart from our newly proposed process cycle, we report on our experiences and conduct a case study applying this methodology, raising awareness for challenges in cybersecurity research for industrial applications. We further detail the interplay between our process cycle and the data lifecycle in applied research data management. Finally, we augment our discussion with an industrial as well as an academic view on this research area and highlight that both areas still have to overcome significant challenges to sustainably and securely advance industrial applications. Conclusions. With our proposed process cycle for interdisciplinary research in the intersection of cybersecurity and industrial application, we provide a foundation for further research. We look forward to promising research initiatives, projects, and directions that emerge based on our methodological work. KW - Data security KW - Industrie 4.0 KW - Internet of Things Y1 - 2021 UR - https://www.comsys.rwth-aachen.de/fileadmin/papers/2021/2021-pennekamp-laser-collaboration.pdf U6 - http://dx.doi.org/10.14722/laser-acsac.2020.23088 ER - TY - CHAP A1 - Becker, Marco A1 - Brockmann, Matthias A1 - Niemietz, Philipp A1 - Trauth, Daniel A1 - Bergs, Thomas A1 - Brecher, Christian ED - Trauth, Daniel ED - Bergs, Thomas ED - Prinz, Wolfgang T1 - Das Internet of Production als Fundament der Datenverwertung in der Produktion T2 - Monetarisierung von technischen Daten / Hrsg. Daniel Trauth, Thomas Bergs, Wolfgang Prinz N2 - Das Internet of Things entfaltet erst durch die Überwindung von bestehenden Produkt- und Industriegrenzen sein volles ökonomisches Potenzial. Trotzdem werden Cyberphysische Systeme in der Forschung bisher oftmals isoliert betrachtet. Der Begriff des Internet of Production (IoP) steht für die Vision eines übergreifenden Austauschs von Daten und Informationen zwischen Produktentwicklung, Produktion und Nutzungsphase – über bestehende Organisationsgrenzen hinaus. Die Realisierung des IoP ist mit Herausforderungen im Bereich der datengetriebenen Modellierung sowie der Infrastruktur verbunden. In diesem Buchbeitrag werden die bestehenden Herausforderungen erläutert und Lösungsansätze skizziert. Der Schwerpunkt liegt auf der datengetriebenen Modellierung. Im Speziellen wird die Problematik des Lernens von kausalen Zusammenhängen, die Interpretierbarkeit von Machine-Learning-Modellen sowie die Integration von Domänenwissen in Lernalgorithmen diskutiert. Abschließend werden zwei Anwendungsbeispiele des „Digital Material Shadows“ vorgestellt. Diese veranschaulichen wie mithilfe von Machine Learning Erkenntnisse über den Materialzustand eines Werkstücks gewonnen werden können. Ziel dieser Digital Material Shadows ist es, langfristig Fertigungsprozesse adaptiv an die individuellen Materialeigenschaften des vorliegenden Werkstücks bzw. Rohmaterials anzupassen. KW - Digitalisierung KW - Industrie 4.0 KW - Digitaler Schatten KW - Geschäftsmodelle Y1 - 2021 U6 - http://dx.doi.org/10.1007/978-3-662-62915-4_15 SP - 275 EP - 295 PB - Springer Vieweg CY - Berlin, Heidelberg ER - TY - CHAP A1 - Weber, Lukas A1 - Annas, Sven A1 - Messing, Georg A1 - Elfering, Michael A1 - Jantzen, Hans-Arno A1 - Scholz, Jürgen T1 - Entwicklung von Messverfahren zur Geschwindigkeitsmessung in Biogasanlagen T2 - Biogas in der Landwirtschaft / KTBL (Hg.) Y1 - 2021 SN - 978-3-945088-83-8 SP - 206 EP - 208 ER - TY - CHAP A1 - Buntkiel, Lukas A1 - Budelmann, Christoph A1 - Heller, Andreas A1 - Annas, Sven A1 - Reinecke, Sebastian A1 - Hampel, Uwe T1 - Ein „Wireless Sensor Network“ zur Prozesscharakterisierung in Biogasfermentern T2 - Biogas in der Landwirtschaft / KTBL (Hg.) Y1 - 2021 SN - 978-3-945088-83-8 SP - 221 EP - 223 ER - TY - BOOK A1 - Göllmann, Laurenz T1 - Lineare Algebra - im algebraischen Kontext, 2. erweiterte Auflage KW - Lineare Algebra Y1 - 2020 SN - 978-3-662-61737-3 U6 - http://dx.doi.org/10.1007/978-3-662-61738-0 PB - Springer Spektrum CY - Heidelberg ER - TY - CHAP A1 - Jantzen, Hans-Arno A1 - Annas, Sven A1 - Elfring, Michael A1 - Scholz, Jürgen A1 - Heller, Andreas A1 - Janoschke, Uwe A1 - Buntkiel, Lukas ED - Nelles, Prof. Dr. Michael T1 - Rühr-und Mischvorgänge in Biogasanlagen: Potentiale und Erfolgschancen T2 - Schriftenreihe Umweltingenieurwesen Band 95 Tagungsband universität Rostock KW - Biogas KW - Optimierung KW - Rührtechnik Y1 - 2020 UR - https://bioenergieforum.auf.uni-rostock.de/files/Tagungsband.pdf SN - 978-3-86009-507-2 U6 - http://dx.doi.org/https://doi.org/10.18453/rosdok_id00002650 SP - 185 EP - 194 PB - Universität Rostock CY - Rostock ER - TY - RPRT A1 - Annas, Sven A1 - Jantzen, Hans-Arno A1 - Scholz, Jürgen A1 - Glösekötter, Peter A1 - Wetter, Christof T1 - Vorhabensbezeichnung: IngenieurNachwuchs2014: Ein neues Entwicklungswerkzeug für die Optimierung von Rührsystemen in Biogas-Fermentern unter Einsatz der Wireless Sensor Networks (WSN)-Technik in Kombination mit CFD : Schlussbericht : Berichtszeitraum: 01.11.2014 bis 31.12.2018 KW - Rührwerkoptimierung Y1 - 2019 UR - https://www.tib.eu/de/suchen/download/?tx_tibsearch_search%5Bdocid%5D=TIBKAT%3A1672326753&cHash=cc52271c2cd6579c95da17f00a67ad3c#download-mark U6 - http://dx.doi.org/10.2314/KXP:1672326753 ER - TY - BOOK A1 - Göllmann, Laurenz A1 - Christian, Henig T1 - Arbeitsbuch zur Linearen Algebra - Aufgaben, Lösungen und Vertiefungen N2 - Dieses Arbeitsbuch enthält zahlreiche Aufgaben großer thematischer Breite und unterschiedlicher Schwierigkeitsgrade – einschließlich vollständiger und ausführlicher Lösungen. Das Buch greift als optimale Ergänzung zum Lehrbuch Lineare Algebra im algebraischen Kontext mit derselben Kapitelstruktur die dort genannten Aufgaben auf. Darüber hinaus ergänzt es weitere Übungen – zur Vertiefung oder um in neue Themen einzuführen. Es ist aber auch völlig unabhängig vom Lehrbuch nutzbar. Neben Aufgaben zu linearen Gleichungssystemen, deren Lösungsverfahren und -theorie, Matrizenrechnung und Determinanten finden sich auch Übungen zur Eigenwerttheorie, Matrixdiagonalisierung und -trigonalisierung, zu Vektorräumen und Homomorphismen sowie zu Bilinearformen. Darüber hinaus wird mit Aufgaben zu Markov-Ketten und linearen Differenzialgleichungssystemen die Anwendung der linearen Algebra auf andere Bereiche der Mathematik angesprochen. Ein separates Kapitel mit Minitests dient der schnellen Überprüfung des eigenen Wissens zu besonders zentralen Themen. Viele Aufgaben lassen sich ohne weitere Hilfsmittel lösen, während andere, vor allem praxisorientierte Problemstellungen, den Einsatz mathematischer Software nahelegen. Daher wird bei diesen Aufgaben der Lösungsweg durch den Einsatz von MATLAB® ergänzt. KW - Mathematik Y1 - 2019 SN - 978-3-662-58765-2 U6 - http://dx.doi.org/10.1007/978-3-662-58766-9 PB - Springer Spektrum CY - Heidelberg ER - TY - CHAP A1 - Stalinski, David A1 - Scholz, Dieter T1 - Model-based approach of a decision processing unit in a smart wood-processing company T2 - Industry 4.0 N2 - The paper deals with the development of a new type of production planning and control in a wood-processing company. The production is already highly automated and data from the production processes are gathered and stored in a database. The project picks up these technical basements in order to automatically provide intelligent decisions and make the factory even smarter. Y1 - 2018 SN - 2534-8582 SP - 292 EP - 296 PB - Scientific technical union of mechanical engineering "industry 4.0" CY - Sofia ER - TY - JOUR A1 - Stalinski, David A1 - Scholz, Dieter T1 - Prozessbegleitende Optimierung in der Produktionssteuerung JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Die Entwicklung einer automatisierten Produktionssteuerung in der Holzveredelung soll logistische Potenziale nutzen und Wettbewerbsvorteile sowie die Standortsicherheit erhöhen. Dies erfordert die rechnergestützte Lösung von komplexen Optimierungsaufgaben in stark begrenzter Rechenzeit. Dieser Beitrag stellt einen Ansatz für die prozessbegleitende Optimierung innerhalb der Produktionssteuerung vor, wobei die Praxistauglichkeit der Optimierungsergebnisse im Vordergrund steht. Y1 - 2018 VL - 113 IS - 5 SP - 277 EP - 280 ER - TY - JOUR A1 - Annas, Sven A1 - Jantzen, Hans-Arno A1 - Janoschke, Uwe A1 - Scholz, Jürgen A1 - Elfering, Michael A1 - Volbert, Nico T1 - Einfluss der Rührwerksposition auf den Mischprozess in Biogasanlagen anhand eines Paddelrührwerks JF - CIT Chemie Ingenieur Technik Y1 - 2019 U6 - http://dx.doi.org/10.1002/cite.201800116 VL - 2019 IS - 7 SP - 1 EP - 12 ER - TY - JOUR A1 - Annas, Sven A1 - Jantzen, Hans-Arno ED - Charlfi, Walltraud T1 - Auf der Suche nach dem optimalen Rührwerk JF - e.l.b.W Umwelttechnik Wien KW - Rührwerkotimierung Y1 - 2019 VL - 2019 IS - März SP - 36 EP - 37 ER - TY - GEN A1 - Flinkert, Tobias A1 - Annas, Sven A1 - Jantzen, Hans-Arno A1 - Janoschke, U. T1 - Vorteile der Modellierung von Mischvorgängen mittels partikelbasierter Simulationsmethoden KW - partikelbasierte Simulationsmethoden Y1 - 2019 ER - TY - GEN A1 - Annas, Sven A1 - Elfering, Michael A1 - Jantzen, Hans-Arno A1 - Scholz, Jürgen A1 - Janoschke, U. T1 - Analyse zeitlich aufgelöster Stromfelder in Mischregimen mit nicht-Newtonschen Fluiden KW - nicht-Newtonsche Fluide Y1 - 2019 ER - TY - GEN A1 - Annas, S. A1 - Elfering, M. A1 - Jantzen, H.-A. A1 - Scholz, J. A1 - Janoske, U. T1 - „Analysis and improvement of the mixing process in biogas plants: Poster presented at MIXING16 conference“, Toulouse, ((09.-12.09.2018) Y1 - 2018 ER - TY - GEN A1 - Göllmann, Laurenz A1 - Maurer, Helmut T1 - Optimal Control Problems with Time Delays - Necessary Conditions, Numerical Treatment and Case Studies in Biomedicine, 14th Viennese Conference on Optimal Control and Dynamic Games, Technische Universität Wien, July 3-6, 2018 Y1 - 2018 ER - TY - JOUR A1 - Helcig, Christian A1 - aus der Wiesche, Stefan A1 - Shevchuk, Igor V. T1 - Prandtl Number Effect on the Laminar Convective Heat Transfer From a Rotating Disk JF - ASME. J. Heat Transfer Y1 - 2017 U6 - http://dx.doi.org/10.1115/1.4036729 VL - 139 IS - 10 SP - 101702 EP - 101702-10 ER - TY - JOUR A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan A1 - Joos, Franz T1 - A one-dimensional analytical calculation method for obtaining normal shock losses in supersonic real gas flows JF - Journal of Physics: Conference Series Y1 - 2017 U6 - http://dx.doi.org/10.1088/1742-6596/8 21/1/01200 4 VL - 821 IS - 1 ER - TY - CHAP A1 - Rejek, Jonas A1 - aus der Wiesche, Stefan A1 - Willinger, Reinhard T1 - Blade Tip Leakage Loss Reduction by Means of Passive Tip Injection: Linear Cascade Wind Tunnel Results T2 - Proceedings ASME Turbo Expo 2017 Y1 - 2017 SN - 978-0-7918-5078-7 U6 - http://dx.doi.org/10.1115/GT2017-63083 CY - Charlotte, NC ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan T1 - A Detailed Experimental and Numerical Investigation of Flow Structures in a Turbine Tip Gap With Passive Injection T2 - Proceedings ASME 2017 Fluids Engineering Division Summer Meeting Y1 - 2017 SN - 978-0-7918-5804-2 U6 - http://dx.doi.org/10.1115/FEDSM2017-69195 CY - Waikoloa, Hawaii ER - TY - CHAP A1 - Passmann, Maximilian A1 - aus der Wiesche, Stefan T1 - Development and Commissioning of a Supersonic Blow Down Wind Tunnel for Educational Purposes T2 - Proceedings ASME 2017 Fluids Engineering Division Summer Meeting Y1 - 2017 SN - 978-0-7918-5808-0 U6 - http://dx.doi.org/10.1115/FEDSM2017-69196 CY - Waikoloa, Hawaii ER - TY - JOUR A1 - Reinker, Felix A1 - Kenig, Eugeny Y. A1 - Passmann, Max A1 - aus der Wiesche, Stefan T1 - Closed Loop Organic Wind Tunnel (CLOWT): Design, Components and Control System. JF - Energy Procedia Y1 - 2017 VL - 129 SP - 200 EP - 207 ER - TY - BOOK A1 - Rejek, Jonas T1 - Verlustbestimmung im Abströmfeld einer Schaufelkaskade mit passiver Einblasung Y1 - 2017 SN - 978-3-658-18620-3 U6 - http://dx.doi.org/10.1007/978-3-658-18621-0 VL - XXII PB - Springer Spektrum CY - Wiesbaden ET - 1 ER - TY - JOUR A1 - Helcig, Christian A1 - aus der Wiesche, Stefan A1 - Shevchuk, Igor V. T1 - Prandtl Number Effect on the Laminar Convective Heat Transfer From a Rotating Disk JF - ASME. J. Heat Transfer Y1 - 2017 U6 - http://dx.doi.org/10.1115/1.4036729. VL - 139 IS - 10 SP - 101702 EP - 101702-10 ER - TY - GEN A1 - Göllmann, Laurenz A1 - Maurer, Helmut T1 - Direct SQP-Methods for Solving Optimal Control Problems with Delays, 15th International Symposium on Mathematical Programming, 15.-19. August 1994, University of Michigan, Ann Arbor, USA. Y1 - 1994 ER - TY - JOUR A1 - Göllmann, Laurenz A1 - Maurer, Helmut T1 - Optimal control problems with time delays: Two case studies in biomedicine JF - Mathematical Biosciences & Engineering Y1 - 2018 U6 - http://dx.doi.org/10.3934/mbe.2018051 SN - 1551-0018 VL - 15 IS - 5 SP - 1137 EP - 1154 ER - TY - GEN A1 - Göllmann, Laurenz A1 - Maurer, Helmut T1 - Optimal Control of a Continuous Stirred Chemical Tank Reactor, ECMI 94, 8th Conference of the European Consortium for Mathematics in Industry, 6.-10. September 1994, Kaiserslautern, Germany. Y1 - 1994 ER -