TY - JOUR A1 - Kleckers, Jonas A1 - Abadi, Abbas A1 - Brandherm, Katrin Marie A1 - Haberkamp, Jens T1 - Wastewater generation model to predict impacts of urine separation on wastewater treatment plants JF - Water Science & Technology 89 (5) N2 - Wastewater treatment plants (WWTPs) are under increasing pressure to enhance resource efficiency and reduce emissions into water bodies. The separation of urine within the catchment area may be an alternative to mitigate the need for costly expansions of central WWTPs. While previous investigations assumed a spatially uniform implementation of urine separation across the catchment area, the present study focuses on an adapted stochastic wastewater generation model, which allows the simulation of various wastewater streams (e.g., urine) on a household level. This enables the non-uniform separation of urine across a catchment area. The model is part of a holistic modelling framework to determine the influence of targeted urine separation in catchments on the operation and emissions of central WWTPs, which will be briefly introduced. The wastewater generation model is validated through an extensive sampling and measurement series. Results based on observed and simulated wastewater quantity and quality for a catchment area of 366 residents for two dry weather days indicate the suitability of the model for wastewater generation and transport modelling. Based on this, four scenarios for urine separation were defined. The results indicate a potential influence of spatial distribution on the peaks of total nitrogen and total phosphorus. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-179502 SN - 0273-1223 SP - 1312 EP - 1324 ER - TY - JOUR A1 - Dittmann, Daniel A1 - Seelig, Alina H. A1 - Thalmann, Mogens A1 - Wilkes, Theresa A1 - Junghans, Veikko A1 - Zahn, Daniel A1 - Klitzke, Sondra A1 - Peters, Andre A1 - Haberkamp, Jens A1 - Reemtsma, Thorsten A1 - Ruhl, Aki S. T1 - Potential and risks of water reuse in Brandenburg (Germany) – an interdisciplinary case study JF - Water Reuse 14 N2 - For Brandenburg, a region in Germany with increasing water shortage and drought events, water reuse can counteract competition scenarios between drinking water supply, agricultural irrigation, and industrial use. Centralized and decentralized sources for reclaimed water are found to potentially substitute 245 or 28% of irrigation water, respectively, in agriculture production in Brandenburg. For such a reuse scenario, the fate of organic micropollutants is examined for diatrizoate (DZA) and carbamazepine (CBZ). Retention in local sandy soil and transfer into roots and leaves of arugula are analyzed in lysimeter studies and greenhouse pot experiments. Vertical transport was found for DZA and accumulation in or on arugula roots with a root concentration factor of 1,925+34% but a low bioconcentration factor due to intrinsic molecule properties. CBZ was not found to be mobile in the sandy soil but accumulates in arugula roots and leaves by factors of 70+7% and 155+12%, respectively. Further research on potential plant uptake and groundwater enrichment for more substances is highly recommended as well as tertiary wastewater treatment prior to water reuse. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-179497 SN - 2709-6092 SP - 1 EP - 15 ER - TY - BOOK A1 - Friedrichsen, Stefanie T1 - Nachhaltiges Planen, Bauen und Wohnen N2 - Dieses Fachbuch dient als Planungswerkzeug für nachhaltiges Bauen im Wohnungsbau, sowohl bei Neubauten als auch beim Bauen im Bestand. Es werden alle relevanten Kriterien erläutert, die beim nachhaltigen Bauen zu beachten sind. Neben konkreten Maßnahmen zur Zielerreichung wird erläutert, wie die vorgestellten Kriterien bei einer Nachhaltigkeitszertifizierung mit dem Deutschen Gütesiegel für nachhaltiges Bauen (DGNB) und dem Qualitätssiegel Nachhaltiger Wohnungsbau (NaWoh) einbezogen und bewertet werden. Jedes Kapitel bietet zusammenfassende Checklisten, mit denen anstehende Bau- und Modernisierungsaufgaben systematisch angegangen werden können. KW - Nachhaltigkeit KW - Nachhaltiges Bauen KW - Ökologie Y1 - 2024 SN - 978-3-662-68204-3 U6 - http://dx.doi.org/10.1007/978-3-662-68204-3 PB - Springer Vieweg CY - Berlin, Heidelberg ET - 3., aktualisierte und erweiterte Auflage ER - TY - CHAP A1 - Strotmann, Henriette A1 - Klöpper, Dirk T1 - Arbeitsvorbereitung im Baubetrieb Tiefbau T2 - Ratgeber für den Tiefbau. Hrsg. Bernd Garstka. 10. Auflage Y1 - 2024 SN - 978-3-8462-1428-2 SP - 513 EP - 548 PB - Reguvis CY - Köln ER - TY - CHAP A1 - Strotmann, Henriette A1 - Klöpper, Dirk T1 - Arbeitsvorbereitung im Baubetrieb Hochbau T2 - Ratgeber für den Hochbau. Hrsg. Bernd Garstka. 16. Auflage Y1 - 2024 SN - 978-3-8462-1430-5 SP - 432 EP - 456 PB - Reguvis CY - Köln ER - TY - CHAP A1 - Haberkamp, Jens T1 - Anforderungen an Kläranlagen im Zusammenhang mit Wasserwiederverwendung T2 - wawi-Kurs Kommunale Abwasserbehandlung Y1 - 2023 SN - 978-3-96862-677-2 SP - 181 EP - 189 CY - Hennef ER - TY - JOUR A1 - Richter, Lea A1 - Wichern, Marc A1 - Haberkamp, Jens T1 - Prozesswasseraufbereitung – Erfahrungen aus dem Betrieb einer Membrankontaktorenanlage JF - gwf Wasser + Abwasser N2 - Die Rückführung von Prozesswasser aus der Faulschlammentwässerung kommunaler Kläranlagen führt insbesondere durch dessen hohe Ammoniumkonzentration zu einer stofflichen Rückbelastung der Abwasserbehandlung. Zur separaten Prozesswasserbehandlung wurde auf der Hauptkläranlage Münster eine großtechnische Membrankontaktorenanlage mit Vorbehandlung installiert. Es wurden Stickstoffentfernungsleistungen von durchschnittlich ca. 74 % erreicht. Betriebserfahrungen zeigen, dass neben pH-Wert, Temperatur und Volumenstrom insbesondere die Feststoffabscheidung durch die Vorbehandlung des Prozesswassers einen maßgeblichen Einfluss auf den stabilen Betrieb der Membrankontaktorenanlage hat. Mit den Membrankontaktoren konnte aus dem Prozesswasser Stickstoff als Ammoniumsulfatlösung mit einem mittleren Stickstoffanteil von ca. 2,7 % N zurückgewonnen werden. Y1 - 2023 SN - 0016-3651 VL - 2023 IS - 10 SP - 71 EP - 75 ER - TY - CHAP A1 - Kleckers, Jonas A1 - Abadi, Abbas A1 - Brandherm, Katrin A1 - Haberkamp, Jens T1 - Wastewater Generation Model to Predict Impacts of Urine Separation on Wastewater Treatment Plants T2 - 11th IWA Symposium on Modelling and Integrated Assessment (Watermatex), Quebec (Canada) N2 - Wastewater treatment plants are under increasing pressure to enhance resource efficiency and reduce emissions into water bodies. Separation of urine within the catchment area may be an alternative to mitigate the need for costly expansions of central wastewater treatment plant. While previous investigations assumed a spatially uniform implementation of urine separation across the catchment area, the present study introduces a modelling framework which allows to determine the influence of targeted urine separation on the operation and emissions of central wastewater treatment plants. The framework includes an adapted stochastic wastewater generation model, the Stormwater Management Model, and Activated Sludge Model No. 3 with Bio-P module (SIMBA#). The entire application is embedded in the R programming language. The model is validated by an extensive sampling and measurement campaign. Preliminary results based on observed and simulated wastewater generation and transport for a catchment area of 436 residents indicate the suitability of the model for wastewater generation and transport modelling, but also show further need for calibration. Y1 - 2023 ER - TY - JOUR A1 - Basler, Felix A1 - Mähner, Dietmar A1 - Fischer, Oliver A1 - Hilbig, Harald T1 - Influence of early-age vibration on concrete strength JF - Structural Concrete N2 - This report examines the strength of young and early age concrete that has been systematically exposed to horizontal, sinusoidal vibrations with varying vibration parameters. Specimens were subjected to vibrations of predefined vibration times (4–14 h) and the compressive strength was determined after a period of 28 days. It was found that the different parameters have no critical influence on compressive strength and that vibration prior to initial setting of the concrete can increase its strength. Additional information to examine the reasons for this increase was obtained by further investigations (nuclear magnetic resonance, x-ray diffraction, and thermogravimetric analysis). KW - compressive strength KW - early-age concrete KW - green concrete KW - vibrations KW - young concrete Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-172052 SN - 1464-4177 SP - 6505 EP - 6519 ER - TY - JOUR A1 - Strotmann, Henriette T1 - Strategische Überlegungen zur Förderung der zirkulkären Wertschöpfung in der Baubranche durch die standardisierte Erstellung eines digitalen Gebäuderessourcenpasses JF - Bauingenieur Y1 - 2023 SN - 0005-6650 IS - 10/2023 SP - 27 EP - 29 ER - TY - JOUR A1 - Strotmann, Henriette T1 - Sollbrustelle im Datenmanagement JF - Build-Ing. Y1 - 2023 SN - 2567-8361 VL - 03/2023 IS - 03/2023 SP - 36 EP - 37 ER - TY - CHAP A1 - Flamme, Sabine A1 - Hams, Sigrid T1 - Stand und Perspektiven der Mitverbrennung von Sekundärbrennstoffen T2 - Praxishandbuch der Kreislauf- und Rohstoffwirtschaft. Hrsg. Peter Kurth, Anno Oexle, Martin Faulstich KW - Kreislaufwirtschaft KW - Sekundärbrennstoffe KW - Mitverbrennung Y1 - 2022 SN - 978-3-658-36261-4 U6 - http://dx.doi.org/https://doi.org/10.1007/978-3-658-36262-1 SP - 761 EP - 778 PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Haberkamp, Jens A1 - Tielesch, Carlos A1 - Roß, Maximilian A1 - Eschrich, Robert A1 - Sandyk, Eduard A1 - Dittmann, Daniel A1 - Fischer, Andreas A1 - Werner, Maximilian A1 - Ruhl, Aki Sebastian T1 - Decentralized Wastewater Treatment with a Small-scale Membrane Bioreactor for Agricultural Water Reuse T2 - 13th IWA International Conference on Water Reclamation and Reuse (Chennai, India) Y1 - 2023 ER - TY - CHAP A1 - Dittmann, Daniel A1 - Seelig, Alina A1 - Thalmann, Mogens A1 - Wilkes, Theresa A1 - Junghans, Veikko A1 - Klitzke, Sondra A1 - Peters, André A1 - Haberkamp, Jens A1 - Reemtsma, Thorsten A1 - Ruhl, Aki Sebastian T1 - Agricultural Water Reuse in Brandenburg, Germany: Potentials for Point-of-use Reuse Concepts and Extensive Risk Assessment for Fate of Organic Micropollutants T2 - 13th IWA International Conference on Water Reclamation and Reuse (Chennai, India) Y1 - 2023 ER - TY - CHAP A1 - Haberkamp, Jens T1 - Entwicklungen zur Wasserwiederverwendung T2 - 56. Essener Tagung für Wasserwirtschaft: Sichere Wasserwirtschaft in Krisenzeiten. Hrsg. Thomas Wintgens Y1 - 2023 SN - 978-3-938996-62-1 SP - 26/1 EP - 26/8 ER - TY - CHAP A1 - Haberkamp, Jens T1 - Auf dem Weg zur EU-weit geregelten Wasserwiederverwendung T2 - Wassertage Münster 2023: Klimawandel - Trockenheit und Starkregen im urbanen Raum N2 - Im Zuge des Klimawandels wird der landwirtschaftliche Bewässerungsbedarf auch in Deutschland zukünftig steigen. Die EU-Verordnung 2020/741 stellt Mindestanforderungen an die Wiederverwendung weitergehend aufbereiteten kommunalen Abwassers zur landwirtschaftlichen Bewässerung, um die Nutzung natürlicher Wasserressourcen hierfür zu begrenzen. Die EU-Verordnung wird am 26. Juni 2023 Gültigkeit erlangen und soll in Deutschland in das Wasserhaushaltsgesetz eingebettet und um eine neue Bundesverordnung ergänzt werden. Zentrales Element der Wasserwiederverwendung wird der für jeden Einzelfall zu erstellende Risikomanagementplan sein, der der Minimierung möglicher hiermit verbundener Risiken dient. Als Hilfestellung für die praktische Umsetzung von Wasserwiederverwendung wird die DWA die Merkblattreihe M-1200 veröffentlichen. Y1 - 2023 UR - https://wassertage-muenster.de/cms/content/media/Tagungsband_Wassertage_Muenster_2023.pdf UR - https://doi.org/10.25974/fhms-16214 SN - 978-3-947263-34-9 SP - 66 EP - 73 ER - TY - RPRT A1 - Stretz, Celestin A1 - Nießen, Marie A1 - Walter, Gotthard A1 - Flamme, Sabine T1 - Leitfaden RessourcenPlan – Teil 3.5.2: Baukonstruktionskatalog – Steckbriefe. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 3.5.2 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157633 ER - TY - RPRT A1 - Stretz, Celestin A1 - Nießen, Marie A1 - Walter, Gotthard A1 - Flamme, Sabine T1 - Leitfaden RessourcenPlan – Teil 3.5.1: Baukonstruktionskatalog – Erläuterungen. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 3.5.1 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157621 ER - TY - RPRT A1 - Hörnschemeyer, Birgitta A1 - Lewe, Mareike A1 - Niesten, Jan A1 - Grimsehl-Schmitz, Winona T1 - Leitfaden RessourcenPlan – Teil 3.4: Stakeholder-Beratung: Blau-grüne Infrastrukturen. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 3.4 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157616 ER - TY - RPRT A1 - Hörnschemeyer, Birgitta A1 - Kleckers, Jonas A1 - Stretz, Celestin A1 - Klemm, Christian A1 - Budde, Janik A1 - Arendt, Rosalie A1 - Lewe, Mareike A1 - Albers, Flemming T1 - Leitfaden RessourcenPlan – Teil 3.3: Maßnahmen des Quartiersmanagements: Maßnahmensteckbriefe. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 3.3 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157603 ER - TY - RPRT A1 - Söfker-Rieniets, Anne A1 - Vonhoegen, Laura A1 - Klemm, Christian A1 - Budde, Janik A1 - Hörnschemeyer, Birgitta A1 - Lewe, Mareike A1 - Kleckers, Jonas A1 - Stretz, Celestin T1 - Leitfaden RessourcenPlan – Teil 3.2: Lernen von anderen – Booklet „Best-Practice“. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 3.2 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157595 ER - TY - RPRT A1 - Hörnschemeyer, Birgitta A1 - Kleckers, Jonas A1 - Stretz, Celestin A1 - Klemm, Christian A1 - Budde, Janik A1 - Söfker-Rieniets, Anne A1 - Vonhoegen, Laura A1 - Zamzow, Malte A1 - Matzinger, Andreas A1 - Maßmann, Stefanie A1 - Plogmeier, Christoph T1 - Leitfaden RessourcenPlan – Teil 3.1: Kurzanleitung RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 3.1 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157581 ER - TY - RPRT A1 - Söfker-Rieniets, Anne A1 - Vonhoegen, Laura A1 - Reicher, Christa T1 - Leitfaden RessourcenPlan – Teil 2.5: Ressourcenmanagement Fläche. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 2.5 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157575 ER - TY - RPRT A1 - Klemm, Christian A1 - Budde, Janik A1 - Becker, Gregor A1 - Arendt, Rosalie A1 - Bach, Vanessa A1 - Finkbeiner, Matthias A1 - Vennemann, Peter T1 - Leitfaden RessourcenPlan – Teil 2.4: Ressourcenmanagement Energie. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 2.4 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157560 ER - TY - RPRT A1 - Stretz, Celestin A1 - Nießen, Marie A1 - Walter, Gotthard A1 - Flamme, Sabine T1 - Leitfaden RessourcenPlan – Teil 2.3: Ressourcenmanagement Baustoffe. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 2.3 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157557 ER - TY - RPRT A1 - Kleckers, Jonas A1 - Steinkamp, Arne A1 - Arendt, Rosalie A1 - Rummler, Julia A1 - Bach, Vanessa A1 - Finkbeiner, Matthias A1 - Haberkamp, Jens T1 - Leitfaden RessourcenPlan – Teil 2.2: Ressourcenmanagement Schmutzwasser. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 2.2 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157544 ER - TY - RPRT A1 - Hörnschemeyer, Birgitta A1 - Zamzow, Malte A1 - Seis, Wolfgang A1 - Matzinger, Andreas A1 - Maßmann, Stefanie A1 - Plogmeier, Christoph A1 - Arendt, Rosalie A1 - Lewe, Mareike A1 - Teichner, Pascal A1 - Giesen, Alexander A1 - Soumagné, Sarah A1 - Bach, Vanessa A1 - Finkbeiner, Matthias A1 - Uhl, Mathias T1 - Leitfaden RessourcenPlan – Teil 2.1: Ressourcenmanagement Niederschlagswasser. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 2.1 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157531 ER - TY - RPRT A1 - Hörnschemeyer, Birgitta A1 - Söfker-Rieniets, Anne A1 - Niesten, Jan A1 - Arendt, Rosalie A1 - Kleckers, Jonas A1 - Stretz, Celestin A1 - Klemm, Christian A1 - Budde, Janik A1 - Wagner, Rüdiger A1 - Vonhoegen, Laura A1 - Reicher, Christa A1 - Grimsehl-Schmitz, Winona A1 - Wirbals, Daniel A1 - Stieglitz-Broll, Eva-Maria A1 - Agatz, Kerstin A1 - Bach, Vanessa A1 - Finkbeiner, Matthias A1 - Lewe, Mareike A1 - Henrichs, Malte A1 - Haberkamp, Jens A1 - Walter, Gotthard A1 - Flamme, Sabine A1 - Vennemann, Peter A1 - Zamzow, Malte A1 - Seis, Wolfgang A1 - Matzinger, Andreas A1 - Sonnenberg, Hauke A1 - Rouault, Pascale A1 - Maßmann, Stefanie A1 - Fuchs, Lothar A1 - Plogmeier, Christoph A1 - Steinkamp, Arne A1 - Şereflioğlu, Şenay A1 - Müller, Claus A1 - Spital, Matthias A1 - Uhl, Mathias T1 - Leitfaden RessourcenPlan – Teil 1: Konzeption RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier T3 - Leitfaden RessourcenPlan. Ergebnisse des Projekts R2Q RessourcenPlan im Quartier - 1 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-157463 PB - FH Münster CY - Münster ER - TY - BOOK A1 - Bachmann, Daniel A1 - Burrichter, Benjamin A1 - Dittmann, Daniel A1 - Freudenberg, Benjamin A1 - Gierse, Reinhard A1 - Giga, Andreas A1 - Gromadecki, Franziska A1 - Grüning, Helmut A1 - Haberkamp, Jens A1 - Halbig, Guido A1 - Heinenberg, Daniel A1 - Henrichs, Malte A1 - Hörnschmemeyer, Birgitta A1 - Johann, Georg A1 - Junghans, Veikko A1 - Kramer, Sonja A1 - Krömer, Kerstin A1 - Leischner, Florian A1 - Lepold, Charlotte A1 - Massing, Christian A1 - Mietzel, Thorsten A1 - Mudersbach, Christoph A1 - Nickel, Christina A1 - Niemann, André A1 - Pacha, Thorsten A1 - Quirmbach, Markus A1 - Roß, Maximilian A1 - Ruhl, Aki Sebastian A1 - Schulte, Andreé A1 - Siekmann, Marko A1 - Siering, Nils A1 - Stover, Maike A1 - Uhl, Mathias T1 - Klimawandel – Trockenheit und Starkregen im urbanen Raum. Tagungsband der 7. Wassertage Münster 2023. IWARU Institut für Infrastruktur · Wasser · Ressourcen · Umwelt (Hrsg.) N2 - Die klimabedingte Zunahme extremer Wetterereignisse ist eine der Herausforderungen in der gegenwärtig durch Krisen geprägten Zeit. Gefahren gehen von großräumigen Hochwasserereignissen und von kleinräumigen Überflutungen innerhalb besiedelter Bereiche aus. Ursache sind ausgeprägte Extremniederschläge. Das Schadpotenzial hängt maßgeblich von den lokalen Bedingungen ab. Ein Starkregen richtet im Flachland mit versickerungsfähigen Böden wesentlich weniger Schäden an als im Bereich eines Kerbtalgewässers, wenn dort die Hochwasserwelle auf bebaute Talbereiche trifft. Auch sind die Folgen einer als urbane Sturzflut bezeichneten Überflutung in dicht besiedelten Räumen in der Regel dramatischer als bei ländlich geprägten Siedlungsstrukturen. Aber nicht nur dem Problem „zu viel Wasser“, sondern auch der zunehmenden Herausforderung „zu wenig Wasser“ muss sich die Wasserwirtschaft stellen. Trockenheit und Hitze führen vor allem in Innenstädten immer häufiger zu Bedingungen, in denen das Leben und Arbeiten zur Belastung wird. Vielerorts sinkende Grundwasserspiegel stellen die Bewirtschaftung natürlicher Wasserressourcen und nicht zuletzt die öffentliche Wasserversorgung in Deutschland vor bislang weitgehend unbekannte Herausforderungen. Einen absoluten Schutz gegen Überflutungen und vor Hitzeperioden gibt es nicht. Wir müssen Vorsorge betreiben, um die Belastungen zu begrenzen. In der letzten Zeit hat dafür der Begriff der „Resilienz“ im wasserwirtschaftlichen Kontext eine besondere Bedeutung gewonnen. Dazu erforderliche Konzepte greifen die Wassertage Münster im Jahr 2023 auf. Zu den Maßnahmen der wasserbewussten Stadtentwicklung zählen beispielsweise die gezielte Versickerung und Verdunstung von Niederschlagswasser oder die Ableitung von Oberflächenabflüssen bei seltenen Starkregen in weniger kritische Bereiche. Thematisiert wird auch der Umgang mit (Ab-)Wasser als Ressource. Hierbei werden die Bedeutung und Chancen der Wasserwiederverwendung betrachtet. KW - Wassertage Münster 2023 KW - Klimawandel KW - Trockenheit KW - Starkregen KW - urbaner Raum Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-162147 SN - 978-3-947263-34-9 SP - 1 EP - 166 PB - FH Münster CY - Münster ER - TY - JOUR A1 - Struck, Franziska A1 - Flamme, Sabine T1 - Measuring recyclability - a key factor for resource efficiency evaluation JF - Detritus Journal N2 - The construction sector is one of the largest consumers of raw materials and energy, as well as a producer of CO2 in the European Union. To reduce environmental pollution and to preserve raw materials and energy, resource-efficient building elements must be designed. Even if laws demand resource-efficient product design in the building sector, there is no independent evaluation system for the resource efficiency of building elements (e.g., walls, roofs, floors). Such an evaluation should take the whole life cycle into account. The measurement of reusability and recyclability is therefore necessary. This article, therefore, describes the development of an evaluation system for reusability and recyclability to be included in resource efficiency assessment. Existing approaches and the special requirements of the building sector are considered. Finally, a practical example shows that the developed system is suitable for the assessment of reusability and recyclability. It can be used for the comparison of different construction methods or for the comparison of specific designs or products; thus, the evaluation system is helpful for architects as well as for product designers. KW - Recyclability KW - Measurement of recyclability KW - Circular economy KW - Reuse KW - Circularity Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-160058 UR - https://digital.detritusjournal.com/articles/in-press/measuring-recyclability--a-key-factor-for-resource-efficieny-evaluation/3512 SN - 2611-4135 SP - 1 EP - 14 PB - Cisa Publisher CY - Padova ER - TY - CHAP A1 - Haberkamp, Jens A1 - Jüstel, Thomas A1 - Pöttgen, Rainer T1 - Water, mineral acids and bases T2 - Applied Inorganic Chemistry (Volume 3) Y1 - 2023 SN - 978-3-11-073837-7 U6 - http://dx.doi.org/10.1515/9783110733471 SP - 317 EP - 329 PB - de Gruyter CY - Berlin/Boston ER - TY - JOUR A1 - Strotmann, Henriette A1 - Flamme, Sabine A1 - Bäcker, Carsten A1 - von Lützau, Erik T1 - Zentrum an der FH Münster im Aufbau - Zirkuläre Wertschöpfung im Bauwesen JF - Deutsches Ingenieurblatt Y1 - 2022 SN - 0946-2422 ER - TY - JOUR A1 - Strotmann, Henriette A1 - Flamme, Sabine A1 - Bäcker, Carsten T1 - BIM für zirkuläre Wertschöpfung JF - Build-Ing. Y1 - 2022 SN - 2567-8361 IS - 6/2022 SP - 22 EP - 23 ER - TY - JOUR A1 - Strotmann, Henriette A1 - Flamme, Sabine A1 - Bäcker, Carsten T1 - Zentrum für Zirkuläre Wertschöpfung im Bauwesen im Aufbau JF - nbau NACHHALTIG BAUEN Y1 - 2022 ER - TY - JOUR A1 - Strotmann, Henriette T1 - Die Chancen von Building Information Modeling (BIM) im Bausektor JF - der gemeinderat Y1 - 2022 IS - 09/22 SP - 10 EP - 12 ER - TY - JOUR A1 - Tophoff, Lukas A1 - Kreyenschulte, Moritz A1 - Schüttrumpf, Holger A1 - Heimbecher, Frank T1 - Verockerung wasserbaulicher Filteranlagen: Stand der Wissenschaft und notwendige Untersuchungen JF - Grundwasser - Zeitschrift der Fachsektion Hydrogeologie N2 - In den letzten Jahrzehnten kam es in Einzelfällen zu schweren Schäden an wasserbaulichen geotextilen Filteranlagen infolge der Verstopfung durch ausgeflockte ockerhaltige Produkte. Durch eine starke Verminderung der Durchlässigkeit der Geokunststoffe in Kombination mit einem hohen hydrostatischen Druck wurden unter anderem die Deckschichten verschiedener Deckwerke in den tidebeeinflussten Wasserstraßen Ems und Weser angehoben und beschädigt. Bisher wurden die Milieubedingungen, d.h. Grundwasser- und Oberflächenwasserbeschaffenheit sowie Aquifer- und Deckwerksmaterial, unter denen die Ockerbildung in geotextilen und mineralischen Filteranlagen auftritt, noch nicht systematisch untersucht. Im Rahmen des vorliegenden Beitrags werden im ersten Schritt aus theoretischen Untersuchungen und Datenanalysen von Grundwasser- und Oberflächenwasseruntersuchungen Kriterien zur Bewertung der Verockerungsneigung abgeleitet. Diese Kriterien bzw. DOCP (decisive ochre clogging parameters) zeigen in den Ästuaren Ems, Weser und Elbe Beträge an, die Verockerungserscheinungen begünstigen bzw. ermöglichen. Auf Basis dieser Untersuchungen werden im zweiten Schritt Randbedingungen für zukünftige systematische in-situ Untersuchungen an wasserbaulichen Filteranlagen sowie im experimentellen Modell abgeleitet. KW - Deckwerksschäden KW - Grundwasseruntersuchungen KW - Verockerung KW - Wasserbau KW - Mineralische und geotextile Filter Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-152930 SP - 1 EP - 14 ER - TY - BOOK A1 - Strotmann, Henriette A1 - Astour, Habeb T1 - Lehrbuch Grundlagen der BIM-Arbeitsmethode; Fragen, Übungen, Fallbeispiele KW - BIM KW - Lehrbuch Y1 - 2022 SN - 978-3-658-37239-2 PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Auel, C. A1 - Sanjou, M. A1 - Okamoto, T. A1 - Kobayashi, S. A1 - Sumi, T. T1 - Mean flow and turbulence variation due to invert abrasion T2 - Proc. 2nd Int. Workshop on Sediment Bypass Tunnels, FP15, Kyoto, Japan N2 - Due to high bedload sediment transport, many sediment bypass tunnels (SBT) are prone to severe invert abrasion. However, there is little information about the flow characteristics in SBTs after invert abrasion initiated and progresses with time. In the present study, laboratory flume experiments were performed to investigate how the hydraulic conditions change after abrasion patterns developed on the invert. A typical invert abrasion pattern was produced using 3D-printing technique and implemented in the laboratory flume. Flow depths were measured to compare the initial with the abraded state. Furthermore, turbulence measurements using 2D-laser Doppler anemometry technique were performed to obtain the mean and turbulence flow characteristics. This paper describes results of these measurements focusing on the streamwise and vertical flow velocities, turbulence intensities and Reynolds shear stress. Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151721 PB - Kyoto University ER - TY - JOUR A1 - Auel, C. A1 - Albayrak, I. A1 - Boes, R.M. T1 - Hydraulische Modellierung der Hydroabrasion JF - VAW Mitteilungen N2 - Hydroabrasion tritt im alpinen Raum hauptsächlich bei Wasserbauwerken auf, die durch hohe Fließgeschwindigkeiten und große Sedimentfrachten belastet werden. Dies sind beispielswei-se Wehrschwellen in Flüssen, Wasserfassungen von Wasserkraftwerken und vor allem Sedi-mentumleitstollen. Letztere dienen dazu sedimentreiche Hochwasserspitzen um die Talsperre herum in den Unterlauf des Flusses zu leiten. Sie verhindern so eine fortschreitende Verlan-dung des Stauraums. Es gibt verschiedene Konzepte, dem Problem der Hydroabrasion entgegen zu wirken. Einer-seits kann der Umleitstollen hydraulisch optimiert werden, um die Einwirkung auf die Sohle zu minimieren. Auf der anderen Seite kann deren Widerstand verbessert werden. An der Ver-suchsanstalt für Wasserbau, Hydrologie und Glaziologie (VAW) der ETH Zürich werden zur Zeit zwei Forschungsarbeiten durchgeführt, die sich jeweils diesen Aspekten widmen. Dieser Beitrag befasst sich mit der hydraulischen Optimierung von Sedimentumleitstollen mit Hilfe von großskaligen Laborversuchen. In insgesamt drei Versuchsreihen werden die Mittelwert- und Turbulenz-Fließcharakteristik von schießendem Abfluss in einer Versuchsrinne mittels eines Laser-Doppler Anemometrie-Systems (LDA) aufgenommen, die Fortbewegungsart des Sediments mittels eines High-Speed Kamera-Systems analysiert sowie die Abrasion der Stollensohle untersucht. In Abhängigkeit des Sohlgefälles, des Durchflusses, der Größe und Menge der Sedimentfracht erfolgt die Fortbewegung des Sedimentkorns hüpfend, rollend oder gleitend und verursacht unterschied-liche Abrasionserscheinungen in der Stollensohle. Die Ergebnisse der LDA Experimente zei-gen, dass, abhängig vom Verhältnis Gerinnebreite zur Abflusstiefe, Sekundärströmungen auf-treten. Diese Sekundärströmungen beeinflussen im untersuchten Froude-Zahlenbereich 2, 4 und 8 das longitudinale Strömungsprofil sowie die Verteilung der Sohlen- bzw. Reynolds-Schubspannungen und der Turbulenzintensität und somit letztlich die Fortbewegungsart des Sedimentkorns in der Wassersäule. Mittels der drei Versuchsreihen sollen bestmögliche hydraulische Bedingungen für Sedimen-tumleitstollen gefunden werden, um die Hydroabrasion und somit die Unterhaltskosten signi-fikant zu minimieren. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151717 PB - ETH Zurich ER - TY - BOOK A1 - Auel, C. T1 - Flow characteristics, particle motion and invert abrasion in sediment bypass tunnels T3 - PhD thesis 22008, also published as VAW Mitteilungen 229 (R. Boes ed.) N2 - Sediment bypass tunnels are an effective countermeasure against reservoir sedimenta-tion. They are operated at supercritical sediment-laden open channel flow conditions. The major drawback of these tunnels, besides high construction costs, is the severe invert abrasion caused by these flows provoking high annual maintenance costs. The project goal was to analyze the fundamental physical processes and to develop design criteria to decrease these negative effects. A laboratory study was performed in a scaled hydraulic model flume. The project was divided in three main test phases giving new insights into the dynamics of turbulence structures and particle motions, resulting bed abrasion and their interactions in a supercritical open channel flow, respectively. In phase A the mean and turbulent flow characteristics were investigated. In phase B single sediment particle motion was analyzed. In phase C the invert abrasion development in time and space was examined. Phase A revealed that secondary current cells affect the turbulent flow pattern leading to high bed shear stress at the wall vicinity. In phase B it was found, that particles were dominantly transported in saltation. Relationships between the saltation probability, and particle hop lengths and heights to the flow Shields parameter were found. The specific impact energy was determined by the impact velocity, number of impacts and the amount of particles transported in time. In phase C the results show that bed abrasion progresses with time both in the lateral and vertical direction. Two lateral incision chan-nels developed along the flume side walls at narrow flow conditions occurring at low flume-width to flow-depth aspect ratios b/h < 4-5, whereas randomly distributed pot-holes were found at wide channels where b/h > 4-5. The observed abrasion patterns match well with the spanwise bed shear stress distributions found in phase A. Further-more it was found that the abraded mass linearly increases with the transported sedi-ment mass allowing for a linear fit. Further results showed that abrasion increased with flow intensity and sediment transport rate, with highest values for the mean particle diameter category, whereas abrasion decreased with increasing material strength. Finally, a new formulation was developed based on Sklar’s saltation abrasion model. A new abrasion coefficient CA is introduced correlating the impact energy and material properties with the gravimetric abrasion rate. Y1 - 2014 U6 - http://dx.doi.org/10.3929/ethz-a-010243883 PB - ETH Zurich, Switzerland ER - TY - CHAP A1 - Auel, C. A1 - Boes, R.M. T1 - Sediment bypass tunnel design – review and outlook T2 - Proc. ICOLD Symposium - Dams under changing challenges (Schleiss & Boes, eds.), 79th Annual Meeting of ICOLD, Lucerne, Switzerland N2 - Reservoir sedimentation is increasingly affecting the majority of reservoirs all over the world. As many dams are more than 50 years of age, this problem is becoming more and more seriou403s nowadays. Reservoir sedimentation leads to various severe problems such as a decisive decrease of the active reservoir volume leading to both loss of energy production and water available for water supply and irrigation. These problems will intensify in the very next future, because sediment supply tends to increase due to climate change. Therefore coun-termeasures have to be developed. They can be divided into the three main categories sediment yield reduction, sediment routing and sediment removal. This paper focuses on sediment routing by means of sediment bypass tunnels. Sediment bypass tunnels are an effective measure to stop or at least decrease the reservoir sedimentation process. By routing the sediments around the reservoir into the tailwater in case of flood events sediment accumulation of both bed load and suspended load is reduced significantly. However, the number of sediment bypass tunnels in the world is limited primarily due to high investment and above all maintenance costs. The state-of-the-art design criteria of constructing bypass tunnels are summarized herein; major problems such as tunnel invert abrasion are discussed. The need for further research regarding sediment transport in bypass tunnels and invert abrasion is highlighted. Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151631 SN - 978-0-415-68267-1 SP - 403 EP - 412 PB - Taylor and Francis CY - London, UK ER - TY - CHAP A1 - Auel, C. T1 - Entlandung des Stausees Solis mit Hilfe eines Geschiebeumleitstollens – hydraulische Modellversuche T2 - Proc. 11. JuWi-Treffen, Communication No. 40, Laboratoire de Constructions Hydrauliques (LCH) N2 - Das Reservoir der Talsperre Solis in Graubünden wurde 1986 vom Elektrizitätswerk der Stadt Zürich (ewz) in Betrieb genommen. Bei Hochwasserereignissen werden grosse Sedimentmengen in den Stausee transportiert. Über 25 % des ursprünglichen Reservoirvolumens sind bereits verlandet. Aus diesem Grund plant ewz den Bau eines Geschiebeumleitstollens, der das bei Hochwasser ankommende Sediment um die Talsperre herum in Richtung Unterwasser leitet. Die Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie (VAW) der ETH Zürich untersucht und optimiert in einem hydraulischen Modell den projektierten Umleitstollen. Bei Hochwasser wird der Stausee auf den minimalen Betriebswasserspiegel abgesenkt, der Verlandungskörper liegt grösstenteils frei, das Sediment erodiert. Mit Hilfe einer Leitkonstruktion wird die Strömung in Richtung Einlaufbauwerk des Stollens gelenkt und der Abfluss sowie das Geschiebe durch diesen geleitet. Bei Abflüssen, die die Ausbaukapazität des Stollens (HQ5) überschreiten, wird die überschüssige Strömung in den vorderen Bereich des Sees in Richtung Grundablass abgeführt. Das Geschiebe wird dennoch nahezu vollständig in den Stollen eingeleitet. Bei Hochwasser mit Schwemmholzaufkommen wird mit Hilfe einer Tauchwand sowie einer Teilablleitung des Hochwasserabflusses in den vorderen Seebereich verhindert, dass Schwemmholz in den Umleitstollen eingezogen wird. Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151685 SP - 159 EP - 166 CY - Switzerland ER - TY - CHAP A1 - Auel, C. A1 - Berchtold, T. A1 - Boes, R.M. T1 - Sediment management in the Solis reservoir using a bypass tunnel T2 - 8th ICOLD European Club Symposium N2 - The Solis reservoir is located in the Alps in Grisons, Switzerland and is operated by the electric power company of Zurich (ewz). Since its construction in 1986, high sediment input during flood events has led to major aggradations in the reservoir. Up to date, nearly half of the original reservoir volume has been filled with sediments from upstream mountain torrents. The deltaic deposition starts extending into the active water volume. Therefore, ewz plans a sediment bypass tunnel to flush the incoming bedload around the dam to the downstream reach. In a first step the reservoir level during flood events is lowered to the minimum operation level. The delta is subjected to free surface flow and the bedload is transported over the delta and deposited further downstream. This sediment relocation decreases the delta volume within the active storage. During further flood events, the incoming sediment is led to the bypass tunnel intake using a guiding structure and flushed through the tunnel. If the flood exceeds the capacity of the bypass tunnel, the surplus flow passes the tunnel intake towards the bottom outlets with the bedload still being flushed through the tunnel. A skimming wall located upstream from the tunnel intake prevents driftwood blocking by leading it to the reservoir front where it can be safely removed. Both the sediment relocation due to water level drawdown and the flushing through the bypass tunnel are investigated and optimized in a hydraulic model at the Laboratory of Hydraulics, Hydrology and Glaciology (VAW) of ETH Zurich. Additionally, the sediment relocation process in the model is compared with a relocation test in the prototype. Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151647 SP - 438 EP - 443 CY - Innsbruck, Austria ER - TY - CHAP A1 - Auel, C. A1 - Boes, R.M. T1 - Sediment bypass tunnel design - hydraulic model tests T2 - Proc. Hydro 2011 - Practical solutions for a sustainable future N2 - Reservoir sedimentation, a serious problem affecting the majority of reservoirs worldwide, was not systematically accounted for in the past. After 50 years of operation, a constantly decreasing reservoir volume becomes currently a serious challenge for reservoir owners, against which countermeasures have to be developed. This research focuses on sediment routing using a bypass tunnel to convey sediments past a dam. By transporting sediments into the tailwater past a dam, their accumulation in the reservoir is reduced significantly. However, the global number of sediment bypass tunnels is limited primarily due to high investment and maintenance cost. The main problem of all bypass tunnels is the massive invert abrasion due to high flow velocities combined with high sediment transport rates. Therefore, VAW started two research projects to counter this problem. The main goal of the first project Layout and design of sediment bypass tunnels is to investigate the invert abrasion process by conducting hydraulic laboratory tests and to establish general design criteria for optimal flow conditions in which both sediment depositions in the tunnel are avoided and the resulting abrasion damages are kept at a minimum. The second project Optimizing hydroabrasive-resistant materials at sediment bypass tunnels and hydraulic structures investigates the hydraulic resistance of different tunnel invert materials, such as high performance concrete or cast basalt plates in prototype tests at the Solis bypass tunnel. The sediment transport measurement technique used in this project was optimized during preliminary model tests. Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151625 PB - Aqua-Media International Ltd CY - Prague, Czech Republic ER - TY - CHAP A1 - Hagemann, M. A1 - Auel, C. A1 - Albayrak, I. A1 - Boes, R.M. T1 - Hydroabrasion in Sedimentumleitstollen T2 - Proc. 35. Dresdner Wasserbaukolloquium. "Staubauwerke - Planen, Bauen, Betreiben", Wasserbauliche Mitteilungen Heft 47 N2 - Sedimentumleitstollen leiten die sedimentreichen Hochwasserspitzen um die Tal-sperre herum in den Unterlauf des Flusses und verhindern so eine fortschreitende Verlandung des Stauraums. Aufgrund der hohen Fließgeschwindigkeiten und gro-ßen Sedimentfrachten in Umleitstollen weisen diese starke Verschleißerscheinun-gen auf, die zu hohen Unterhaltskosten führen. Es gibt verschiedene Konzepte um diesem Problem entgegen zu wirken. Einerseits kann der Umleitstollen hydrau-lisch optimiert werden, um die Belastung auf die Sohle zu minimieren. Auf der anderen Seite kann der Widerstand der Stollensohle verbessert werden. An der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie (VAW) der ETH Zü-rich werden zur Zeit zwei Forschungsarbeiten durchgeführt, die sich diesen zwei Aspekten widmen. In großskaligen Laborversuchen erfolgt eine systematische Untersuchung und Optimierung der maßgebenden Parameter wie Fortbewegungs-art des Sediments und Abrasionstiefe der Stollensohle. Anhand von Prototypver-suchen im neu errichteten Sedimentumleitstollen Solis in Graubünden (Schweiz) werden die Zusammenhänge zwischen Beanspruchung, Materialeigenschaften und Abrasion im Prototyp ermittelt. Darauf basierend können Empfehlungen be-züglich Materialwahl, konstruktiver Durchbildung und Dimensionierung abgege-ben und so zu einer nachhaltigen und wirtschaftlichen Wasserbewirtschaftung in Stauseen beigetragen werden. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151612 SP - 95 EP - 104 ER - TY - CHAP A1 - Auel, C. A1 - Boes, R.M. T1 - Sustainable reservoir management using sediment bypass tunnels T2 - Proc. 24th ICOLD Congress, Q92 R16, Kyoto, Japan N2 - Reservoir sedimentation is an increasing problem affecting the majority of reservoirs both in Switzerland and worldwide. As many dams are more than 50 years of age, this problem is becoming more and more serious nowadays. Res-ervoir sedimentation leads to various severe problems such as a decisive de-crease of the active reservoir volume leading to both loss of energy production and water available for water supply and irrigation. These problems will intensify in the near future, because sediment supply tends to increase due to climate change. Therefore, countermeasures have to be developed. They can be divided into the three main categories sediment yield reduction, sediment routing and sediment removal. This paper focuses on the sediment routing using sediment bypass tunnels. Sediment bypass tunnels are an effective means to decrease the reservoir sedimentation process. By routing the sediments around the reservoir into the tailwater, sediment accumulation is reduced significantly. However, the number of sediment bypass tunnels in the world is limited primarily due to high investment and maintenance costs. The main problem of all bypass tunnels is the invert abrasion due to high velocities in combination with high sediment transport. Three Swiss bypass tunnel examples suffering invert abrasion are presented in this paper. Furthermore, VAW started a research project to investigate the invert abrasion process by conducting hydraulic scale tests in the laboratory. The goal of this research project is to establish general design criteria for optimal flow con-ditions where both sediment depositions in the tunnel are avoided and the result-ing abrasion damages are kept at a minimum. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151605 SP - 224 EP - 241 PB - ICOLD ER - TY - CHAP A1 - Albayrak, I. A1 - Auel, C. A1 - Boes, R.M. T1 - Supercritical flow in sediment bypass tunnels T2 - Proc. 12th Int. Symp. on River Sedimentation. Advances in River Sediment Research N2 - This paper deals with an experimental investigation of the mean and turbulence characteristics of supercritical quasi-uniform and gradually varied open-channel flows over a transitional rough bed. These conditions are typical for sediment bypass tunnels. The results show that the log-law holds well in the inner region across the channel. The roughness shifts the velocity profiles downward by an amount of ΔU+. The velocity-dip phenomenon and strong secondary currents exist in the channel for narrow open-channel flow. These currents cause the Reynolds shear stress distributions to deviate from the linear distribution and an undulation on the transversal distribution of the bed shear stress, which matches with the bed abrasion pattern. The streamwise turbulence intensity profiles deviate from the semi-empirical universal function whereas the vertical turbulence intensity profiles fit well with it only at the centerline of the channel. A strong wall effect exists on the turbulence intensities in the outer region. Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151597 SN - 978-1-138-00062-9 SP - 1867 EP - 1875 PB - Taylor and Francis CY - London, UK ER - TY - CHAP A1 - Auel, C. A1 - Albayrak, I. A1 - Boes, R.M. T1 - Laborversuche über die Partikelbewegung in schiessendem Abfluss (Laboratory experiments on particle motion in supercritical flows) T2 - Proc. Int. Symposium “Wasser- und Flussbau im Alpenraum”, VAW Mitteilungen Y1 - 2014 SP - 147 EP - 156 PB - ETH Zurich ER - TY - CHAP A1 - Auel, C. A1 - Albayrak, I. A1 - Boes, R.M. T1 - Bedload particle velocity in supercritical open channel flows T2 - Proc. 7th River Flow, Int. Conference on Fluvial Hydraulics (Schleiss et al. eds.) N2 - Single glass sphere motion recordings were conducted in a transitional-rough bed open channel at steady and highly supercritical flow similar to hydraulic conditions in sediment bypass tunnels. A high speed camera with a maximum resolution of 2,560 × 2,160 pixels was used to record the movement of bedload particles with diameters of D = 5.3, 10.3 and 17.5 mm. An in-house developed Particle Tracking Velocimetry (PTV) program was used to determine the transport mode and velocities of each particle for a wide range of Froude numbers up to Fo = 6. The relative roughness defined as the ratio of the bed roughness height ks to the water depth h varied from ks/h = 0.02–0.03. Particles were observed to move in rolling and saltation modes depending on the Shields number. The particle velocity shows a linearly increasing relationship with both friction velocity and Froude number nearly independent on the particle diameter. A linear relationship was also found between rolling and saltating particle velocities indicating that particle velocity does not depend on the transport mode in the range of the investigated hydraulic conditions. Scaling of particle velocity with the wave celerity plotted as a function of the Froude number adequately merged external data sets with the present data. As a consequence, a linear fit for a large Froude number range was obtained. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151579 SN - 978-1-138-02674-2 SP - 923 EP - 931 PB - Taylor and Francis ER - TY - CHAP A1 - Boes, R.M. A1 - Auel, C. A1 - Hagemann, M. A1 - Albayrak, I. T1 - Sediment bypass tunnels to mitigate reservoir sedimentation and restore sediment continuity T2 - Reservoir Sedimentation N2 - Worldwide, a large number of reservoirs impounded by dams are rapidly filling up with sediments. As on a global level the loss of reservoir volume due to sedimentation increases faster than the creation of new storage volume, the sustainability of reservoirs may be questioned if no countermeasures are taken. This paper gives an overview of the amount and the processes of reservoir sedimentation and its impact on dams and reservoirs. Furthermore, sediment bypass tunnels as a countermeasure for small to medium sized reservoirs are discussed with their pros and cons. The issue of hydroabrasion is highlighted, and the main design features to be applied for sediment bypass tunnels are given. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151569 SN - 978-1-138-02675-9 SP - 221 EP - 228 PB - Taylor and Francis Group CY - London, UK ER - TY - CHAP A1 - Auel, C. A1 - Albayrak, I. A1 - Boes, R.M. T1 - Bed-load particle motion in supercritical open channel flows T2 - Proc. 36th IAHR World Congress, Delft - The Hague, the Netherlands N2 - Supercritical sediment-laden open channel flows occur in many hydraulic structures including dam outlets, weirs, and bypass tunnels. Due to high flow velocities and sediment flux severe problems such as erosion and abrasion damages are expected in these structures (Jacobs et al., 2001). Sediment bypass tunnels (SBT), as an effective measure to decrease reservoir sedimentation by bypassing sediments during floods, are exceptionally prone to high abrasion causing significant annual maintenance cost (Sumi et al., 2004; Auel and Boes, 2011). The Laboratory of Hydraulics, Hydrology and Glaciology (VAW) of ETH Zurich conducted a laboratory study to counteract these negative effects (Auel, 2014). The main goals of the project were to analyze the fundamental physical processes in supercritical flows as present in SBTs by investigating the mean and turbulence flow characteristics (Auel et al., 2014a), particle motion (Auel et al., 2014b; 2015b), and abrasion development caused by transported sediment. Besides new insights into the three listed topics, paramount interest is given to their inter-relations and the development of an easily applicable abrasion prediction model (Auel et al., 2015a). This paper presents selected results on the second topic, i.e. the analysis of saltation trajectories of single coarse particles in supercritical flow. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151559 PB - IAHR ER - TY - CHAP A1 - Auel, C. A1 - Boes, R.M. A1 - Sumi, T. T1 - Abrasion damage estimation of sediment bypass tunnels: Validation and comparison of two prediction models T2 - Annuals of Disaster Prevention Research Institute 58B, Kyoto University, Japan N2 - Abrasion damage estimation of sediment bypass tunnels: Validation and comparison of two prediction models. Annuals of Disaster Prevention Research Institute 58B, Kyoto Univer-sity, Japan Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151547 UR - http://hdl.handle.net/2433/210040 SP - 540 EP - 549 PB - Kyoto University ER - TY - CHAP A1 - Oertli, C. A1 - Auel, C. T1 - Solis sediment bypass tunnel: First operation experiences T2 - Proc. 1st Int. Workshop on Sediment Bypass Tunnels, VAW Mitteilungen N2 - The Solis dam was built in 1986 by the Electric Power Company of Zurich (ewz). Ever since the construction, large amounts of sediments accumulated in the reservoir and led to severe sediment aggradation. As a consequence, the storage volume was reduced by about 50% till 2012 causing loss of energy production. Additionally, in the near future sediments may have caused severe damage at the dam due to blockage of the bottom outlets. Therefore, in 2011 and 2012 a sediment bypass tunnel was realized in order to redirect the incoming sediments into the tailwater to inhibit sediment aggradation. Since its inauguration, the tunnel was operated four times including a 100-year flood event in August 2014. First operational experiences are described herein. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151539 SP - 223 EP - 233 PB - ETH Zurich ER - TY - CHAP A1 - Auel, C. A1 - Albayrak, I. A1 - Sumi, T. A1 - Boes, R.M. T1 - Saltation-abrasion model for hydraulic structures T2 - Proc. 1st Int. Workshop on Sediment Bypass Tunnels, VAW Mitteilungen 232 N2 - The derivation of an abrasion prediction model for concrete hydraulic structures valid in supercritical flows is presented herein. The state of the art saltation-abrasion model from Sklar and Dietrich (2004) is modified using the findings of a recent research pro-ject on the design and layout of sediment bypass tunnels. The model correlates the im-pacting parameters with the invert material properties by an abrasion coefficient kv. The value of this coefficient is verified by a similarity analysis to bedrock abrasion in river systems applying a correlation between the abrasion rate and the bed material strength. A sensitivity analysis reveals that the saltation-abrasion model is highly dependent on an adequate estimation of kv. However, as a first order estimate the proposed model en-ables the practical engineer to estimate abrasion at hydraulic structures prone to super-critical flows. N2 - In diesem Beitrag wird ein Abrasionsvorhersagemodell für wasserbauliche Anlagen vorgestellt, die hohen Fliessgeschwindigkeiten ausgesetzt sind. Das Modell beruht auf dem Ansatz von Sklar und Dietrich (2004) und beinhaltet neue Erkenntnisse über die Partikeltrajektorien und Aufprallgeschwindigkeiten in schiessendem Abfluss. Das Mo-dell verbindet die Einwirkungs- mit den Materialwiderstandsparametern der Sohle mit Hilfe des Abrasionskoeffizienten kv. Der Wert dieses Koeffizienten wurde anhand einer Ähnlichkeitsanalyse zur Flusssohlenabrasion durch eine Korrelation der Abrasionsrate mit der Sohlmaterialfestigkeit verifiziert. Eine Sensitivitätsanalyse zeigt den grossen Einfluss dieses Parameters auf die Abrasion auf. Dennoch ist das vorgeschlagene Mo-dell als praktische Hilfe für den Ingenieur in der Praxis geeignet, um die Abrasion an wasserbaulichen Anlagen abzuschätzen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151528 SP - 101 EP - 121 PB - ETH Zurich ER - TY - CHAP A1 - Auel, C. A1 - Hagemann, M. A1 - Albayrak, I. A1 - Boes, R.M. T1 - Optimizing the sustainability of sediment bypass tunnels to counter reservoir sedimentation T2 - Proc. 25th ICOLD Congress, Q99 R31, Stavanger, Norway N2 - In order to prevent reservoir sedimentation, sediment bypass tunnels can be an efficient countermeasure restoring sediment continuity of impounded rivers. Although supercritical open channel flow conditions in these tunnelsprevent tun-nel blockage, in combination with the high bypassed sediment volume it may lead tosevere abrasion damages on inverts. Consequently,wear termed hydroabra-sionoccurs. Based on laboratoryexperiments, a theoretical model was devel-oped to predict abrasion rates and service life timeof sediment bypass tunnels. Insituexperiments are further conducted for model calibration to provide an abrasion prediction approach for field applications.Finally,recommendations concerning the hydraulic design of the tunnel as well as the structural design ofthe invertareprovided. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151518 SP - 431 EP - 452 PB - ICOLD ER - TY - CHAP A1 - Koshiba, T. A1 - Sumi, T. A1 - Tsutsumi, D. A1 - Kantoush, S.A. A1 - Auel, C. T1 - Development of a bedload transport meas-uring system in sediment bypass tunnels T2 - 84th Annual Meeting of ICOLD, Johannesburg, South Africa 4-49−4-58 N2 - Sediment Bypass Tunnels are operated to divert sediment around reservoirs reducing reservoir sedimentation. A major drawback of these tunnels is severe invert abrasion due to high velocity and sediment flows. There is an urgent need to establish innovative measurement systems of sediment transport rates in SBTs. In this paper, three bedload measuring systems, namely hydrophones, geophones, and newly developed plate microphones are introduced and compared. The Koshibu SBT is planned to operate from 2016. Plate microphones combined with geophones and other planned systems are installed in the tunnel. Results of preliminary tests and installation plans of bedload measurement are presented. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151506 SN - 978-0-620-71042-8 PB - ICOLD ER - TY - CHAP A1 - Auel, C. A1 - Kantoush, S.A. A1 - Sumi, T. T1 - Positive effects of reservoir sedimentation management on reservoir life: Examples from Japan T2 - 84th Annual Meeting of ICOLD, Johannesburg, South Africa 4-11−4-20. N2 - The effectiveness of different strategies against reservoir sedimentation is demonstrated herein using data sets of Asahi, Nunobiki and Dashidaira reservoirs in Japan. The applied strategies encompass sediment routing with a bypass tunnel, drawdown flushing during floods and sabo dam construction in the catchment. It is shown that bypassing and flushing are very efficient strategies enlarging reservoir life by 3 to 21 times up to many hundreds of years. Furthermore, it is revealed that also efforts in the catchment, e.g. sabo dam construction, is effective enlarging reservoir life by 2.4 times. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151498 SN - 978-0-620-71042-8 PB - ICOLD ER - TY - CHAP A1 - Kobayashi, S. A1 - Auel, C. A1 - Sumi, T. A1 - Takemon, Y. T1 - Effects of sediment supply by bypass tunnels on bed to-pography, grain size, and invertebrate habitat T2 - Proc. 20th IAHR APD Congress, Colombo, Sri Lanka, 5B008 N2 - To understand the effects of sediment bypass on environmental recovery of the degraded channels below dams, bed topography and bed materials above and below dam reaches were surveyed by ground-based measurements and aerial photos using quadrocopter. Coarse bed materials such as boulders were more represented below than above the Koshibu dam, where the bypass tunnel had not been in operation yet. The coarse materials formed steps and protruded in the water column within riffles and runs, both of which can increase slow-flow areas, below the dam. On the other hand, sand, gravel, and cobbles were abundant below as much as above the Asahi dam, where the bypass tunnel had been operated for >17 years. The downstream environment in terms of bed topography and grain size seems to have almost been recovered for the Asahi dam. However, less representation of large cobbles and boulders below the dam suggested a possibility of a selective deposition of coarse materials at the upstream of the bypass tunnel inlet. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151473 PB - IAHR ER - TY - CHAP A1 - Koshiba, T. A1 - Auel, C. A1 - Tsutsumi, D. A1 - Kantoush, S.A. A1 - Sumi, T. T1 - Improvement of a bedload transport rate measuring systems in sediment bypass tunnels T2 - River Sedimentation: Proc. 13th Int. Symposium on River Sedimentation N2 - For long term use of dams, it is required to develop methods of sediment management in reservoirs. As one method, Sediment BypassTunnels (SBT) are operated in Japan and Switzerland to prevent reservoir sedimentation. SBT reduces sedimentation in reservoirs by routing the incoming sediments around the dam. SBT, however, is prone to severe invert abrasion caused by high sediment flux. Therefore, it is necessary to establish a measurement system of sediment transport rates in the SBT. A geophone was experimentally investigated in a laboratory flume at ETH Zurich. The sediment transport rate is calculated based on the plate vibration caused by hitting of gravels. In this paper, in order to alleviate disadvantages of a geophone, two newly developed sensor systems, a plate microphone and plate vibration sensor, are suggested and the results of their calibration experiments are shown. Finally, they are compared with the existing methods. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151462 SN - 978-1-138-02945-3 SP - 1038 EP - 1045 PB - CRC Press CY - Stuttgart, Germany ER - TY - CHAP A1 - Auel, C. A1 - Kobayashi, S. A1 - Sumi, T. A1 - Takemon, Y. T1 - Effects of sediment bypass tunnels on sediment grain size distribution and benthic habitats T2 - River Sedimentation: Proc. 13th Int. Symposium on River Sedimentation Y1 - 2016 SP - 825 EP - 832 PB - CRC Press CY - Stuttgart, Germany ER - TY - CHAP A1 - Kobayashi, S. A1 - Auel, C. A1 - Sumi, T. A1 - Takemon, Y. T1 - Recovery of riverbed features and invertebrate community in degraded channels by sediment supply through bypass tunnel T2 - Proc. 12th Int. Conference on Hydroscience and Engineering, Tainan, Taiwan N2 - Sediment, which deposits and damages the function of reservoirs, is an essential element of aquatic habitats in downstream ecosystems. We reviewed ecosystem features of degraded channels associated with sediment deficiency below dams and ecosystem responses to changes in sediment conditions after management practices in Japan. Sediment bypass tunnel (SBT) is an effective way to transport sufficient amount of sediment to downstream ecosystems. Based on a concept of suitable mass and size of sediment for ecosystem, some effects and limitations of SBT on downstream ecosystems were discussed. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151447 PB - ICHE ER - TY - CHAP A1 - Müller-Hagemann, M. A1 - Auel, C. A1 - Albaryak, I. A1 - Boes, R.M. T1 - Bedload transport and hydro-abrasive erosion at steep bedrock rivers and hydraulic structures T2 - Riverflow, Lyon, France Y1 - 2018 ER - TY - JOUR A1 - Auel, C. A1 - Berchthold, T. A1 - Boes, R. T1 - Entlandung des Stausees Solis mittels Geschiebeumleitstollen JF - Wasserwirtschaft Y1 - 2010 SP - 117 EP - 119 ER - TY - JOUR A1 - Auel, C. A1 - Boes, R. A1 - Ziegler, T. A1 - Oertli, C. T1 - Design and construction of the sediment bypass tunnel at Solis JF - Int. Journal on Hydropower and Dams Y1 - 2011 SP - 62 EP - 66 ER - TY - JOUR A1 - Auel, C. A1 - Albayrak, I. A1 - Boes, R.M. T1 - Turbulence characteristics in supercritical open channel flows: Effects of Froude number and aspect ratio JF - Journal of Hydraulic Engineering ASCE N2 - An experimental investigation of supercritical uniform and gradually varied open channel flows is presented for a wide range of Froude numbers and flume width-to-flow depth aspect ratios. The instantaneous streamwise and vertical flow velocities were measured in a laboratory flume over the entire width using a two dimensional–laser Doppler anemometry (2D-LDA) system to determine turbulence intensities, and bed and Reynolds shear stresses. The mean velocity patterns show undulation across the flume, indicating the presence of counterrotating secondary current cells. These currents redistribute turbulence intensities and bed and Reynolds shear stresses across the flume. For aspect ratios ≤ 4−5, i.e., narrow open channel flow, the velocity-dip phenomenon is identified both in the streamwise velocity and the Reynolds shear stress distributions. For high aspect ratios, i.e., wide open channel flow, the strength of secondary currents diminish toward the flume center, resulting in a 2D flow farther away from the walls and no velocity-dip phenomenon. Froude number effects on the flow characteristics are less pronounced compared to the aspect ratio effects. At high Froude numbers, the results for narrow and wide open channel flows agree well with literature data. The log-law holds in the inner region across the entire flume width for all investigated Froude numbers and aspect ratios. The Reynolds shear stress distribution agrees well with the computed spanwise bed shear stress distribution. At the flume side walls, the bed shear stresses are 20–50 % higher than the mean values. These results are verified with an engineering example in which high sediment transport and corresponding deep abrasion patterns at the side walls were observed. Y1 - 2014 U6 - http://dx.doi.org/10.1061/(ASCE)HY.1943-7900.0000841 ER - TY - JOUR A1 - Hagemann, M. A1 - Albayrak, I. A1 - Boes, R.M. A1 - Auel, C. A1 - Sumi, T. T1 - Reviewing research and experience on sediment bypass tunnels JF - Int. Journal on Hydropower and Dams Y1 - 2016 SP - 54 EP - 58 ER - TY - JOUR A1 - Auel, C. A1 - Boes, R. T1 - Sedimentumleitstollen – eine nachhaltige Maßnahme gegen Stauraumverlandung JF - Wasserwirtschaft Y1 - 2017 IS - 4 SP - 42 EP - 47 ER - TY - JOUR A1 - Auel, C. A1 - Albayrak, I. A1 - Sumi, T. A1 - Boes, R.M. T1 - Sediment transport in high-speed flows over a fixed bed. 1: Particle dynamics JF - Earth Surface Processes and Landforms N2 - Particle dynamics are investigated experimentally in supercritical high-speed open channel flow over a fixed planar bed of low relative roughness height simulating flows in high-gradient non-alluvial mountain streams and hydraulic structures. Non-dimensional equations were developed for transport mode, particle velocity, hop length and hop height accounting for a wide range of literature data encompassing sub- and supercritical flow conditions as well as planar and alluvial bed configurations. Particles were dominantly transported in saltation and particle trajectories on planar beds were rather flat and long compared with alluvial bed data due to (1) increased lift forces by spinning motion, (2) strongly downward directed secondary currents, and (3) a planar flume bed where variation in particle reflection and damping effects were minor. The analysis of particle saltation trajectories revealed that the rising and falling limbs were almost symmetrical contradicting alluvial bed data. Furthermore, no or negligible effect of particle size and shape on particle dynamics were found. Implications of experimental findings for mechanistic saltation-abrasion models are briefly discussed. Y1 - 2017 U6 - http://dx.doi.org/10.1002/esp.4128 SP - 1384 EP - 1396 ER - TY - JOUR A1 - Auel, C. A1 - Albayrak, I. A1 - Sumi, T. A1 - Boes, R.M. T1 - Sediment transport in high-speed flows over a fixed bed. 2: Particle impacts and abrasion prediction JF - Earth Surface Processes and Landforms N2 - Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high-gradient non-alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient kv was found to be vary around kv ~ 105 for hard materials (tensile strength ft > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Y1 - 2017 U6 - http://dx.doi.org/10.1002/esp.4132 SP - 1365 EP - 1383 ER - TY - JOUR A1 - Auel, C. A1 - Kobayashi, S. A1 - Takemon, Y. A1 - Sumi, T. T1 - Effects of sediment bypass tunnels on grain size distribu-tion and benthic habitats in regulated rivers JF - International Journal of River Basin Management N2 - Four dams in Japan and Switzerland with Sediment Bypass Tunnels (SBT) as a measure against reservoir sedimentation were monitored to analyse the effects of sediment supply on the downstream environment based on up- to downstream differences in geomorphological and biological characteristics. SBT operation times ranged from 93 years at Pfaffensprung and 17 at Asahi to only three years at Solis and no operation at Koshibu. Sediment grain size distribution was monitored, and microhabitats and invertebrates were analysed in terms of richness and composition. Results showed that grain sizes were coarser down- than upstream at dams with newly established SBTs, while they were similar or finer for dams with long SBT operation. Analysis of biotic data revealed that microhabitat and invertebrate richness was low directly below the dam but increased further downstream the longer the SBT operation. Sedentary species dominated at locations where bed conditions were stable, e.g. directly downstream of the dam at Koshibu. Recovery of downstream environment with increasing SBT operation time was disclosed by the Bray–Curtis similarity index, which evaluated an overlap between up- and downstream reaches for both microhabitat composition and invertebrate communities. With increasing operation time, both indices increased, revealing the positive effects of long-term SBT operation. Y1 - 2017 U6 - http://dx.doi.org/10.1080/15715124.2017.1360320 SP - 433 EP - 444 ER - TY - JOUR A1 - Auel, C. A1 - Boes, R.M. A1 - Sumi, T. T1 - Abrasion prediction at Asahi sediment bypass tunnel based on Ishibashi’s formula JF - Journal of Applied Water Engineering and Research N2 - Abrasion in a concrete-lined sediment bypass tunnel is estimated using a Japanese state-of-the-art prediction model and validated by measured invert abrasion data at Asahi Reservoir, Japan. The model is described in detail, certain shortcomings are disclosed, and a revised version is proposed. The model consists of a kinetic energy term accounting for the impact by saltating particles, and a friction work term accounting for the grinding stress. It is found that the latter term yields concrete abrasion values being consistently a multiple compared to its kinetic term contradicting other research. Based on that, and a possible particle impact angle inconsistency, it is proposed to omit the friction work term. It is shown that the calculated abrasion is overestimated by 138% on average compared with that measured, if both terms are accounted for. However, promising results are obtained with only 30% overestimation by neglecting the friction work term. Y1 - 2018 U6 - http://dx.doi.org/10.1080/23249676.2016.1265470 SP - 125 EP - 138 ER - TY - JOUR A1 - Koshiba, T. A1 - Auel, C. A1 - Tsutsumi, D. A1 - Kantoush, S.A. A1 - Sumi, T. T1 - Application of an impact plate - bedload transport measuring system for high-speed flows JF - International Journal of Sediment Research N2 - To achieve the sustainable use of dams, the development of methods for sediment management in reservoirs is required. One such method includes the use of Sediment Bypass Tunnels (SBTs) to divert sediment around a dam, thereby preventing sedimentation in the reservoir. However, SBTs are prone to severe invert abrasion caused by the high sediment flux. Therefore, it is necessary to establish a measurement system of the sediment transport rate in these tunnels. One system to measure sediment transport in rivers is the Swiss plate geophone, which can register plate vibrations caused by particle impact. In Japan, the Japanese pipe microphone is used, and sediment transport is measured based on the sound emitted by the particle impact. In this study an attempt was made to optimize the advantages of both systems by fixing a microphone and an acceleration sensor to a steel plate. The results of calibration experiments with this new system are presented and compared with the existing methods. It was found that the acceleration sensor can detect sediment particles larger than 2 mm in diameter. Moreover, a new parameter, referred to as the detection rate, was introduced to describe the correlation between the actual amount of sediment and the registered output. Finally, two parameters - the saturation rate and hit rate - are introduced and exhibit strong correlation with the detection rate. Y1 - 2018 U6 - http://dx.doi.org/10.1016/j.ijsrc.2017.12.003 SP - 35 EP - 46 ER - TY - CHAP A1 - Auel, C. A1 - Sumi, T. T1 - Abrasion damage in sediment bypass tunnels T2 - River Sedimentation: Proc. 12th Int. Conference on Hydroscience and Engineering, Tainan, Taiwan, 02-0020 N2 - Sediment bypass tunnels are an effective and sustainable strategy against reservoir sedimentation. Sediments are diverted into the down-stream during floods without deposition in the reservoir, hence mor-phological and ecological variability increases. One major drawback of these tunnels is the severe invert abrasion due to a combination of high flow velocities and bedload sediment transport. The abrasion phenom-ena is briefly described, different abrasion prediction models are pre-sented and their applicability for the estimation of concrete abrasion is discussed. Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151436 PB - ICHE ER - TY - CHAP A1 - Auel, C. A1 - Thene, J.R. A1 - Müller-Hagemann, M. A1 - Albaryak, I. A1 - Boes, R.M. T1 - Abrasion prediction at Mud Mountain sediment bypass tunnel T2 - Proc. 2nd Int. Workshop on Sediment Bypass Tunnels, FP12, Kyoto, Japan N2 - A major drawback of sediment bypass tunnels is the potential for severe invert abrasion due to intense bedload sediment transport. This paper briefly describes the abrasion phenomena as well as the available models used to predict invert material loss. The application and calibration is demonstrated on the basis of the Mud Mountain sediment bypass tunnel, Washington, USA. Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151422 PB - ETH Zurich ER - TY - CHAP A1 - Auel, C. A1 - Thene, J.R. A1 - Carroll, J. A1 - Holmes, C. A1 - Boes, R.M. T1 - Rehabilitation of the Mud Mountain bypass tunnel invert T2 - VINGT SIXIÈME CONGRÈS DES GRANDS BARRAGES Vienne, Juillet 2018 N2 - This paper describes the design of the new tunnel invert lining of the 9-foot tunnel at Mud Mountain Dam, Washington, USA. The tunnel diverts all bed load sediments into the tailwater. Major invert abrasion has been observed in the existing steel lining. The new invert design consists of 0.59 m2 and 0.79 m2 granite blocks that are 0.25 m thick and placed tightly together along the tunnel. Stability analysis showed factors of safety ranging from 1.2 to 2.6 against uplift. This will be achieved with strip drains placed in the bedding material along the tunnel. A service-design-life analysis was performed using abrasion prediction modelling. This model was based on abrasion measurement data acquired from granite field tests at Pfaffensprung sediment bypass tunnel, Switzerland. The estimated annual abrasion depths for the granite were approximately 0.50 mm/year for average sediment transport conditions. Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151413 PB - COMMISSION INTERNATIONALE DES GRANDES BARRAGES ER - TY - CHAP A1 - Auel, C. T1 - Sediment bypassing, a sustainable and co-friendly strategy against reservoir sedimentation T2 - VINGT SIXIÈME CONGRÈS DES GRANDS BARRAGES Vienne, Juillet 2018 N2 - Without adequate measures, reservoirs are not sustainable, neither the reservoir itself due to continuous sedimentation, nor the downstream ecosystem due to altered sediment continuity. Appropriate actions are inevitable and require a systematic sedimentation management. Sediment bypassing constitutes one effective strategy that routes sediment load around reservoirs during floods. A sediment bypass system has the advantage that only newly entrained sediment is diverted from the upstream to the downstream reach thereby re-establishing sediment connectivity. Hence, such a system contributes to a sustainable water resources management while taking the downstream environment into consideration. This paper gives a state-of-the-art overview encompassing design, bypass efficiency, hydraulics, challenges due to abrasion, positive effects on both downstream morphology and ecology, and makes design recommendations. Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151407 PB - COMMISSION INTERNATIONALE DES GRANDES BARRAGES ER - TY - CHAP A1 - Boes, R.M. A1 - Hagemann-Müller, M. A1 - Albaryak, I. A1 - Müller, B. A1 - Caspescha, L. A1 - Flepp, A. A1 - Jacobs, F. A1 - Auel, C. T1 - Sediment bypass tunnels: Swiss experiences with bypass efficiency and abrasion-resistant invert materials T2 - VINGT SIXIÈME CONGRÈS DES GRANDS BARRAGES, Vienne, Juillet 2018 N2 - In this paper typical bypass efficiencies of sediment bypass tunnels (SBTs) used to counter reservoir sedimentation are described, distinguishing between two layouts of the tunnel intake. It results that SBTs are an effective measure to reduce the sedimentation of dam reservoirs, particularly of type (A) with intake at the reservoir head. The hydroabrasive wear of tunnel inverts is significant and has to be mitigated by using adequate invert liners. The invert abrasion can be estimated based on an abrasion model where a correct input value of the bed material resistance coefficient is paramount to limit model uncertainties. Based on abrasion measurements at prototype SBTs typical values of the material resistance coefficient are recommended for high-strength concrete, natural stones and steel liners. The field experiences gathered so far and the comparison of various invert materials suggest granite pavers as a promising lining material for severe abrasion conditions. Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151399 PB - COMMISSION INTERNATIONALE DES GRANDES BARRAGES ER - TY - CHAP A1 - Auel, C. A1 - Gruber, E. A1 - Kircher, F. A1 - Fritzer, R. A1 - Moritz, C. A1 - Huber, T. T1 - Rehabilitation of Gaulwerk hydropower plant considering environment, sediment management and flood protection T2 - ICOLD Symposium on Sustainable Development of Dams and River Basins, 24th - 27th February, 2021, New Delhi N2 - The Gaulwerk hydropower plant (HPP) has a design discharge of 3.5 m3/s and generates about 6.5 GWh per year. The HPP has been in operation since 1963 and uses the flow of two alpine streams. The HPP impounds a 300 m long reservoir with a 6.50 m high weir. The storage is completely filled with sediments and is classified as a valuable habitat for fauna and flora. Due to the sedimentation, the area upstream of the reservoir head inundates about two to three times per year during small flood events, leading to complaints from affected landowners and adjacent municipalities. To investigate sustainable solutions, a study of alternatives has been carried out in which three alternatives to im-prove both the sediment and flood situation are being investigated. In addition, the residual flow release will be adjusted and fish facilities realized in all alternatives. The paper will summarize the analysis of the alternatives encompassing the (1) flood situation, (2) sediment management, (3) reha-bilitation measures of the hydraulic structures and their costs and (4) the environmental impact. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151377 PB - ICOLD ER - TY - JOUR A1 - Müller-Hagemann, M. A1 - Albayrak, I A1 - Auel, C A1 - Boes, RM T1 - Field Investigation on Hydroabrasion in High-Speed Sediment-Laden Flows at Sediment Bypass Tunnels JF - Water 12 (2) N2 - Wear due to sediment particles in fluid flows, also termed hydroabrasion’ or simply ‘abrasion’, is an omnipresent issue at hydraulic structures as well as in bedrock rivers. However, interactions between flow field, particle motion, channel topography, material properties and abrasion have rarely been investigated on a prototype scale, leaving many open questions as to their quantitative interrelations. Therefore, we investigated hydroabrasion in a multi‐year field study at two Swiss Sediment Bypass Tunnels (SBTs). Abrasion depths of various invert materials, hydraulics and sediment transport conditions were determined and used to compute the abrasion coefficients kv of different abrasion models for high‐strength concrete and granite. The results reveal that these models are useful to estimate spatially averaged abrasion rates. The kv‐value is about one order of magnitude higher for granite than for high‐strength concrete, hence, using material‐specific abrasion coefficients enhances the prediction accuracy. Three‐dimensional flow structures, i.e., secondary currents occurring both, in the straight and curved sections of the tunnels cause incision channels, while also longitudinally undulating abrasion patterns were observed. Furthermore, hydroabrasion concentrated along joints and protruding edges. The maximum abrasion depths were roughly twice the mean abrasion depths, irrespective of hydraulics, sediment transport conditions and invert material. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-151268 PB - MDPI CY - Basel ER - TY - JOUR A1 - Auel, Christian A1 - Boes, Robert M. A1 - Sumi, Tetsuya T1 - Abrasion prediction at Asahi sediment bypass tunnel based on Ishibashi’s formula JF - Journal of Applied Water Engineering and Research Y1 - 2018 U6 - http://dx.doi.org/10.1080/23249676.2016.1265470 SP - 125 EP - 138 ER - TY - JOUR A1 - Fuhrmann, Tim A1 - Gramel, Stefan A1 - Haberkamp, Jens T1 - Recommendations for Non-Potable Water Reuse - Implementation of projects for the reuse of treated wastewater JF - KA International Special Edition 2022/23 N2 - From 2023, new minimum standards for the reuse of treated wastewater will apply in the EU. Internationally, water reuse has already been a relevant issue for some time. Rising water demand worldwide, also as a result of global climate change, is increasing the scarity of freshwater resources in some areas. Reclaimed water is increasingly considered as a valuable substitute for natural water resources. Even before the new EU regulation came into force, DWA has published an extensive report covering a variety of aspects to be considered within the scope of non-potable water reuse. This article provides an overview of that DWA Topics issue “Non-Potable Water Reuse – Development, Technologies and International Framework Conditions for Agricultural, Urban and Industrial Uses”. KW - Water reuse KW - Irrigation KW - Wastewater treatment Y1 - 2022 UR - https://en.dwa.de/files/_media/content/05_PUBLIKATIONEN/Zeitschriften/KA-2022-23-e/KA-2022-03-e/index.html SP - 28 EP - 35 ER - TY - BOOK A1 - Strotmann, Henriette A1 - Astour, Habeb A1 - Hanusrichter, Mario T1 - Vermittlung von BIM in der Hochschullehre: Positionspapier des Arbeitskreises BIM im Baubetrieb des Fachausschusses Baubetrieb und Bauwirtschaft (essentials) KW - BIM KW - Lehre Y1 - 2022 SN - 978-3-658-36958-3 PB - Springer Vieweg CY - Berlin ER - TY - JOUR A1 - Hörnschemeyer, Birgitta A1 - Söfker-Rieniets, Anne A1 - Niesten, Jan A1 - Arendt, Rosalie A1 - Kleckers, Jonas A1 - Klemm, Christian A1 - Stretz, Celestin Julian A1 - Reicher, Christa A1 - Grimsehl-Schmitz, Winona A1 - Wirbals, Daniel A1 - Bach, Vanessa A1 - Finkbeiner, Matthias A1 - Haberkamp, Jens A1 - Budde, Janik A1 - Vennemann, Peter A1 - Walter, Gotthard A1 - Flamme, Sabine A1 - Uhl, Mathias T1 - The ResourcePlan — An Instrument for Resource-Efficient Development of Urban Neighborhoods JF - Sustainability N2 - In Germany, the current sectoral urban planning often leads to inefficient use of resources, partly because municipalities lack integrated planning instruments and argumentation strength toward politics, investors, or citizens. The paper develops the ResourcePlan as (i) legal and (ii) a planning instrument to support the efficient use of resources in urban neighborhoods. The integrative, multi-methodological approach addresses the use of natural resources in the building and infrastructural sectors of (i) water (storm- and wastewater) management, (ii) construction and maintenance of buildings and infrastructure, (iii) urban energy system planning, and (iv) land-use planning. First, the development as legal instrument is carried out, providing (i) premises for integrating resource protection at all legal levels and (ii) options for implementing the ResourcePlan within German municipal structures. Second, the evaluation framework for resource efficiency of the urban neighborhoods is set up for usage as a planning instrument. The framework provides a two-stage process that runs through the phases of setting up and implementing the ResourcePlan. (Eco)system services are evaluated as well as life cycle assessment and economic aspects. As a legal instrument, the ResourcePlan integrates resource protection into municipal planning and decision-making processes. The multi-methodological evaluation framework helps to assess inter-disciplinary resource efficiency, supports the spatial identification of synergies and conflicting goals, and contributes to transparent, resource-optimized planning decisions. KW - resource efficiency KW - resource management KW - urban neighborhood KW - urban planning KW - urban development Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-148545 VL - 14 IS - 3 PB - MDPI ER - TY - BOOK A1 - Strotmann, Henriette T1 - AVA - modellbasiert mit iTWO Unter Verwendung verschiedener Revitmodelle KW - BIM Y1 - 2021 SN - 978-3-658-35301-8 PB - Springer Vieweg CY - Wiesbaden ER - TY - BOOK A1 - Elixmann, Robert A1 - Maaß, Christina A1 - Bruske, Eric Olaf A1 - Eilert, Ron-Henrik A1 - Friedrich, Fabian A1 - Funke, Jens A1 - Fürwentsches, Christian A1 - Kappes, Alexander A1 - Klusmann, Brian A1 - Kugler, Philipp A1 - Petry, Alexander A1 - Strotmann, Henriette A1 - Temme, Leonie T1 - LEISTUNGSSCHNITTSTELLEN BIM-GESAMTKOORDINATION UND BIM-MANAGEMENT Y1 - 2021 PB - DVP Deutscher Verband für Projektmanagement in der Bau- und Immobilienwirtschaft e. V. CY - Berlin ER - TY - BOOK A1 - Elixmann, Robert A1 - Maaß, Christina A1 - Bergjan, Bernhard A1 - Bruske, Eric Olaf A1 - Dengler, Jana A1 - Döinghaus, Peter A1 - Eilert, Ron-Henrik A1 - Friedrich, Fabian A1 - Funke, Jens A1 - Kappes, Alexander A1 - Klusmann, Brian A1 - Kölln, Lars A1 - Machnik, Benrhard A1 - Petry, Alexander A1 - Strotmann, Henriette A1 - Temme, Leonie T1 - PROJEKTMANAGEMENT UND BUILDING INFORMATION MODELING Y1 - 2021 PB - DVP Deutscher Verband für Projektmanagement in der Bau- und Immobilienwirtschaft e. V. CY - Berlin ER - TY - BOOK A1 - Elixmann, Robert A1 - Maaß, Christina A1 - Bruske, Eric Olaf A1 - Eilert, Ron-Henrik A1 - Friedrich, Fabian A1 - Funke, Jens A1 - Fürwentsches, Christian A1 - Grafwallner, Florian A1 - Kappes, Alexander A1 - Klusmann, Brian A1 - Kugler, Philipp A1 - Petry, Alexander A1 - Strotmann, Henriette A1 - Temme, Leonie T1 - Daten und Modelle der Projektsteuerung Y1 - 2021 PB - DVP Deutscher Verband für Projektmanagement in der Bau- und Immobilienwirtschaft e. V. CY - Berlin ER - TY - BOOK A1 - Friedrichsen, Stefanie A1 - Ahting, Steffen T1 - Investition und Finanzierung im Bauunternehmen N2 - Dieses Lehrbuch vermittelt Studierenden des Bauwesens volks- und betriebswirtschaftliche Zusammenhänge sowie die Grundlagen der Finanzierung, Investitions- und Liquiditätsplanung im Bauunternehmen. Ein durchgängiges begleitendes Fallbeispiel aus der Baubranche veranschaulicht in Form von 39 Lernvideos und Erklärvideos den Lehrstoff und erläutert typische Problemstellungen in Bauunternehmen. KW - Investition KW - Finanzierung KW - Baubetriebswirtschaft KW - BWL KW - Betriebswirtschaftslehre Y1 - 2021 SN - 978-3-658-32263-2 U6 - http://dx.doi.org/10.1007/978-3-658-32264-9 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Richter, Lea A1 - Paulsen, Svea A1 - Wichern, Marc A1 - Grömping, Markus A1 - Robecke, Ulrich A1 - Haberkamp, Jens T1 - Hohlfaser-Membrankontaktoren zur Stickstoffrückgewinnung aus Prozesswasser einer kommunalen Kläranlage JF - Chemie Ingenieur Technik N2 - Prozesswasser aus der Faulschlammentwässerung von kommunalen Kläranlagen stellt eine zusätzliche stoffliche Belastung der Anlage in Form von Stickstoff dar. Die Hauptkläranlage Münster betreibt zur Stickstoffentfernung und -rückgewinnung aus Prozesswasser eine innovative Membrankontaktorenanlage im großtechnischen Maßstab. Im Rahmen dieser Studie werden Auswirkungen auf die Leistung und den Betrieb der Membran sowie die Verwertung des produzierten Düngers untersucht. Erste Ergebnisse zeigen Stickstoffentfernungsleistungen von ca. 85 % und eine regionale Verwertbarkeit des produzierten Düngers. Y1 - 2021 U6 - http://dx.doi.org/10.1002/cite.202100019 SN - 1522-2640 VL - 93 IS - 9 SP - 1440 EP - 1444 ER - TY - JOUR A1 - Haberkamp, Jens A1 - Gramel, Stefan A1 - Fuhrmann, Tim T1 - Handlungsempfehlungen für die Wasserwiederverwendung - Umsetzung von Projekten zur Wiederverwendung von aufbereitetem Abwasser JF - Korrespondenz Abwasser, Abfall 68(7) N2 - Ab 2023 gelten in der EU neue Mindeststandards für die Wiederverwendung von aufbereitetem Abwasser – und damit auch in Deutschland. International ist die Wasserwiederverwendung schon länger ein relevantes Thema. Weltweites Bevölkerungswachstum und ein damit einhergehender steigender Wasserbedarf sowie die Folgen des globalen Klimawandels verringern zunehmend die Verfügbarkeit von Süßwasserressourcen. Aufbereitetes Abwasser kann ein wertvoller Ersatz für natürliche Wasserressourcen sein. Der aktuelle DWA-Themenband „Non-Potable Water Reuse – Development, Technologies and International Framework Conditions for Agricultural, Urban and Industrial Uses“ behandelt das breite Spektrum der Wasserwiederverwendung für Nutzungen, bei denen keine Trinkwasserqualität erforderlich ist. Der vorliegende Beitrag bietet einen Überblick über die im Themenband beschriebene Herangehensweise an die Wasserwiederverwendung und die damit verbundenen Herausforderungen. N2 - From 2023, minimum standards for the reuse of treated wastewater will apply in the EU – and thus, also in Germany. Internationally, water reuse is already a relevant topic. Against the background of the world population growth, accompanied by increasing water demand on the one hand and decreasing freshwater resources as a consequence of climate change on the other hand, reclaimed water is increasingly considered as a valuable substitute for natural water resources. DWA has recently published an extensive report covering a variety of aspects to be considered within the scope of non-potable water reuse. This article provides an overview of and excerpts from DWA Topics “Non-Potable Water Reuse – Development, Technologies and International Framework Conditions for Agricultural, Urban and Industrial Uses”. KW - Abwasserreinigung KW - Wasserwiederverwendung KW - Landwirtschaft KW - Bewässerung Y1 - 2021 SN - 1866-0029 SP - 555 EP - 564 ER - TY - BOOK A1 - Friedrichsen, Stefanie T1 - Immobilienbewertung - Grundlagen und Anwendung mit Lernvideos N2 - Dieses Lehrbuch führt in die Grundlagen der Immobilienbewertung ein. Studierende lernen sowohl die normierten Verfahren nach Immobilienwertermittlungsverordnung (ImmoWertV) als auch zwei sog. nicht normierte Verfahren zur Wertermittlung kennen. 23 Kurzvideos zum Vorgehen bei den einzelnen Methoden der Wertermittlung und Beispielrechnungen veranschaulichen den Lehrstoff und unterstützen beim Lernen. Das Lehrbuch ist in der Springer Vieweg Reihe "erfolgreich studieren" erschienen. KW - Immobilienbewertung KW - Verkehrswertermittlung Y1 - 2021 SN - 978-3-658-32256-4 PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Paulsen, Svea A1 - Richter, Lea A1 - Haberkamp, Jens A1 - Robecke, Ulrich A1 - Grömping, Markus T1 - Comparative life cycle analysis of nitrogen recovery from sludge dewatering process water using membrane contactors and the Haber-Bosch process T2 - 14. Aachener Tagung Wassertechnologie 2021 Y1 - 2021 ER - TY - CHAP A1 - Richter, Lea A1 - Paulsen, Svea A1 - Wichern, Marc A1 - Grömping, Markus A1 - Robecke, Ulrich A1 - Haberkamp, Jens T1 - Hohlfaser-Membrankontaktoren zur Stickstoffrückgewinnung aus Prozesswasser einer kommunalen Kläranlage T2 - DGMT-Tagung 2021 - Membranen zum Schutz von Klima und Ressourcen Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:836-opus-137485 ER - TY - JOUR A1 - Haberkamp, Jens A1 - Gramel, Stefan A1 - Fuhrmann, Tim T1 - Opportunities and Challenges for Non-Potable Water Reuse JF - KA International Special Edition N2 - Against the background of the world population growth, accompanied by increasing water demand on the one hand and at least regionally decreasing freshwater resources as a consequence of climate change on the other hand, reclaimed water is increasingly considered as a valuable substitute for natural water resources. DWA has recently published an extensive report covering a variety of aspects to be considered within the scope of non-potable water reuse. This article provides an overview of and excerpts from DWA Topics “Non-Potable Water Reuse – Development, Technologies and International Framework Conditions for Agricultural, Urban and Industrial Uses”. KW - wastewater KW - water reuse KW - wastewater treatment KW - irrigation Y1 - 2020 VL - 2020/21 SP - 22 EP - 29 ER - TY - CHAP A1 - Flamme, Sabine A1 - Kölking, Max A1 - Glorius, Thomas A1 - Mayer, S. T1 - Langzeituntersuchungen zur stoffstromspezifischen Kalibrierung eines nahinfrarotgestützten Echtzeitanalyse-Systems T2 - Konferenzband zur 15. Recy & DepoTech-Konferenz KW - Echtzeitanalyse-System Y1 - 2020 SN - 978-3-200-07190-2 SP - 159 EP - 164 PB - Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft (Eigenverlag) CY - Leoben, Österreich ER - TY - GEN A1 - Flamme, Sabine T1 - Erhöhung der Ressourceneffizienz durch (sensorbasierte) Echtzeitanalyse. 3. EdDE-Zukunftsforum: "Rohstoffgewinnung aus Abfällen und energetische Verwertung im Zeitalter der Digitalisierung", Digitale-Konferenz, 05.11.2020 KW - sensorbasierte Echtzeitanalyse KW - Ressourceneffizienz Y1 - 2020 ER - TY - GEN A1 - Flamme, Sabine T1 - Ressourceneffizientes Bauen: Interdisziplinäre Lösungsansätze des Forschungskollegs Verbund.NRW. Digitale Konferenz, 3.11.2020 KW - Ressourceneffizienz KW - Verbund.NRW Y1 - 2020 ER - TY - GEN A1 - Flamme, Sabine A1 - Walica, Wojciech T1 - Regionale Verwertungspotentiale für mineralische Bauabfälle im Hoch- und Tiefbau. Digitale Konferenz KW - mineralische Bauabfälle Y1 - 2020 ER - TY - GEN A1 - Flamme, Sabine T1 - Chancen und Herausforderungen für die Altholzverwertung durch die Novellierung der Altholzverordnung. Netzwerk Zirkuläre Wertschöpfung :metabolon. 21.09.2020, Lindlar KW - Altholzverordnung KW - Altholzverwertung KW - NovellierungAltholzverordnung Y1 - 2020 ER - TY - GEN A1 - Flamme, Sabine T1 - Stadtquartiere - Rohstofflager der Zukunft (?) KW - Rohstofflager KW - Stadtquartiere Y1 - 2020 ER -