@inproceedings{SauvageAmiauxAustinetal.2016, author = {Sauvage, Marc and Amiaux, J{\´e}rome and Austin, James and Bello, Mara and Bianucci, Giovanni and Chesn{\´e}, Simon and Citterio, Oberto and Collette, Christophe and Correia, S{\´e}bastien and Durand, Gilles A. and Molinari, Sergio and Pareschi, Giovanni and Penfornis, Yann and Sironi, Giorgia and Valsecchi, Guiseppe and Verpoort, Sven and Wittrock, Ulrich}, title = {A development roadmap for critical technologies needed for TALC: a deployable 20m annular space telescope}, series = {Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, Proc. SPIE}, volume = {9904}, booktitle = {Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, Proc. SPIE}, doi = {10.25974/fhms-924}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-9248}, pages = {99041L}, year = {2016}, abstract = {Astronomy is driven by the quest for higher sensitivity and improved angular resolution in order to detect fainter or smaller objects. The far-infrared to submillimeter domain is a unique probe of the cold and obscured Universe, harboring for instance the precious signatures of key elements such as water. Space observations are mandatory given the blocking effect of our atmosphere. However the methods we have relied on so far to develop increasingly larger telescopes are now reaching a hard limit, with the JWST illustrating this in more than one way (e.g. it will be launched by one of the most powerful rocket, it requires the largest existing facility on Earth to be qualified). With the Thinned Aperture Light Collector (TALC) project, a concept of a deployable 20 m annular telescope, we propose to break out of this deadlock by developing novel technologies for space telescopes, which are disruptive in three aspects: \&\#8226; An innovative deployable mirror whose topology, based on stacking rather than folding, leads to an optimum ratio of collecting area over volume, and creates a telescope with an eight times larger collecting area and three times higher angular resolution compared to JWST from the same pre-deployed volume; \&\#8226; An ultra-light weight segmented primary mirror, based on electrodeposited Nickel, Composite and Honeycomb stacks, built with a replica process to control costs and mitigate the industrial risks; \&\#8226; An active optics control layer based on piezo-electric layers incorporated into the mirror rear shell allowing control of the shape by internal stress rather than by reaction on a structure. We present in this paper the roadmap we have built to bring these three disruptive technologies to technology readiness level 3. We will achieve this goal through design and realization of representative elements: segments of mirrors for optical quality verification, active optics implemented on representative mirror stacks to characterize the shape correction capabilities, and mechanical models for validation of the deployment concept. Accompanying these developments, a strong system activity will ensure that the ultimate goal of having an integrated system can be met, especially in terms of (a) scalability toward a larger structure, and (b) verification philosophy.}, language = {en} } @article{KazasidisVerpoortWittrock2019, author = {Kazasidis, Orestis and Verpoort, Sven and Wittrock, Ulrich}, title = {Aberration balancing using an image-sharpness metric}, series = {J. Opt. Soc. Am. A}, volume = {36}, journal = {J. Opt. Soc. Am. A}, number = {8}, doi = {10.1364/JOSAA.36.001418}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-109198}, pages = {1418 -- 1422}, year = {2019}, abstract = {Image-sharpness metrics can be used to optimize optical systems and to control wavefront sensorless adaptive optics systems. We show that for an aberrated system, the numerical value of an image-sharpness metric can be improved by adding specific aberrations. The optimum amplitudes of the additional aberrations depend on the power spectral density of the spatial frequencies of the object.}, language = {en} } @article{VerpoortWittrock2010, author = {Verpoort, Sven and Wittrock, Ulrich}, title = {Actuator patterns for unimorph and bimorph deformable mirrors}, series = {Appl. Opt.}, volume = {49}, journal = {Appl. Opt.}, publisher = {OSA}, doi = {10.25974/fhms-649}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-6490}, pages = {G37 -- G46}, year = {2010}, abstract = {The actuator pattern of an adaptive mirror determines the amplitudes and the fidelities of the mirror deformations that can be achieved. In this study, we analyze and compare different electrode patterns of piezoelectric unimorph deformable mirrors using a numerical finite element model. The analysis allows us to determine the optimum actuator pattern, and it is also applicable to bimorph mirrors. The model is verified by comparing its predictions with experimental results of our prototype of a novel unimorph deformable mirror.}, language = {de} } @inproceedings{KazasidisVerpoortWittrock2018, author = {Kazasidis, Orestis and Verpoort, Sven and Wittrock, Ulrich}, title = {Algorithm design for image-based wavefront control without wavefront sensing}, series = {SPIE Optical Instrument Science, Technology, and Applications, Proc. SPIE}, volume = {10695}, booktitle = {SPIE Optical Instrument Science, Technology, and Applications, Proc. SPIE}, doi = {10.1117/12.2312523}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-14760}, pages = {1069502}, year = {2018}, abstract = {Active optics is an enabling technology for future large space telescopes. Image-based wavefront control uses an image-sharpness metric to evaluate the optical performance. A control algorithm iteratively adapts a corrective element to maximize this metric, without reconstructing the wavefront. We numerically study a sharpness metric in the space of Zernike modes, and reveal that for large aberrations the Zernike modes are not orthogonal with respect to this metric. The findings are experimentally verified by using a unimorph deformable mirror as corrective element. We discuss the implications for the correction process and the design of control algorithms.}, language = {en} } @inproceedings{RauschVerpoortWittrock2012, author = {Rausch, Peter and Verpoort, Sven and Wittrock, Ulrich}, title = {Characterization of a miniaturized unimorph deformable mirror for high power cw-solid state lasers}, series = {Proc. SPIE 8253, MEMS Adaptive Optics VI, 825309}, booktitle = {Proc. SPIE 8253, MEMS Adaptive Optics VI, 825309}, publisher = {SPIE}, doi = {10.25974/fhms-622}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-6226}, year = {2012}, abstract = {We have developed a new type of unimorph deformable mirror for real-time intra-cavity phase control of high power cw-lasers. The approach is innovative in its combination of super-polished and pre-coated highly reflective substrates, the miniaturization of the unimorph principle, and the integration of a monolithic tip/tilt functionality. Despite the small optical aperture of only 9 mm diameter, the mirror is able to produce a stroke of several microns for low order Zernike modes, paired with a residual static root-mean-square aberration of less than 0.04 µm. In this paper, the characteristics of the mirror such as the influence functions, the dynamic behavior, and the power handling capability are reported. The mirror was subjected to a maximum of 490 W of laser-light at a wavelength of 1030 nm. Due to the high reflectivity of over 99.998 percent the mirror is able to withstand intensities up to 1.5 MW/cm2.}, language = {en} } @inproceedings{VerpoortWittrock2011, author = {Verpoort, Sven and Wittrock, Ulrich}, title = {Deformable mirrors for high power lasers}, series = {Proceedings of the 8th International Workshop on Adaptive Optics for Industry and Medicine (AOIM)}, booktitle = {Proceedings of the 8th International Workshop on Adaptive Optics for Industry and Medicine (AOIM)}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-106953}, year = {2011}, abstract = {It has been shown that the beam quality and the efficiency of high-power solid-state lasers could be enhanced by the use of deformable mirrors in order to compensate for optical aberrations. An intracavity compensation requires a deformable mirror which is capable of handling very high laser intensities. The active diameter of the deformable mirror should be a few millimeters in order to match typical fundamental mode laser beam diameters. There is a wide variety of commercially available deformable mirrors, but neither meets all requirements.}, language = {en} } @article{KazasidisVerpoortSolovievetal.2018, author = {Kazasidis, Orestis and Verpoort, Sven and Soloviev, Oleg and Vdovin, Gleb and Verhaegen, Michel and Wittrock, Ulrich}, title = {Extended-image-based correction of aberrations using a deformable mirror with hysteresis}, series = {Opt. Expr.}, volume = {26}, journal = {Opt. Expr.}, doi = {10.1364/OE.26.027161}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-14759}, pages = {27161 -- 27178}, year = {2018}, abstract = {With a view to the next generation of large space telescopes, we investigate guide-star-free, image-based aberration correction using a unimorph deformable mirror in a plane conjugate to the primary mirror. We designed and built a high-resolution imaging testbed to evaluate control algorithms. In this paper we use an algorithm based on the heuristic hill climbing technique and compare the correction in three different domains, namely the voltage domain, the domain of the Zernike modes, and the domain of the singular modes of the deformable mirror. Through our systematic experimental study, we found that successive control in two domains effectively counteracts uncompensated hysteresis of the deformable mirror.}, language = {en} } @article{VerpoortBittnerWittrock2020, author = {Verpoort, Sven and Bittner, Matthias and Wittrock, Ulrich}, title = {Fast focus-shifter based on a unimorph deformable mirror}, series = {Applied Optics}, volume = {59}, journal = {Applied Optics}, number = {23}, organization = {Optical Society of America}, issn = {1559-128X}, doi = {10.1364/AO.397495}, pages = {6959 -- 6965}, year = {2020}, abstract = {On-the-fly remote laser processing plays an increasingly important role in modern fabrication techniques. These processes require guiding of the focus of a laser beam along the contours of the workpiece in three dimensions. State-of-the-art galvanometer scanners already provide highly dynamic and precise transverse x-y beam steering. However, longitudinal focus shifting ("z-shifting") relying on conventional optics is restricted to a bandwidth of a few hundred Hz. We have developed and manufactured a fast piezo-based z-shifting mirror with diffraction-limited surface fidelity providing a focus shift of 1z> 60 mm with an actuation rate of 2 kHz.}, language = {en} } @inproceedings{KazasidisVerpoortWittrock2019, author = {Kazasidis, Orestis and Verpoort, Sven and Wittrock, Ulrich}, title = {Image-based wavefront correction for space telescopes}, series = {International Conference on Space Optics - ICSO 2018}, booktitle = {International Conference on Space Optics - ICSO 2018}, publisher = {Proc. SPIE}, doi = {10.1117/12.2536206}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-109036}, pages = {111807Z}, year = {2019}, abstract = {With a view to future large space telescopes, we investigate image-based wavefront correction with active optics. We use an image-sharpness metric as merit function to evaluate the image quality, and the Zernike modes as control variables. In severely aberrated systems, the Zernike modes are not orthogonal to each other with respect to this merit function. Using wavefront maps, the PSF, and the MTF, we discuss the physical causes for the non-orthogonality of the Zernike modes with respect to the merit function. We show that for combinations of Zernike modes with the same azimuthal order, a flatter wavefront in the central region of the aperture is more important than the RMS wavefront error across the full aperture for achieving a better merit function. The non-orthogonality of the Zernike modes with respect to the merit function should be taken into account when designing the algorithm for image-based wavefront correction, because it may slow down the process or lead to premature convergence.}, language = {en} } @incollection{VerpoortWittrock2009, author = {Verpoort, Sven and Wittrock, Ulrich}, title = {Miniaturized adaptive mirror for solid state laser resonators}, series = {Proceedings of the 7th International Workshop on Adaptive Optics for Industry and Medicine, Shatura, Russia}, booktitle = {Proceedings of the 7th International Workshop on Adaptive Optics for Industry and Medicine, Shatura, Russia}, year = {2009}, language = {en} }