@article{IbenthalBackhaus2019,
  author    = {Ibenthal, E. and Backhaus, C.},
  title     = {Integration von Menschen mit Demenz in die Entwicklung von Mensch-System-Schnittstellen am Beispiel eines Audiosystems},
  series = {Z. Arb. Wiss},
  volume    = {73},
  journal   = {Z. Arb. Wiss},
  number    = {1},
  doi       = {10.1007/s41449-018-00141-y},
  pages     = {100 -- 107},
  year      = {2019},
  language  = {de}
}
@article{MuellerBackhaus2019,
  author    = {M{\"u}ller, L. and Backhaus, C.},
  title     = {Questionnaire to evaluate user acceptance before purchasing medical devices in health facilities},
  series = {Contribution to the Annual Meeting of German Society of Biomedical Engineering},
  journal   = {Contribution to the Annual Meeting of German Society of Biomedical Engineering},
  doi       = {10.1515/bmt-2019-6017},
  pages     = {79},
  year      = {2019},
  language  = {en}
}
@article{PawelzikLoebbeckeMeyeretal.2019,
  author    = {Pawelzik, L. and L{\"o}bbecke, F. and Meyer, S. and Stingl, C. and Velde, L. and Deters, P. and Ibenthal, E. and Backhaus, C.},
  title     = {Untersuchung zum Einsatz von Augmented-Reality-Brillen in der Kardiotechnik},
  series = {Kardiotechnik},
  volume    = {28},
  journal   = {Kardiotechnik},
  issn      = {0941-2670},
  pages     = {71-76},
  year      = {2019},
  language  = {de}
}
@article{PawelzikIbenthalBackhaus2019,
  author    = {Pawelzik, L. and Ibenthal, E. and Backhaus, C.},
  title     = {Learning by Researching - Students enhance perfusionist's workplace with data glasses in internships},
  series = {Current Directions in Biomedical Engineering},
  volume    = {5},
  journal   = {Current Directions in Biomedical Engineering},
  number    = {1},
  doi       = {10.1515/cdbme-2019-0033},
  pages     = {127 -- 130},
  year      = {2019},
  language  = {en}
}
@article{MuellerSobkowiczIbenthaletal.2019,
  author    = {M{\"u}ller, L. and Sobkowicz, S. and Ibenthal, E. and Backhaus, C.},
  title     = {Usability assessment of patient hoists as a purchasing guide for health facilities},
  series = {Current Directions in Biomedical Engineering},
  volume    = {5},
  journal   = {Current Directions in Biomedical Engineering},
  doi       = {10.1515/cdbme-2019-0036},
  pages     = {141 -- 144},
  year      = {2019},
  language  = {en}
}
@article{WollbrinkDobelSalvariaetal.2019,
  author    = {Wollbrink, Andreas and Dobel, Christian and Salvaria, Vasiliki and Paraskevopoulosb, Evangelos and Kisker, Christian and Mittmann, Karin and Pantev, Christo},
  title     = {Choice of test stimulus matters for pitch matching performance:Comparison between pure tone and narrow band noise},
  series = {Hearing Research},
  volume    = {381},
  journal   = {Hearing Research},
  number    = {107776},
  doi       = {10.1016/j.heares.2019.107776},
  pages     = {1 -- 11},
  year      = {2019},
  language  = {en}
}
@article{PeikenkampLoebbeckeDeters2019,
  author    = {Peikenkamp, K. and L{\"o}bbecke, F. and Deters, P.},
  title     = {Measurement of torsion in running shoes - a pilot study},
  series = {Footwear Science},
  volume    = {11/2019},
  journal   = {Footwear Science},
  number    = {S1},
  issn      = {1942-4280},
  pages     = {80 -- 82},
  year      = {2019},
  language  = {en}
}
@article{Peikenkamp2019,
  author    = {Peikenkamp, K.},
  title     = {Comparison of two pressure measuring insole systems and consequences for the practice},
  series = {Foot \& Shoe},
  journal   = {Foot \& Shoe},
  issn      = {2193-9780},
  pages     = {20 -- 23},
  year      = {2019},
  language  = {en}
}
@article{DirksenDetersPeikenkamp2019,
  author    = {Dirksen, N. and Deters, P. and Peikenkamp, K.},
  title     = {Numerical simulation of Compression Testing according to DIN EN 12568 of Steel Toe Caps for Safety Footwear},
  series = {Footwear Science},
  volume    = {11/2019},
  journal   = {Footwear Science},
  number    = {S1},
  issn      = {1942-4280},
  pages     = {182 -- 184},
  year      = {2019},
  language  = {en}
}
@article{KerkhoffNagelPeikenkampetal.2019,
  author    = {Kerkhoff, Annette and Nagel, Arne and Peikenkamp, Klaus and M{\"o}ller, Michael},
  title     = {Einlagenversorgung bei Knieschmerzen im Ballsport - ein Vergleich zweier Einlagentypen},
  series = {Orthop{\"a}dieschuhtechnik},
  volume    = {11/2019},
  journal   = {Orthop{\"a}dieschuhtechnik},
  issn      = {0334-6026},
  pages     = {20 -- 28},
  year      = {2019},
  language  = {de}
}
@article{MorawetzMaennel2019,
  author    = {Morawetz, Klaus and M{\"a}nnel, Michael},
  title     = {Coexistence of phase transitions and hysteresis near the onset of Bose-Einstein condensation},
  series = {Verhandlungen der DPG},
  journal   = {Verhandlungen der DPG},
  pages     = {1},
  year      = {2019},
  language  = {en}
}
@article{Morawetz2019,
  author    = {Morawetz, Klaus},
  title     = {Exploring anomalies by many-body correlations},
  series = {arXiv},
  journal   = {arXiv},
  pages     = {1 -- 12},
  year      = {2019},
  language  = {en}
}
@article{Morawetz2019,
  author    = {Morawetz, Klaus},
  title     = {Bose condensation of squeezed light},
  series = {Physical Review B 99},
  journal   = {Physical Review B 99},
  doi       = {10.1103/PhysRevB.99.205124},
  pages     = {205124-1 -- 205124-12},
  year      = {2019},
  language  = {en}
}
@article{Morawetz2019,
  author    = {Morawetz, Klaus},
  title     = {Weyl systems: anomal transport normally explained},
  series = {European Physical Journal B 92},
  journal   = {European Physical Journal B 92},
  doi       = {10.1140/epjb/e2019-90514-3},
  pages     = {176-1 -- 176-15},
  year      = {2019},
  language  = {en}
}
@article{Morawetz2019,
  author    = {Morawetz, Klaus},
  title     = {Chiral anomaly in Weyl systems: no violation of classical conservation laws},
  series = {Physics Letter A},
  journal   = {Physics Letter A},
  doi       = {10.1016/j.physleta.2019.01.042},
  pages     = {1362 -- 1363},
  year      = {2019},
  language  = {en}
}
@article{Hochmann2019,
  author    = {Hochmann, David},
  title     = {3D-Printing in Zechnical Orthopedics - Current Status and Oulook},
  series = {How To Treat},
  volume    = {2019},
  journal   = {How To Treat},
  number    = {1},
  pages     = {45 -- 49},
  year      = {2019},
  language  = {en}
}
@article{SchuemmerMertinsSchneideretal.2019,
  author    = {Sch{\"u}mmer, Andreas and Mertins, Hans-Christoph and Schneider, Claus Michael and Adam, Roman and Trellenkamp, Stefan and Borowski, Rene and B{\"u}rgler, Daniel and Juschkin, Larissa and Berges, Ulf},
  title     = {A Scanning Reflection X-ray Microscope for Magnetic Imaging in the EUV Range},
  series = {Journal of Synchrotron Radiation},
  volume    = {2019},
  journal   = {Journal of Synchrotron Radiation},
  number    = {26},
  issn      = {1600-5775},
  doi       = {10.1107/S1600577519012219},
  pages     = {2040 -- 2049},
  year      = {2019},
  abstract  = {The mechanical set up of a novel scanning reflection X-ray microscope is presented. It is based on zone plate optics optimized for reflection mode in the EUV spectral range. The microscope can operate at synchrotron radiation beamlines as well as at laboratory-based plasma light sources. In contrast to established X-ray transmission microscopes that use thin foil samples the new microscope design presented here allows the investigation of any type of bulk materials. Importantly, this permits the investigation of magnetic materials by employing experimental techniques based on the X-ray magnetic circular dichroism (XMCD), the X-ray linear magnetic dichroism or the transversal magneto-optical Kerr effect (T-MOKE). The reliable functionality of the new microscope design has been demonstrated by T-MOKE microscopy spectra of Fe/Cr-wedge/Fe trilayer samples. The spectra were recorded at various photon energies across the Fe 3p edge revealing the orientation of magnetic domains in the sample.},
  language  = {en}
}
@article{ZylaKovalevHeisterkampetal.2019,
  author    = {Zyla, Gordon and Kovalev, Alexander and Heisterkamp, Silas and Esen, Cemal and Gurevich, Evgeny L. and Gorb, Stanislav and Ostendorf, Andreas},
  title     = {Biomimetic structural coloration with tunable degree of angle-independence generated by two-photon polymerization},
  series = {Opt. Materials Express},
  volume    = {9},
  journal   = {Opt. Materials Express},
  pages     = {2630 -- 2639},
  year      = {2019},
  language  = {en}
}
@article{WangPoehlYanetal.2019,
  author    = {Wang, Hao and P{\"o}hl, Fabian and Yan, Kai and Decker, Peer and Gurevich, Evgeny L. and Ostendorf, Andreas},
  title     = {Effects of femtosecond laser shock peening in distilled water on the surface characterizations of NiTi shape memory alloy},
  series = {Appl. Surf. Sci.},
  volume    = {471},
  journal   = {Appl. Surf. Sci.},
  issn      = {0169-4332},
  pages     = {869 -- 877},
  year      = {2019},
  language  = {en}
}
@article{KielBulgakovaOstendorfetal.2019,
  author    = {Kiel, Frederik and Bulgakova, Nadezhda M. and Ostendorf, Andreas and Gurevich, Evgeny L.},
  title     = {Selective Delamination upon Femtosecond Laser Ablation of Ceramic Surfaces},
  series = {Phys. Rev. Applied},
  volume    = {11},
  journal   = {Phys. Rev. Applied},
  doi       = {10.1103/PhysRevApplied.11.024038},
  pages     = {024038},
  year      = {2019},
  language  = {en}
}
@article{KasischkeSubaşıBocketal.2019,
  author    = {Kasischke, Maren and Suba{\c{s}}{\i}, Ersoy and Bock, Claudia and Pham, Duy-Vu and Gurevich, Evgeny L. and Kunze, Ulrich and Ostendorf, Andreas},
  title     = {Femtosecond laser patterning of graphene electrodes for thin-film transistors},
  series = {Appl. Surf. Sci.},
  volume    = {478},
  journal   = {Appl. Surf. Sci.},
  issn      = {0169-4332},
  pages     = {299 -- 303},
  year      = {2019},
  language  = {en}
}
@article{KanitzFoersterHoppiusetal.2019,
  author    = {Kanitz, Alexander and F{\"o}rster, Daniel J. and Hoppius, Jan S. and Weber, Rudolf and Ostendorf, Andreas and Gurevich, Evgeny L.},
  title     = {Pump-probe microscopy of femtosecond laser ablation in air and liquids},
  series = {Appl. Surf. Sci.},
  volume    = {475},
  journal   = {Appl. Surf. Sci.},
  issn      = {0169-4332},
  pages     = {204 -- 210},
  year      = {2019},
  language  = {en}
}
@article{HoppiusMaragkakiKanitzetal.2019,
  author    = {Hoppius, Jan S. and Maragkaki, Stella and Kanitz, Alexander and Gregorčič, Peter and Gurevich, Evgeny L.},
  title     = {Optimization of femtosecond laser processing in liquids},
  series = {Appl. Surf. Sci.},
  volume    = {467-468},
  journal   = {Appl. Surf. Sci.},
  issn      = {0169-4332},
  doi       = {10.1016/j.apsusc.2018.10.121},
  pages     = {255 -- 260},
  year      = {2019},
  language  = {en}
}
@article{DobbelsteinGurevichGeorgeetal.2019,
  author    = {Dobbelstein, Henrik and Gurevich, Evgeny L. and George, Easo P. and Ostendorf, Andreas and Laplanche, Guillaume},
  title     = {Laser metal deposition of compositionally graded TiZrNbTa refractory high-entropy alloys using elemental powder blends},
  series = {Additive Manufacturing},
  volume    = {25},
  journal   = {Additive Manufacturing},
  issn      = {2214-8604},
  doi       = {10.1016/j.addma.2018.10.042},
  pages     = {252 -- 262},
  year      = {2019},
  language  = {en}
}
@article{KanitzKalusGurevichetal.2019,
  author    = {Kanitz, A and Kalus, M-R and Gurevich, E L and Ostendorf, A and Barcikowski, S and Amans, D},
  title     = {Review on experimental and theoretical investigations of the early stage, femtoseconds to microseconds processes during laser ablation in liquid-phase for the synthesis of colloidal nanoparticles},
  series = {Plasma Sources Sci. Technol.},
  volume    = {28},
  journal   = {Plasma Sources Sci. Technol.},
  pages     = {103001 -- 103001},
  year      = {2019},
  language  = {en}
}
@article{KazasidisVerpoortWittrock2019,
  author    = {Kazasidis, Orestis and Verpoort, Sven and Wittrock, Ulrich},
  title     = {Aberration balancing using an image-sharpness metric},
  series = {J. Opt. Soc. Am. A},
  volume    = {36},
  journal   = {J. Opt. Soc. Am. A},
  number    = {8},
  doi       = {10.1364/JOSAA.36.001418},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-109198},
  pages     = {1418 -- 1422},
  year      = {2019},
  abstract  = {Image-sharpness metrics can be used to optimize optical systems and to control wavefront sensorless adaptive optics systems. We show that for an aberrated system, the numerical value of an image-sharpness metric can be improved by adding specific aberrations. The optimum amplitudes of the additional aberrations depend on the power spectral density of the spatial frequencies of the object.},
  language  = {en}
}
@article{Hochmann2019,
  author    = {Hochmann, David},
  title     = {3D-Druck in der Technischen Orthop{\"a}die - Stand und Perspektiven},
  series = {Orthop{\"a}die-Technik},
  volume    = {70},
  journal   = {Orthop{\"a}die-Technik},
  number    = {5},
  issn      = {0340-5591},
  pages     = {18 -- 23},
  year      = {2019},
  language  = {de}
}
@article{Klaus2019,
  author    = {Klaus, Peikenkamp},
  title     = {Vergleich zweier Innenschuhdruckmesssohlen und Konsequenzen f{\"u}r die Praxis},
  series = {Orthop{\"a}dieschuhtechnik},
  volume    = {2019},
  journal   = {Orthop{\"a}dieschuhtechnik},
  number    = {05},
  issn      = {0344-6026},
  pages     = {18 -- 21},
  year      = {2019},
  language  = {de}
}
@article{SchuemmerMertinsSchneideretal.2019,
  author    = {Sch{\"u}mmer, Andreas and Mertins, Hans-Christoph and Schneider, Claus Michael and Adam, Roman and Trellenkamp, S and Borowski, R and Juschkin, L and Berges, u},
  title     = {Fast and easy fabrication methodology of Fresnel zone plates for the extreme ultraviolet and soft x-ray regions},
  series = {Applied Optics},
  volume    = {58},
  journal   = {Applied Optics},
  number    = {4},
  doi       = {10.1364/AO.58.001057},
  pages     = {1057 -- 1063},
  year      = {2019},
  language  = {en}
}