@inproceedings{PassmannausderWiescheJoos2018,
  author    = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz},
  title     = {An Experimental and Numerical Study of Tip-Leakage Flows in an Idealized Turbine Tip Gap at High Mach Numbers},
  series = {Proceedings Turbo Expo 2018},
  booktitle = {Proceedings Turbo Expo 2018},
  address   = {Oslo, Norwegen},
  year      = {2018},
  language  = {en}
}
@inproceedings{ausderWieschePassmann2018,
  author    = {aus der Wiesche, Stefan and Passmann, Maximilian},
  title     = {Analysis of Steam Turbine Blade Tip Excitation Forces by Means of Computational Fluid Dynamics and Experimental Cascade Results},
  series = {Proceedings Turbo Expo 2018},
  booktitle = {Proceedings Turbo Expo 2018},
  address   = {Oslo, Norwegen},
  year      = {2018},
  language  = {en}
}
@inproceedings{PassmannausderWiescheJoosetal.2018,
  author    = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz and Willinger, Reinhard},
  title     = {The Physical Mechanism of Tip Leakage Loss Reduction by Means of Passive Injection in Low Mach Number Flows},
  series = {Proceedings Turbo Expo 2018},
  booktitle = {Proceedings Turbo Expo 2018},
  address   = {Oslo, Norwegen},
  year      = {2018},
  language  = {en}
}
@inproceedings{HasselmannBinKhamalrudinausderWiescheetal.2018,
  author    = {Hasselmann, Karsten and Bin Khamalrudin, Muhammad Aiman and aus der Wiesche, Stefan and Kenig, Eugeny Y.},
  title     = {Optimization of Piece-Wise Conical Nozzles: Theory and Application},
  series = {Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15-20},
  booktitle = {Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15-20},
  address   = {Montreal, Quebec, Canada},
  year      = {2018},
  language  = {en}
}
@inproceedings{ReinkerKenigausderWiesche2018,
  author    = {Reinker, Felix and Kenig, Eugeny Y. and aus der Wiesche, Stefan},
  title     = {CLOWT: A Multifunctional Test Facility for the Investigation of Organic Vapor Flows},
  series = {Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15-20},
  booktitle = {Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15-20},
  address   = {Montreal, Quebec, Canada},
  year      = {2018},
  language  = {en}
}
@incollection{ausderWiesche2018,
  author    = {aus der Wiesche, Stefan},
  title     = {Heat Transfer in Rotating Flows},
  series = {Handbook of Thermal Science and Engineering. Ed. Francis A. Kulacki},
  booktitle = {Handbook of Thermal Science and Engineering. Ed. Francis A. Kulacki},
  publisher = {Springer},
  address   = {New York},
  publisher      = {FH M{\"u}nster - University of Applied Sciences},
  pages     = {647 -- 690},
  year      = {2018},
  language  = {en}
}
@book{OPUS4-15020,
  title     = {Handbuch Dampfturbinen},
  editor    = {aus der Wiesche, Stefan and Joos, Franz},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  doi       = {10.1007/978-3-658-20630-7},
  publisher      = {FH M{\"u}nster - University of Applied Sciences},
  year      = {2018},
  language  = {de}
}
@article{JarkeSchuhBrecheretal.2018,
  author    = {Jarke, Matthias and Schuh, G{\"u}nther and Brecher, Christian and Brockmann, Matthias and Prote, Jan-Phillip},
  title     = {Digital Shadows in the Internet of Production},
  series = {ERCIM News 115 Special Theme: Digital Twins},
  journal   = {ERCIM News 115 Special Theme: Digital Twins},
  year      = {2018},
  abstract  = {Due to highly sophisticated, specialised models and data in production, digital twins, as defined as full digital representations, are neither computationally feasible nor useful. The complementary concept of digital shadows will provide cross-domain data access in real time by combining reduced engineering models and production data analytics.},
  language  = {en}
}
@inproceedings{StalinskiScholz2018,
  author    = {Stalinski, David and Scholz, Dieter},
  title     = {Model-based approach of a decision processing unit in a smart wood-processing company},
  series = {Industry 4.0},
  booktitle = {Industry 4.0},
  publisher = {Scientific technical union of mechanical engineering "industry 4.0"},
  address   = {Sofia},
  issn      = {2534-8582},
  pages     = {292 -- 296},
  year      = {2018},
  abstract  = {The paper deals with the development of a new type of production planning and control in a wood-processing company. The production is already highly automated and data from the production processes are gathered and stored in a database. The project picks up these technical basements in order to automatically provide intelligent decisions and make the factory even smarter.},
  language  = {en}
}
@article{StalinskiScholz2018,
  author    = {Stalinski, David and Scholz, Dieter},
  title     = {Prozessbegleitende Optimierung in der Produktionssteuerung},
  series = {Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  volume    = {113},
  journal   = {Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb},
  number    = {5},
  pages     = {277 -- 280},
  year      = {2018},
  abstract  = {Die Entwicklung einer automatisierten Produktionssteuerung in der Holzveredelung soll logistische Potenziale nutzen und Wettbewerbsvorteile sowie die Standortsicherheit erh{\"o}hen. Dies erfordert die rechnergest{\"u}tzte L{\"o}sung von komplexen Optimierungsaufgaben in stark begrenzter Rechenzeit. Dieser Beitrag stellt einen Ansatz f{\"u}r die prozessbegleitende Optimierung innerhalb der Produktionssteuerung vor, wobei die Praxistauglichkeit der Optimierungsergebnisse im Vordergrund steht.},
  language  = {de}
}
@misc{AnnasElferingJantzenetal.2018,
  author    = {Annas, S. and Elfering, M. and Jantzen, H.-A. and Scholz, J. and Janoske, U.},
  title     = {„Analysis and improvement of the mixing process in biogas plants: Poster presented at MIXING16 conference", Toulouse, ((09.-12.09.2018)},
  year      = {2018},
  language  = {en}
}
@misc{GoellmannMaurer2018,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Optimal Control Problems with Time Delays - Necessary Conditions, Numerical Treatment and Case Studies in Biomedicine, 14th Viennese Conference on Optimal Control and Dynamic Games, Technische Universit{\"a}t Wien, July 3-6, 2018},
  year      = {2018},
  language  = {en}
}
@article{GoellmannMaurer2018,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Optimal control problems with time delays: Two case studies in biomedicine},
  series = {Mathematical Biosciences \& Engineering},
  volume    = {15},
  journal   = {Mathematical Biosciences \& Engineering},
  number    = {5},
  issn      = {1551-0018},
  doi       = {10.3934/mbe.2018051},
  pages     = {1137 -- 1154},
  year      = {2018},
  language  = {en}
}
@incollection{KapitzSchuetzEvaTelgenetal.2018,
  author    = {Kapitz, Marek and Sch{\"u}tz, Franziska and Eva Telgen, and aus der Wiesche, Stefan},
  title     = {ROTATING MINISCUS DURING HELE-SHAW FLOW BOILING OFWATER UNDER SUBATMOSPHERIC PRESSURE WITH JET IMPINGEMENT},
  series = {10th International Conference on Boiling and Condensation Heat Transfe r 12th-15th March 2018 in Nagasaki, Japan},
  booktitle = {10th International Conference on Boiling and Condensation Heat Transfe r 12th-15th March 2018 in Nagasaki, Japan},
  pages     = {1 -- 2},
  year      = {2018},
  language  = {en}
}
@article{KapitzTeigelerWagneretal.2018,
  author    = {Kapitz, Marek and Teigeler, Christian and Wagner, Robert and Helcig, Christian and aus der Wiesche, Stefan},
  title     = {Experimental study of the influence of the Prandtl number on the convective heat transfer from a square cylinder},
  series = {International Journal of Heat and Mass Transfer},
  volume    = {120},
  journal   = {International Journal of Heat and Mass Transfer},
  doi       = {10.1016/j.ijheatmasstransfer.2017.12.032},
  pages     = {471-480},
  year      = {2018},
  language  = {en}
}
@article{AnnasJantzenScjolzetal.2018,
  author    = {Annas, S. and Jantzen, H.-A. and Scjolz, J. and Janoschke, U.},
  title     = {A Scale-up Strategy for the Fluid Flow in Biogas Plants},
  series = {Chemical Engineering \& Technology},
  journal   = {Chemical Engineering \& Technology},
  number    = {3},
  issn      = {1521-4125},
  year      = {2018},
  language  = {en}
}
@incollection{AnnasElferingJantzenetal.2018,
  author    = {Annas, S. and Elfering, M. and Jantzen, H.-A. and Scholz, J. and Janoske, U.},
  title     = {Verbesserung des Mischprozesses von ger{\"u}hrten Biogasanlagen, 8. DGAW Kongress Wien},
  series = {Deutsche Gesellschaft f{\"u}r Abfallwirtschaft e.V. Tagungsband 8. Wissenschaftskongress Abfall- und Ressourcenwirtschaft},
  booktitle = {Deutsche Gesellschaft f{\"u}r Abfallwirtschaft e.V. Tagungsband 8. Wissenschaftskongress Abfall- und Ressourcenwirtschaft},
  edition   = {1},
  publisher = {innsbruck university press},
  address   = {Wien},
  isbn      = {978-3-903187-10-8},
  pages     = {55 -- 59},
  year      = {2018},
  language  = {de}
}
@misc{AnnasElferingJantzenetal.2018,
  author    = {Annas, S. and Elfering, M. and Jantzen, H. and Scholz, J. and Janoske, U.},
  title     = {Einfluss scherverd{\"u}nnender Fluideigenschaften auf den R{\"u}hrprozess in Biogasanlagen ProcessNet Tagung M{\"u}nchen},
  year      = {2018},
  language  = {mul}
}