@inproceedings{WeberAnnasMessingetal.2021, author = {Weber, Lukas and Annas, Sven and Messing, Georg and Elfering, Michael and Jantzen, Hans-Arno and Scholz, J{\"u}rgen}, title = {Entwicklung von Messverfahren zur Geschwindigkeitsmessung in Biogasanlagen}, series = {Biogas in der Landwirtschaft / KTBL (Hg.)}, booktitle = {Biogas in der Landwirtschaft / KTBL (Hg.)}, isbn = {978-3-945088-83-8}, pages = {206 -- 208}, year = {2021}, language = {de} } @incollection{WagnerDoennebrinkReinkeretal.2015, author = {Wagner, Robert and D{\"o}nnebrink, Kai and Reinker, Felix and Hasselmann, Karsten and Rejek, Jonas and aus der Wiesche, Stefan}, title = {A Modular Low-Speed Wind Tunnel with Two Test Sections and Variable Inflow Angle}, series = {Proceedings of the ASME 2015 International Mechanical Engineering Congress \& Exhibition}, booktitle = {Proceedings of the ASME 2015 International Mechanical Engineering Congress \& Exhibition}, address = {Houston, Texas, USA}, year = {2015}, language = {en} } @misc{UhkoetterKurschausderWiesche2012, author = {Uhk{\"o}tter, Stephan and Kursch, Michael and aus der Wiesche, Stefan}, title = {Entwicklung und Validierung eines dreidimensionalen turbulenten mehrphasigen CFD-Analysewerkzeugs f{\"u}r Str{\"o}mungen in Turbinengleitlagern, Jahrestreffen der Fachgruppe W{\"a}rme- und Stoff{\"u}bertragung, Weimar}, year = {2012}, language = {de} } @misc{UhkoetterJoosausderWiesche2013, author = {Uhk{\"o}tter, Stephan and Joos, Franz and aus der Wiesche, Stefan}, title = {Experimentelle und theoretische Untersuchung zum Vermischungsverhalten in hochtourigen Turbinengleitlagertaschen}, year = {2013}, language = {de} } @misc{UhkoetterHelcigausderWiesche2014, author = {Uhk{\"o}tter, Stephan and Helcig, Christian and aus der Wiesche, Stefan}, title = {Konvektionstrocknung unter Ausnutzung transitionaler Abl{\"o}senblasen, Jahrestreffen der Fachgruppen Mehrphasenstr{\"o}mungen und W{\"a}rme- und Stoff{\"u}bertragung, Fulda}, year = {2014}, language = {de} } @article{UhkoetterBeckerCzajkaetal.2012, author = {Uhk{\"o}tter, Stephan and Becker, Adam and Czajka, Holger and aus der Wiesche, Stefan and Brasseler, Sebastian and Ehrhard, Peter}, title = {Grundlagenuntersuchung zu den Str{\"o}mungsverh{\"a}ltnissen in hochtourigen Turbinengleitlagern: Str{\"o}mung in einem Konfusor mit einseitig bewegter Berandung}, series = {Forschung im Ingenieurwesen, Springer-Verlag}, volume = {Volume 76}, journal = {Forschung im Ingenieurwesen, Springer-Verlag}, number = {Numbers 1-2}, year = {2012}, language = {de} } @article{UhkoetterKurschBecketal.2012, author = {Uhkoetter, Stephan and Kursch, Michael and Beck, Christian and aus der Wiesche, Stefan}, title = {Development and Validation of a Three-Dimensional Multiphase Flow Computational Fluid Dynamics Analysis for Journal Bearings in Steam and Heavy Duty Gas Turbines}, series = {Journal of Engineering for Gas Turbines and Power}, volume = {Volume 134, Issue 10}, journal = {Journal of Engineering for Gas Turbines and Power}, doi = {10.1115/1.4007078}, year = {2012}, language = {en} } @incollection{UhkoetterKurschBecketal.2012, author = {Uhkoetter, Stephan and Kursch, Michael and Beck, Christian and aus der Wiesche, Stefan}, title = {Development and Validation of a Three-Dimensional Multiphase Flow CFD Analysis for Journal Bearings in Steam and Heavy Duty Gas Turbines}, series = {ASME Turbo Expo}, booktitle = {ASME Turbo Expo}, address = {Copenhagen}, year = {2012}, language = {en} } @incollection{UhkoetterausderWiescheJoos2013, author = {Uhkoetter, Stephan and aus der Wiesche, Stefan and Joos, Franz}, title = {Investigation of Flow and Mixing Phenomena in an Oil Supply Pocket of a Heavy Duty Gas Turbine Journal Bearing}, series = {ASME Turbo Expo}, booktitle = {ASME Turbo Expo}, address = {San Antonio, USA}, year = {2013}, language = {en} } @incollection{UhkoetterausderWiescheJoos2014, author = {Uhkoetter, Stephan and aus der Wiesche, Stefan and Joos, Franz}, title = {Detailed CFD Modeling of the Mixing Behavior in Oil Supply Pockets of Heavy Duty Gas and Steam Turbine Journal Bearings}, series = {ASME Turbo Expo}, booktitle = {ASME Turbo Expo}, address = {Duesseldorf, Germany}, year = {2014}, language = {en} } @incollection{UhkoetterausderWiesche2014, author = {Uhkoetter, Stephan and aus der Wiesche, Stefan}, title = {Turbulent Flow and Jet-Interaction in a Smooth Lid-Driven-Cavity}, series = {ASME Fluids Engineering Division Summer Meeting}, booktitle = {ASME Fluids Engineering Division Summer Meeting}, address = {Chicago, Illinois, USA}, year = {2014}, language = {en} } @incollection{UhkoetterausderWiesche2013, author = {Uhkoetter, Stephan and aus der Wiesche, Stefan}, title = {Experimental and Numerical Investigation of the Turbulent Flow in a Smooth Lid-Driven-Cavity}, series = {ASME Fluids Engineering Division Summer Meeting}, booktitle = {ASME Fluids Engineering Division Summer Meeting}, address = {Incline Village, Nevada, USA}, year = {2013}, language = {en} } @misc{TeigelerHelcigausderWiesche2015, author = {Teigeler, Christian and Helcig, Christian and aus der Wiesche, Stefan}, title = {Experimental Investigation of the Laminar Boundary Layer Flow over a Rotating Wavy Disk, IMECE2015 Houston, Texas}, year = {2015}, language = {en} } @inproceedings{SundermeierPassmannausderWiescheetal.2021, author = {Sundermeier, Stephan and Passmann, Maximilian and aus der Wiesche, Stefan and Kenig, Eugeny Y.}, title = {Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers}, series = {Proceedings European Turbomachinery Conference (ETC) 14, 12.-16.04.2021, Gdansk, Polen}, booktitle = {Proceedings European Turbomachinery Conference (ETC) 14, 12.-16.04.2021, Gdansk, Polen}, year = {2021}, language = {en} } @article{SundermeierPassmannausderWiescheetal.2022, author = {Sundermeier, Stephan and Passmann, Maximilian and aus der Wiesche, Stefan and Kenig, Eugeny Y.}, title = {Flow in Pillow-Plate Channels for High-Speed Turbomachinery Heat Exchangers}, series = {Int. J. Turbomachinery Propulsion Power}, volume = {7}, journal = {Int. J. Turbomachinery Propulsion Power}, number = {12}, doi = {10.3390/ijtpp7020012}, year = {2022}, language = {en} } @inproceedings{SundermeierMatarausderWiescheetal.2022, author = {Sundermeier, Stephan and Matar, Camille and aus der Wiesche, Stefan and Cinnella, Paola and Hake, Leander and Gloerfelt, Xavier}, title = {Experimental and numerical study of transonic flow of an organic vapor past a circular cylinder}, series = {Proceedings of the 4th International Seminar on Non Ideal Compressible Fluid Dynamics for Propulsion and Power, 3rd and 4th November 2022, City, University of London, UK}, booktitle = {Proceedings of the 4th International Seminar on Non Ideal Compressible Fluid Dynamics for Propulsion and Power, 3rd and 4th November 2022, City, University of London, UK}, doi = {10.1007/978-3-031-30936-6_21}, year = {2022}, language = {en} } @book{Steinke1992, author = {Steinke, Peter}, title = {Finite-Element-Methode}, edition = {1. Aufl.}, publisher = {Cornelsen Girardet}, address = {D{\"u}sseldorf}, isbn = {3-464-48013-5}, pages = {224 S. : graph. Darst.}, year = {1992}, language = {de} } @book{Steinke2004, author = {Steinke, Peter}, title = {Finite-Elemente-Methode}, edition = {1. Aufl.}, publisher = {Springer}, address = {Berlin [u.a.]}, isbn = {3-540-44226-X}, pages = {XIII, 328 S. : Ill., graph. Da}, year = {2004}, language = {de} } @article{StalinskiScholz2018, author = {Stalinski, David and Scholz, Dieter}, title = {Prozessbegleitende Optimierung in der Produktionssteuerung}, series = {Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, volume = {113}, journal = {Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, number = {5}, pages = {277 -- 280}, year = {2018}, abstract = {Die Entwicklung einer automatisierten Produktionssteuerung in der Holzveredelung soll logistische Potenziale nutzen und Wettbewerbsvorteile sowie die Standortsicherheit erh{\"o}hen. Dies erfordert die rechnergest{\"u}tzte L{\"o}sung von komplexen Optimierungsaufgaben in stark begrenzter Rechenzeit. Dieser Beitrag stellt einen Ansatz f{\"u}r die prozessbegleitende Optimierung innerhalb der Produktionssteuerung vor, wobei die Praxistauglichkeit der Optimierungsergebnisse im Vordergrund steht.}, language = {de} } @inproceedings{StalinskiScholz2018, author = {Stalinski, David and Scholz, Dieter}, title = {Model-based approach of a decision processing unit in a smart wood-processing company}, series = {Industry 4.0}, booktitle = {Industry 4.0}, publisher = {Scientific technical union of mechanical engineering "industry 4.0"}, address = {Sofia}, issn = {2534-8582}, pages = {292 -- 296}, year = {2018}, abstract = {The paper deals with the development of a new type of production planning and control in a wood-processing company. The production is already highly automated and data from the production processes are gathered and stored in a database. The project picks up these technical basements in order to automatically provide intelligent decisions and make the factory even smarter.}, language = {en} } @article{SchultzeGranbergJantzenPfeifferetal.2011, author = {Schultze-Granberg, J. and Jantzen, H.-A. and Pfeiffer, S. and Pasel, R.}, title = {"St{\"a}dte mit gutem Klima gesucht. Die Winddurchl{\"a}ssigkeit von Stadtstrukturen"}, series = {FHocus}, journal = {FHocus}, number = {19}, pages = {8 -- 9}, year = {2011}, language = {de} } @article{SchuhHaefnerHopmannetal.2020, author = {Schuh, G{\"u}nther and H{\"a}fner, Constantin and Hopmann, Christian and Rumpe, Bernhard and Brockmann, Matthias and Wortmann, Andreas and Maibaum, Judith and Dalibor, Manuela and Bibow, Pascal and Sapel, Patrick and Kr{\"o}ger, Moritz}, title = {Effizientere Produktion mit Digitalen Schatten}, series = {Effizientere Produktion mit Digitalen Schatten}, volume = {115}, journal = {Effizientere Produktion mit Digitalen Schatten}, number = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, doi = {10.3139/104.112339}, pages = {105 -- 107}, year = {2020}, abstract = {Die Digitalisierung verspricht Unternehmen, die Wandlungsf{\"a}higkeit und Produktivit{\"a}t bestehender Fertigungssysteme zu f{\"o}rdern. Durch die Komplexit{\"a}t cyber-physischer Produktionssysteme liegen Produktionsdaten jedoch heterogen, unstrukturiert und isoliert vor. Die f{\"u}r eine konkrete Aufgabe oder Fragestellung ben{\"o}tigten Daten werden durch Digitale Schatten zielgerichtet verkn{\"u}pft, abstrahiert und aggregiert, sodass eine wissensbasierte und echtzeitf{\"a}hige Entscheidungsfindung in der Produktion m{\"o}glich wird.}, language = {de} } @book{ScholzKramer1996, author = {Scholz, Dieter and Kramer, Bernd}, title = {Bakunin - ?ein Denkmal!}, edition = {1. Aufl.}, publisher = {Kramer}, address = {Berlin}, isbn = {3-87956-220-2}, pages = {268 S. : zahlr. Ill.}, year = {1996}, language = {de} } @book{Scholz1999, author = {Scholz, Dieter}, title = {Pinsel und Dolch}, edition = {1. Aufl.}, publisher = {Reimer}, address = {Berlin}, isbn = {3-496-01199-8}, pages = {477 S. : Ill.}, year = {1999}, language = {de} } @book{Scholz2002, author = {Scholz, Dieter}, title = {Typische Baufehler}, edition = {1. Aufl.}, publisher = {M{\"u}ller}, address = {K{\"o}n}, isbn = {3-481-01357-4}, pages = {225 S. : Ill., graph. Darst.}, year = {2002}, language = {de} } @book{Scholz2005, author = {Scholz, Dieter}, title = {Typische Baufehler}, edition = {2., {\"u}berarb. Aufl.}, publisher = {M{\"u}ller}, address = {K{\"o}ln}, isbn = {3-481-02089-9}, pages = {312 S. : Ill., graph. Darst.}, year = {2005}, language = {de} } @inproceedings{SchollmeierausderWiesche2021, author = {Schollmeier, Jan-Niklas and aus der Wiesche, Stefan}, title = {A user-friendly Pitot probe data reduction Excel-Refprop-Routine for non-ideal gas flow applications}, series = {Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, M{\"u}nchen}, booktitle = {Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, M{\"u}nchen}, address = {M{\"u}nchen}, year = {2021}, language = {en} } @article{SchollmeierausderWiesche2022, author = {Schollmeier, Jan-Niklas and aus der Wiesche, Stefan}, title = {A user-friendly Pitot probe data reduction Excel-Refprop-Routine for non-ideal gas flow applications}, series = {Energy}, volume = {Volume 261, Part A}, journal = {Energy}, number = {15 December 2022}, doi = {10.1016/j.energy.2022.125143}, year = {2022}, language = {en} } @misc{SchnerrJantzenHuber1991, author = {Schnerr, G. H. and Jantzen, H.-A. and Huber, R. R.}, title = {"Digital Image Processing for Schlieren Optics", EUROMECH 279 "Image Analysis as Measuring Technique in Flows", Delft University of Technology, the Netherlands, July 02-05}, year = {1991}, language = {en} } @incollection{SchnerrDohrmannJantzenetal.1989, author = {Schnerr, G. H. and Dohrmann, U. and Jantzen, H.-A. and Huber, R. R.}, title = {" Transsonischen Str{\"o}mungen mit Relaxation und Energiezufuhr durch Wasserdampfkondensation"}, series = {Str{\"o}mungsmechanik und Str{\"o}mungsmaschinen 40 (eds. Felsch, K.O.; Marcinowski, H.; Zierep, J.)}, booktitle = {Str{\"o}mungsmechanik und Str{\"o}mungsmaschinen 40 (eds. Felsch, K.O.; Marcinowski, H.; Zierep, J.)}, publisher = {G.Braun}, address = {Karsruhe}, pages = {39 -- 79}, year = {1989}, language = {de} } @misc{SchnerrBreitlingJantzen1991, author = {Schnerr, G. H. and Breitling, Th. and Jantzen, H.-A.}, title = {"Effects of Heat Addition on Shocks and Turbulent Boundary Layers", EUROMECH 274 "Internal High Speed Flows with Viscous/Inviscid Interactions", Prague, Czechoslovakia, April 08-11}, year = {1991}, language = {en} } @article{SchnerrBohningBreitlingetal.1992, author = {Schnerr, G. H. and Bohning, R. and Breitling, Th. and Jantzen, H.-A.}, title = {"Compressible Turbulent Boundary Lasers with Heat addition by homogeneous Condensation"}, series = {American Institute for Aeronautics and Astronautics (AIAA Journal)}, journal = {American Institute for Aeronautics and Astronautics (AIAA Journal)}, number = {Vol 20, No. 5}, pages = {pp.1284 -- 1289}, year = {1992}, language = {en} } @inproceedings{SchmalackerCakievskiausderWiescheetal.2022, author = {Schmalacker, Michael and Cakievski, Leon and aus der Wiesche, Stefan and Schatz, Markus}, title = {Flow Through a Steam Turbine Cascade with a Single Damaged Blade: Effect of Blade Height on Loss and Outflow Angle Distribution}, series = {Proceedings ASME Turbo Expo, 11.-17.6.2022, Rotterdam, Niederlande}, booktitle = {Proceedings ASME Turbo Expo, 11.-17.6.2022, Rotterdam, Niederlande}, doi = {10.1115/GT2022-80950}, year = {2022}, language = {en} } @article{RinkerTerbrack2011, author = {Rinker, Ulrich and Terbrack, Herbert}, title = {Einpress-Gewindebuchsen aus Hartkunststoff; Neuartige Verbindungstechnik verbindet Wirtschaftlichkeit und hohe Haltekraft}, series = {VDI-Z}, volume = {153}, journal = {VDI-Z}, number = {Nr. 7/8 Juli/August}, pages = {61 -- 63}, year = {2011}, language = {de} } @article{RinkerSchuetze2009, author = {Rinker, Ulrich and Sch{\"u}tze, Rainer}, title = {Bohren mit Minmalmengenschmierung; Reduzierung der Bearbeitungszeit um 50\%}, series = {VDI-Z Spezial Werkzeuge}, journal = {VDI-Z Spezial Werkzeuge}, number = {September 2009}, pages = {51 -- 53}, year = {2009}, language = {de} } @article{Rinker2010, author = {Rinker, Ulrich}, title = {Reiben und Tieflochbohren mit Minimalmengenschmierung}, series = {Ingenieurspiegel, Fachmagazin f{\"u}r Ingenieure}, journal = {Ingenieurspiegel, Fachmagazin f{\"u}r Ingenieure}, number = {3/2010}, pages = {8 -- 10}, year = {2010}, language = {de} } @article{Rinker2009, author = {Rinker, Ulrich}, title = {Optimierung der Zerspanung durch hochwertige Messtechnik}, series = {Ingenieurspiegel}, journal = {Ingenieurspiegel}, number = {3 / 2009}, pages = {58 -- 60}, year = {2009}, language = {de} } @article{Rinker2011, author = {Rinker, Ulrich}, title = {Erfolgreiche Bearbeitung mit Minimalmengenschmierung; Stand der Technik am Beispiel der Stahlsorten St52-3 und 16MnCr5}, series = {VDI-Z Spezial Werkzeuge}, journal = {VDI-Z Spezial Werkzeuge}, number = {Mai 2011}, pages = {34 -- 37}, year = {2011}, language = {de} } @article{Rinker2011, author = {Rinker, Ulrich}, title = {Erfolgreiche Bearbeitung mit MMS bei rostfreiem Stahl und Aluminium; Stand der Technik beim Drehen, Fr{\"a}sen, Schlitzfr{\"a}sen und Bohren}, series = {VDI-Z Spezial Werkzeuge}, journal = {VDI-Z Spezial Werkzeuge}, number = {August 2011}, pages = {44 -- 46}, year = {2011}, language = {de} } @article{Rinker2011, author = {Rinker, Ulrich}, title = {Halbierung der Bearbeitungszeit durch den Einsatz der Minimalmengenschmierung}, series = {Ingenieurspiegel, Fachmagazin f{\"u}r Ingenieure}, journal = {Ingenieurspiegel, Fachmagazin f{\"u}r Ingenieure}, number = {3/2011}, pages = {14 -- 16}, year = {2011}, language = {de} } @article{Rinker2012, author = {Rinker, Ulrich}, title = {Analyse der Spanform sowie der Schnittkr{\"a}fte am Beispiel des Orthogonaldrehprozesses}, series = {Ingenieurspiegel, Fachmagazin f{\"u}r Ingenieure}, journal = {Ingenieurspiegel, Fachmagazin f{\"u}r Ingenieure}, number = {3/2012}, pages = {51 -- 53}, year = {2012}, language = {de} } @incollection{Rinker2014, author = {Rinker, Ulrich}, title = {Energieeffiziente Zerspanung mit Minimalmengenschmierung}, series = {Forschungsreport f{\"u}r den Maschinenbau in Nordrhein-Westfalen}, booktitle = {Forschungsreport f{\"u}r den Maschinenbau in Nordrhein-Westfalen}, issn = {2198-395X}, pages = {40 -- 43}, year = {2014}, language = {de} } @article{Rinker1000, author = {Rinker, Ulrich}, title = {Energieeffiziente Zerspanung mit Minimalmengenschmierung}, series = {Ingenieurspiegel, Fachmagazin f{\"u}r Ingenieure}, journal = {Ingenieurspiegel, Fachmagazin f{\"u}r Ingenieure}, number = {3}, pages = {41 -- 44}, year = {1000}, language = {de} } @incollection{RejekausderWiescheWillinger2017, author = {Rejek, Jonas and aus der Wiesche, Stefan and Willinger, Reinhard}, title = {Blade Tip Leakage Loss Reduction by Means of Passive Tip Injection: Linear Cascade Wind Tunnel Results}, series = {Proceedings ASME Turbo Expo 2017}, booktitle = {Proceedings ASME Turbo Expo 2017}, address = {Charlotte, NC}, isbn = {978-0-7918-5078-7}, doi = {10.1115/GT2017-63083}, pages = {V02AT40A003}, year = {2017}, language = {en} } @book{Rejek2017, author = {Rejek, Jonas}, title = {Verlustbestimmung im Abstr{\"o}mfeld einer Schaufelkaskade mit passiver Einblasung}, volume = {XXII}, edition = {1}, publisher = {Springer Spektrum}, address = {Wiesbaden}, isbn = {978-3-658-18620-3}, doi = {10.1007/978-3-658-18621-0}, pages = {147}, year = {2017}, language = {de} } @incollection{ReinkerWagnerPassmannetal.2020, author = {Reinker, Felix and Wagner, Robert and Passmann, Maximilian and Hake, Leander and aus der Wiesche, Stefan}, title = {Performance of a Rotatable Cylinder Pitot Probe in High Subsonic Non-ideal Gas Flows}, series = {Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. Hrsg.: Matteo Pini, Carlo de Servi, Andrea Spinelli, Francesca di Mare, Alberto Guardone. ERCOFTAC Series book series (ERCO, volume 28)}, booktitle = {Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. Hrsg.: Matteo Pini, Carlo de Servi, Andrea Spinelli, Francesca di Mare, Alberto Guardone. ERCOFTAC Series book series (ERCO, volume 28)}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-030-69306-0}, doi = {10.1007/978-3-030-69306-0}, publisher = {FH M{\"u}nster - University of Applied Sciences}, pages = {144 -- 152}, year = {2020}, language = {en} } @article{ReinkerWagnerHakeetal.2021, author = {Reinker, Felix and Wagner, Robert and Hake, Leander and aus der Wiesche, Stefan}, title = {High subsonic flow of an organic vapor past a circular cylinder}, series = {Experiments in Fluids}, volume = {62}, journal = {Experiments in Fluids}, number = {54}, year = {2021}, language = {en} } @article{ReinkerKenigPassmannetal.2017, author = {Reinker, Felix and Kenig, Eugeny Y. and Passmann, Max and aus der Wiesche, Stefan}, title = {Closed Loop Organic Wind Tunnel (CLOWT): Design, Components and Control System.}, series = {Energy Procedia}, volume = {129}, journal = {Energy Procedia}, pages = {200 -- 207}, year = {2017}, language = {en} } @inproceedings{ReinkerKenigausderWiesche2018, author = {Reinker, Felix and Kenig, Eugeny Y. and aus der Wiesche, Stefan}, title = {CLOWT: A Multifunctional Test Facility for the Investigation of Organic Vapor Flows}, series = {Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15-20}, booktitle = {Proceedings ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, July 15-20}, address = {Montreal, Quebec, Canada}, year = {2018}, language = {en} } @incollection{ReinkerKapitzausderWiesche2013, author = {Reinker, Felix and Kapitz, Marek and aus der Wiesche, Stefan}, title = {Boiling under Hele-Shaw Flow Conditions: The Occurrence of Viscous Fingering}, series = {Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition (IMECE2013)}, booktitle = {Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition (IMECE2013)}, address = {San Diego, CA}, year = {2013}, language = {en} } @misc{ReinkerKapitzausderWiesche2013, author = {Reinker, Felix and Kapitz, Marek and aus der Wiesche, Stefan}, title = {Untersuchung des Blasensiedens unter Hele-Shaw Str{\"o}mungsbedingungen, Jahrestreffen der Fachgruppen Fluidverfahrenstechnik W{\"a}rme- und Stoff{\"u}bertragung, 20. - 21. M{\"a}rz 2013, Baden Baden}, year = {2013}, language = {de} } @article{ReinkerKapitzausderWiesche2014, author = {Reinker, Felix and Kapitz, Marek and aus der Wiesche, Stefan}, title = {Fingering during Boiling under Hele-Shaw Flow Conditions}, series = {Journal of Heat Transfer}, volume = {136}, journal = {Journal of Heat Transfer}, number = {8}, pages = {080914 -- 1}, year = {2014}, language = {mul} } @article{ReinkerKapitzausderWiesche2016, author = {Reinker, Felix and Kapitz, Marek and aus der Wiesche, Stefan}, title = {Boiling under Hele-Shaw Flow Conditions: The Occurrence of Viscous Fingering}, series = {Journal of Heat Transfer}, volume = {138}, journal = {Journal of Heat Transfer}, number = {2}, pages = {021501 -- 8}, year = {2016}, language = {en} } @incollection{ReinkerHasselmannausderWiescheetal.2015, author = {Reinker, Felix and Hasselmann, Karsten and aus der Wiesche, Stefan and Kenig, Eugeny Y.}, title = {Thermodynamics and Fluid Mechanics of a Closed Blade Cascade Wind Tunnel for Organic Vapors}, series = {Proceedings of ASME Turbo Expo}, booktitle = {Proceedings of ASME Turbo Expo}, address = {Montreal, Canada}, doi = {10.1115/GT2015-42372}, year = {2015}, language = {en} } @article{ReinkerHasselmannausderWiescheetal.2015, author = {Reinker, Felix and Hasselmann, Karsten and aus der Wiesche, Stefan and Kenig, Eugeny Y.}, title = {Thermodynamics and Fluid Mechanics of a Closed Blade Cascade Wind Tunnel for Organic Vapors}, series = {Journal of Engineering for Gas Turbines and Power}, volume = {138}, journal = {Journal of Engineering for Gas Turbines and Power}, number = {5}, doi = {10.1115/1.4031390}, pages = {052601}, year = {2015}, language = {en} } @inproceedings{ReinkerausderWiescheKenig2019, author = {Reinker, Felix and aus der Wiesche, Stefan and Kenig, Eugeny Y.}, title = {Closed Loop Organic Vapor Wind Tunnel CLOWT: Commissioning and Operational Experience}, series = {Proceedings 5th International Seminar on ORC Power Systems}, booktitle = {Proceedings 5th International Seminar on ORC Power Systems}, address = {Athen, Griechenland}, year = {2019}, language = {en} } @inproceedings{ReinkerausderWiescheFritscheetal.2019, author = {Reinker, Felix and aus der Wiesche, Stefan and Fritsche, Manuel and Epple, Philipp and Russwurm, Hans J{\"o}rg}, title = {Testing, modeling and simulation of fans working with organic vapors}, series = {Proceedings ETC13, 2019, Lausanne, Schweiz (Beitrag: ETC2019-326)}, booktitle = {Proceedings ETC13, 2019, Lausanne, Schweiz (Beitrag: ETC2019-326)}, year = {2019}, language = {en} } @incollection{ReinkerausderWiesche2020, author = {Reinker, Felix and aus der Wiesche, Stefan}, title = {Application of Hot-Wire Anemometry in the High Subsonic Organic Vapor Flow Regime}, series = {Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. Hrsg.: Matteo Pini, Carlo de Servi, Andrea Spinelli, Francesca di Mare, Alberto Guardone. ERCOFTAC Series book series (ERCO, volume 28)}, booktitle = {Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. Hrsg.: Matteo Pini, Carlo de Servi, Andrea Spinelli, Francesca di Mare, Alberto Guardone. ERCOFTAC Series book series (ERCO, volume 28)}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-030-69306-0}, doi = {10.1007/978-3-030-69306-0}, publisher = {FH M{\"u}nster - University of Applied Sciences}, pages = {135 -- 143}, year = {2020}, language = {en} } @incollection{PutzBrecherBrockmann2019, author = {Putz, Matthias and Brecher, Christian and Brockmann, Matthias}, title = {Energieflexibilit{\"a}t im Maschinen- und Anlagenbau}, series = {Energieflexibilit{\"a}t in der Deutschen Industrie: Ergebnisse aus dem Kopernikus-Projekt - Synchronisierte und energieadaptive Produktionstechnik zur flexiblen Ausrichtung von Industrieprozessen auf eine fluktuierende Energieversorgung (SynErgie). Hrsg. Sauer, Abele, Buhl}, booktitle = {Energieflexibilit{\"a}t in der Deutschen Industrie: Ergebnisse aus dem Kopernikus-Projekt - Synchronisierte und energieadaptive Produktionstechnik zur flexiblen Ausrichtung von Industrieprozessen auf eine fluktuierende Energieversorgung (SynErgie). Hrsg. Sauer, Abele, Buhl}, publisher = {Fraunhofer Verlag}, isbn = {978-3-8396-1479-2}, publisher = {FH M{\"u}nster - University of Applied Sciences}, pages = {644 -- 675}, year = {2019}, abstract = {Energie aus erneuerbaren Ressourcen ist nicht immer beliebig verf{\"u}gbar. Je nach Jahreszeit und Witterung variiert beispielsweise die durch Solarparks oder Windkraftanlagen zur Verf{\"u}gung gestellte Leistung. Durch den kontinuierlichen Ausbau der erneuerbaren Energien wird sich die Volatilit{\"a}t im Energiesystem in Zukunft immer st{\"a}rker auspr{\"a}gen. Die Industrie auf die sich {\"a}ndernden Versorgungsstrukturen vorzubereiten und anzupassen ist eine große Herausforderung der n{\"a}chsten Jahrzehnte. Unternehmen m{\"u}ssen zuk{\"u}nftig ihre Prozesse und Betriebsorganisation so gestalten k{\"o}nnen, dass sich der Energieverbrauch zumindest in Teilen flexibel an das volatile Energieangebot anpassen kann. Neben der Entwicklung von Technologien, Konzepten und Maßnahmen zur energetischen Flexibilisierung von industriellen Prozessen liegt ein zweiter Schwerpunkt zuk{\"u}nftiger Arbeiten auf der Entwicklung einer durchg{\"a}ngigen IT-Infrastruktur, mit der Unternehmen und Energieanbieter in Zukunft Informationen von der Produktionsmaschine bis zu den Energiem{\"a}rkten bereitstellen und austauschen k{\"o}nnen. Dies f{\"u}hrt zu einem Paradigmenwechsel im Betrieb industrieller Prozesse - weg vom kontinuierlichen und rein nachfragegetriebenen Energieverbrauch hin zum anpassbaren, energieflexiblen Betrieb industrieller Anlagen.}, language = {de} } @article{PennekampBuchholzDahlmannsetal.2021, author = {Pennekamp, Jan and Buchholz, Erik and Dahlmanns, Markus and Kunze, Ike and Braun, Stefan and Wagner, Eric and Brockmann, Matthias and Wehrle, Klaus and Henze, Martin}, title = {Collaboration is not Evil: A Systematic Look at Security Research for Industrial Use}, series = {Learning from Authoritative Security Experiment Results (LASER) 2020}, journal = {Learning from Authoritative Security Experiment Results (LASER) 2020}, doi = {10.14722/laser-acsac.2020.23088}, year = {2021}, abstract = {Following the recent Internet of Things-induced trends on digitization in general, industrial applications will further evolve as well. With a focus on the domains of manufacturing and production, the Internet of Production pursues the vision of a digitized, globally interconnected, yet secure environment by establishing a distributed knowledge base. Background. As part of our collaborative research of advancing the scope of industrial applications through cybersecurity and privacy, we identified a set of common challenges and pitfalls that surface in such applied interdisciplinary collaborations. Aim. Our goal with this paper is to support researchers in the emerging field of cybersecurity in industrial settings by formalizing our experiences as reference for other research efforts, in industry and academia alike. Method. Based on our experience, we derived a process cycle of performing such interdisciplinary research, from the initial idea to the eventual dissemination and paper writing. This presented methodology strives to successfully bootstrap further research and to encourage further work in this emerging area. Results. Apart from our newly proposed process cycle, we report on our experiences and conduct a case study applying this methodology, raising awareness for challenges in cybersecurity research for industrial applications. We further detail the interplay between our process cycle and the data lifecycle in applied research data management. Finally, we augment our discussion with an industrial as well as an academic view on this research area and highlight that both areas still have to overcome significant challenges to sustainably and securely advance industrial applications. Conclusions. With our proposed process cycle for interdisciplinary research in the intersection of cybersecurity and industrial application, we provide a foundation for further research. We look forward to promising research initiatives, projects, and directions that emerge based on our methodological work.}, language = {en} } @incollection{PassmannReinkerHasselmannetal.2016, author = {Passmann, Maximilian and Reinker, Felix and Hasselmann, Karsten and aus der Wiesche, Stefan and Joos, Franz}, title = {Development and Design of a Two-Stage Contraction Zone and Test Section of an Organic Rankine Cycle Wind Tunnel}, series = {ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition}, booktitle = {ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition}, isbn = {978-0-7918-4974-3}, doi = {10.1115/GT2016-56580}, pages = {V003T25A006}, year = {2016}, language = {en} } @misc{PassmannHasselmannReinkeretal.2015, author = {Passmann, Maximilian and Hasselmann, Karsten and Reinker, Felix and aus der Wiesche, Stefan}, title = {Thermal Expansion and Structural Behavior of a Closed Loop Thermal Wind Tunnel for ORC Fluids. Poster Session, ASME ORC 2015, Brussels, Belgium}, year = {2015}, language = {en} } @article{PassmannausderWieschePoveyetal.2021, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Povey, Thomas and Bergmann, Detlef}, title = {Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe}, series = {ASME Journal of Turbomachinery}, volume = {143}, journal = {ASME Journal of Turbomachinery}, number = {9}, pages = {091003 (9 pages)}, year = {2021}, language = {en} } @inproceedings{PassmannausderWieschePoveyetal.2020, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Povey, Thomas and Bergmann, Detlef}, title = {Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe}, series = {Proceedings ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21-25, 2020, Virtual, Online, GT2020-16074, V005T05A028; 12 pages}, booktitle = {Proceedings ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21-25, 2020, Virtual, Online, GT2020-16074, V005T05A028; 12 pages}, year = {2020}, language = {en} } @inproceedings{PassmannausderWiescheKenig2019, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Kenig, Eugeny Y.}, title = {On the Low and High Speed Flow of Gases Through Pillow Plate Channels}, series = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28-August 1, 2019, San Francisco, California, USA, AJKFluids2019-4933, V001T01A049; 9 pages}, booktitle = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28-August 1, 2019, San Francisco, California, USA, AJKFluids2019-4933, V001T01A049; 9 pages}, year = {2019}, language = {en} } @inproceedings{PassmannausderWiescheJoosetal.2018, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz and Willinger, Reinhard}, title = {The Physical Mechanism of Tip Leakage Loss Reduction by Means of Passive Injection in Low Mach Number Flows}, series = {Proceedings Turbo Expo 2018}, booktitle = {Proceedings Turbo Expo 2018}, address = {Oslo, Norwegen}, year = {2018}, language = {en} } @article{PassmannausderWiescheJoos2017, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz}, title = {A one-dimensional analytical calculation method for obtaining normal shock losses in supersonic real gas flows}, series = {Journal of Physics: Conference Series}, volume = {821}, journal = {Journal of Physics: Conference Series}, number = {1}, doi = {10.1088/1742-6596/8 21/1/01200 4}, year = {2017}, language = {en} } @article{PassmannausderWiescheJoos2021, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz}, title = {Numerical Calibration of Three-Dimensional Printed Five-Hole Probes for the Transonic Flow Regime}, series = {ASME Journal of Fluids Engineering}, volume = {143}, journal = {ASME Journal of Fluids Engineering}, number = {5}, pages = {051501 (12 pages)}, year = {2021}, language = {en} } @article{PassmannausderWiescheJoos2020, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz}, title = {Focusing schlieren visualization of transonic turbine tip-leakage flows}, series = {Int. J. Turbomachinery Propulsion Power}, volume = {5}, journal = {Int. J. Turbomachinery Propulsion Power}, number = {1}, doi = {10.3390/ijtpp5010001}, year = {2020}, language = {en} } @inproceedings{PassmannausderWiescheJoos2019, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz}, title = {Numerical Calibration of 3D Printed Five-Hole Probes for the Transonic Flow Regime}, series = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28-August 1, 2019, San Francisco, California, USA, AJKFluids2019-4706, V004T04A017; 11 pages}, booktitle = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28-August 1, 2019, San Francisco, California, USA, AJKFluids2019-4706, V004T04A017; 11 pages}, year = {2019}, language = {en} } @inproceedings{PassmannausderWiescheJoos2019, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz}, title = {Focusing schlieren visualization of transonic turbine tip-leakage flows}, series = {Proceedings ETC13}, booktitle = {Proceedings ETC13}, address = {Lausanne, Schweiz}, year = {2019}, language = {en} } @inproceedings{PassmannausderWiescheJoos2018, author = {Passmann, Maximilian and aus der Wiesche, Stefan and Joos, Franz}, title = {An Experimental and Numerical Study of Tip-Leakage Flows in an Idealized Turbine Tip Gap at High Mach Numbers}, series = {Proceedings Turbo Expo 2018}, booktitle = {Proceedings Turbo Expo 2018}, address = {Oslo, Norwegen}, year = {2018}, language = {en} } @incollection{PassmannausderWiesche2017, author = {Passmann, Maximilian and aus der Wiesche, Stefan}, title = {Development and Commissioning of a Supersonic Blow Down Wind Tunnel for Educational Purposes}, series = {Proceedings ASME 2017 Fluids Engineering Division Summer Meeting}, booktitle = {Proceedings ASME 2017 Fluids Engineering Division Summer Meeting}, address = {Waikoloa, Hawaii}, isbn = {978-0-7918-5808-0}, doi = {10.1115/FEDSM2017-69196}, pages = {V002T17A002}, year = {2017}, language = {en} } @incollection{PassmannausderWiesche2017, author = {Passmann, Maximilian and aus der Wiesche, Stefan}, title = {A Detailed Experimental and Numerical Investigation of Flow Structures in a Turbine Tip Gap With Passive Injection}, series = {Proceedings ASME 2017 Fluids Engineering Division Summer Meeting}, booktitle = {Proceedings ASME 2017 Fluids Engineering Division Summer Meeting}, address = {Waikoloa, Hawaii}, isbn = {978-0-7918-5804-2}, doi = {10.1115/FEDSM2017-69195}, pages = {V01AT03A012}, year = {2017}, language = {en} } @article{MulatzJantzen2013, author = {Mulatz, Reinhold and Jantzen, H.-A.}, title = {Preise f{\"u}r erfolgreiche Zusammenarbeit, technologietransfer, Seifriz Preis 2013}, series = {Handwerk magazin}, journal = {Handwerk magazin}, number = {11}, issn = {0942-8976}, pages = {20 -- 23}, year = {2013}, language = {de} } @inproceedings{MatarCinnellaGloerfeltetal.2022, author = {Matar, Camille and Cinnella, Paola and Gloerfelt, Xavier and Sundermeier, Stephan and Hake, Leander and aus der Wiesche, Stefan}, title = {Numerical investigation of the transonic nonideal gas flow around a circular cylinder at high Reynolds number}, series = {Proceedings 13th ERCOFTAC Workshop on Direct \& Large Eddy Simulation, 26-28 October 2022, Udine, Italy}, booktitle = {Proceedings 13th ERCOFTAC Workshop on Direct \& Large Eddy Simulation, 26-28 October 2022, Udine, Italy}, year = {2022}, language = {en} } @article{MatarCinnellaGloerfeltetal.2023, author = {Matar, Camille and Cinnella, Paola and Gloerfelt, Xavier and Reinker, Felix and aus der Wiesche, Stefan}, title = {Investigation of non-ideal gas flows around a circular cylinder}, series = {Energy}, volume = {Volume 268}, journal = {Energy}, number = {1 April 2023}, doi = {10.1016/j.energy.2022.126563}, year = {2023}, language = {en} } @article{KapitzTeigelerWagneretal.2018, author = {Kapitz, Marek and Teigeler, Christian and Wagner, Robert and Helcig, Christian and aus der Wiesche, Stefan}, title = {Experimental study of the influence of the Prandtl number on the convective heat transfer from a square cylinder}, series = {International Journal of Heat and Mass Transfer}, volume = {120}, journal = {International Journal of Heat and Mass Transfer}, doi = {10.1016/j.ijheatmasstransfer.2017.12.032}, pages = {471-480}, year = {2018}, language = {en} } @incollection{KapitzSchuetzEvaTelgenetal.2018, author = {Kapitz, Marek and Sch{\"u}tz, Franziska and Eva Telgen, and aus der Wiesche, Stefan}, title = {ROTATING MINISCUS DURING HELE-SHAW FLOW BOILING OFWATER UNDER SUBATMOSPHERIC PRESSURE WITH JET IMPINGEMENT}, series = {10th International Conference on Boiling and Condensation Heat Transfe r 12th-15th March 2018 in Nagasaki, Japan}, booktitle = {10th International Conference on Boiling and Condensation Heat Transfe r 12th-15th March 2018 in Nagasaki, Japan}, pages = {1 -- 2}, year = {2018}, language = {en} } @article{KapitzSchmiedinghoffLuelingetal.2019, author = {Kapitz, Marek and Schmiedinghoff, Lars and L{\"u}ling, Sammy Joe and aus der Wiesche, Stefan}, title = {Impact of surface parameters on confined boiling heat transfer in a Hele-Shaw cell}, series = {Heat and Mass Transfer}, volume = {55}, journal = {Heat and Mass Transfer}, doi = {10.1007/s00231-019-02604-2}, pages = {2533 -- 2544}, year = {2019}, language = {en} } @misc{KapitzReinkerausderWiescheetal.2014, author = {Kapitz, Marek and Reinker, Felix and aus der Wiesche, Stefan and Kenig, Eugeny and Gambaryan-Roisman, Tatiana and Stephan, Peter}, title = {Viskose Fingerbildung und der W{\"a}rme{\"u}bergang beim Blasensieden in einer Hele-Shaw Zelle, Jahrestreffen der Fachgruppen Mehrphasenstr{\"o}mungen und W{\"a}rme- und Stoff{\"u}bertragung, 24. - 25. M{\"a}rz 2014, Fulda}, year = {2014}, language = {de} } @incollection{KapitzReinkerausderWiesche2014, author = {Kapitz, Marek and Reinker, Felix and aus der Wiesche, Stefan}, title = {Viscous Fingering and Heat Transfer During Boiling in a Hele-Shaw Cell}, series = {Proceedings of the HEAT TRANSFER and FLUID FLOW in MICROSCALE (HTFFM-V)}, booktitle = {Proceedings of the HEAT TRANSFER and FLUID FLOW in MICROSCALE (HTFFM-V)}, address = {Marseille, FRA}, year = {2014}, language = {en} } @article{KapitzReinkerausderWiesche2015, author = {Kapitz, Marek and Reinker, Felix and aus der Wiesche, Stefan}, title = {Viscous fingering and heat transfer during boiling in a Hele-Shaw cell}, series = {Experimental Thermal Fluid Science}, volume = {67}, journal = {Experimental Thermal Fluid Science}, pages = {18 -- 23}, year = {2015}, language = {en} } @misc{KapitzBeckerausderWiesche2012, author = {Kapitz, Marek and Becker, Adam and aus der Wiesche, Stefan}, title = {Einfluss der thermophysikalischen Heizwandeigenschaften beim Beh{\"a}ltersieden mittels Diamant- und Siliciumcarbidheizern, Jahrestreffen der Fachgruppe W{\"a}rme- und Stoff{\"u}bertragung, 22. - 23. M{\"a}rz 2012, Weimar}, year = {2012}, language = {de} } @article{KapitzBeckerausderWiesche2014, author = {Kapitz, Marek and Becker, Adam and aus der Wiesche, Stefan}, title = {Influence of Thermophysical Wall Properties During Pool Boiling on Large Diamond and SiC Heaters}, series = {Heat Transfer Engineering}, volume = {35}, journal = {Heat Transfer Engineering}, number = {5}, pages = {472 -- 481}, year = {2014}, language = {en} } @incollection{KapitzBeckerausderWiesche2012, author = {Kapitz, Marek and Becker, Adam and aus der Wiesche, Stefan}, title = {Influence of thermophysical wall properties during pool boiling on large diamond and SiC heaters}, series = {Proceedings ECI 8th International Conference on Boiling and Condensation Heat Transfer}, booktitle = {Proceedings ECI 8th International Conference on Boiling and Condensation Heat Transfer}, address = {Lausanne, Switzerland}, year = {2012}, language = {en} } @incollection{KapitzBeckerausderWiesche2012, author = {Kapitz, Marek and Becker, Adam and aus der Wiesche, Stefan}, title = {Influence of Wall Thermal Conductivity during Pool Boiling on Diamond and SiC Heaters}, series = {Proceedings of the ASME 2012 Summer Heat Transfer Conference}, booktitle = {Proceedings of the ASME 2012 Summer Heat Transfer Conference}, address = {Puerto Rico}, pages = {HT2012 -- 58047}, year = {2012}, language = {en} } @article{KapitzausderWiescheKadicetal.2021, author = {Kapitz, Marek and aus der Wiesche, Stefan and Kadic, Samir and Strehle, Steffen}, title = {An experimental test of the Mocikat-Herwig theory of local turbulent heat transfer measurements on cold objects}, series = {Heat and Mass Transfer}, journal = {Heat and Mass Transfer}, doi = {10.1007/s00231-021-03158-y}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-142353}, year = {2021}, abstract = {Experimental results are presented of a test of the theory of local turbulent heat transfer measurements proposed by Mocikat and Herwig in 2007. A miniaturized multi-layer heat transfer sensor was developed and employed in this study. The new heat transfer sensor was designed to work in air and liquids, and this capability enabled the simultaneous investigation of different Prandtl numbers. Two basic configurations, namely the flow past a blunt plate and the flow past an inclined square cylinder, were investigated in test sections of wind and water tunnels. Convective heat transfer coefficients were obtained through conventional testing (i.e., employing thoroughly heated test objects) and using the new miniaturized sensor approach (i.e., utilizing cold test objects without heating). The main prediction of the Mocikat-Herwig theory that a specific thermal adjustment coefficient of the employed actual miniaturized heat transfer sensor should exist in the fully turbulent flow regime was proven for developed two-dimensional flow. The observed effect of the Prandtl number on this coefficient was in good agreement with the prediction of the asymptotic expansion method. The square cylinder results indicated the inherent limits of the local turbulent heat transfer measurement approach, as suggested by Mocikat and Herwig.}, language = {en} } @incollection{KapitzausderWiesche2015, author = {Kapitz, Marek and aus der Wiesche, Stefan}, title = {CONFINED BOILING HEAT TRANSFER, TWO-PHASE FLOW PATTERNS, AND JET IMPINGEMENT IN A HELE-SHAW CELL}, series = {Proceedings ECI 9th International Conference on Boiling and Condensation Heat Transfer}, booktitle = {Proceedings ECI 9th International Conference on Boiling and Condensation Heat Transfer}, address = {Boulder, CO}, year = {2015}, language = {en} } @misc{KapitzausderWiesche2014, author = {Kapitz, Marek and aus der Wiesche, Stefan}, title = {Rotating Liquid Jet during Boiling under Hele-Shaw Flow Conditions, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE2014), Montreal, Canada, Nov. 14-20, 2014}, year = {2014}, language = {en} } @misc{KapitzausderWiesche2015, author = {Kapitz, Marek and aus der Wiesche, Stefan}, title = {W{\"a}rme{\"u}bergang und Str{\"o}mungsformen in einer Hele-Shaw Siedezelle mittels Prallstrahl, Jahrestreffen der Fachgruppen Trocknungstechnik und W{\"a}rme- und Stoff{\"u}bertragung, 4. - 6. M{\"a}rz 2015, Leipzig}, year = {2015}, language = {de} } @article{KapitzausderWiesche2017, author = {Kapitz, Marek and aus der Wiesche, Stefan}, title = {Confined Boiling Heat Transfer, Two-Phase Flow Patterns, and Jet Impingement in a Hele-Shaw Cell}, series = {Heat Transfer Engineering}, volume = {38}, journal = {Heat Transfer Engineering}, number = {3}, pages = {290 -- 302}, year = {2017}, language = {en} } @article{KapitzausderWiesche2012, author = {Kapitz, Marek and aus der Wiesche, Stefan}, title = {The Effect of the Location of Nucleation Sites on the Thermal-Hydraulic Stability of a Short-Tube Natural Circulation Loop}, series = {Journal of Engineering for Gas Turbines and Power}, volume = {134}, journal = {Journal of Engineering for Gas Turbines and Power}, number = {6}, pages = {062901 -- 8}, year = {2012}, language = {en} } @article{JarkeSchuhBrecheretal.2018, author = {Jarke, Matthias and Schuh, G{\"u}nther and Brecher, Christian and Brockmann, Matthias and Prote, Jan-Phillip}, title = {Digital Shadows in the Internet of Production}, series = {ERCIM News 115 Special Theme: Digital Twins}, journal = {ERCIM News 115 Special Theme: Digital Twins}, year = {2018}, abstract = {Due to highly sophisticated, specialised models and data in production, digital twins, as defined as full digital representations, are neither computationally feasible nor useful. The complementary concept of digital shadows will provide cross-domain data access in real time by combining reduced engineering models and production data analytics.}, language = {en} } @inproceedings{JantzenAnnasElfringetal.2020, author = {Jantzen, Hans-Arno and Annas, Sven and Elfring, Michael and Scholz, J{\"u}rgen and Heller, Andreas and Janoschke, Uwe and Buntkiel, Lukas}, title = {R{\"u}hr-und Mischvorg{\"a}nge in Biogasanlagen: Potentiale und Erfolgschancen}, series = {Schriftenreihe Umweltingenieurwesen Band 95 Tagungsband universit{\"a}t Rostock}, booktitle = {Schriftenreihe Umweltingenieurwesen Band 95 Tagungsband universit{\"a}t Rostock}, editor = {Nelles, Prof. Dr. Michael}, publisher = {Universit{\"a}t Rostock}, address = {Rostock}, organization = {Universit{\"a}t Rostock}, isbn = {978-3-86009-507-2}, doi = {https://doi.org/10.18453/rosdok_id00002650}, pages = {185 -- 194}, year = {2020}, language = {de} } @book{JantzenWetter2015, author = {Jantzen, H.-A. and Wetter, Ch.}, title = {Abschlussbericht zum Forschungsvorhaben "Entwicklung neuer, effizienter Trocknersysteme zur energieoptimalen Trocknung von Biomasse-G{\"a}rresten mit Hilfe der numerischen Str{\"o}mungssimulation" 2012- 2014 gef{\"o}rdert durch das BMBF}, publisher = {TIB Uni Hannover}, pages = {123}, year = {2015}, language = {de} } @article{JantzenSchley2006, author = {Jantzen, H.-A. and Schley, St.}, title = {"Gut gek{\"u}hlt und gestochen scharf"}, series = {Wirtschaftsspiegel, Technologietransfer Wissenschaft-Wirtschaft}, journal = {Wirtschaftsspiegel, Technologietransfer Wissenschaft-Wirtschaft}, number = {11}, year = {2006}, language = {de} } @book{JantzenRinkerKrohneretal.2011, author = {Jantzen, H.-A. and Rinker, U. and Krohner, T. and Lux, J. and Tietmeyer, M.}, title = {"Neue Methoden zur theoretischen und experimentellen Untersuchung des Fließverhaltens metallischer Werkstoffe beim Zerspanungsprozess mit Hilfe der numerischen Str{\"o}mungssimulation (CFD)", Abschlussbericht zum FH ProfUnt-Projekt 2007-2010, Steinfurt}, year = {2011}, language = {de} } @misc{JantzenRinkerKrohneretal.2011, author = {Jantzen, H.-A. and Rinker, U. and Krohner, T. and Lux, J. and Tietmeyer, M.}, title = {"Neue Methoden zur Untersuchung des Fließverhaltens metallischer Werkstoffe beim Zerspanungsprozess mit Hilfe der numerischen Str{\"o}mungssimulation (CFD)"; Ergebnispr{\"a}sentation zum FH ProfUnt-Projekt gleichen Titels, Internationale ANSYS Anwendertagung , Kongresszentrum Stuttgart}, year = {2011}, language = {de} } @article{JantzenRinker2011, author = {Jantzen, H.-A. and Rinker, U.}, title = {"Neuer Berechnungsansatz zur Simulation von Zerspanungsvorg{\"a}ngen"}, series = {Ingenieurspiegel}, journal = {Ingenieurspiegel}, number = {3}, pages = {37 -- 38}, year = {2011}, language = {de} }