@article{OPUS4-2998,
  title     = {Schl{\"u}sseltechnologie f{\"u}r kleine und mittlere Unternehmen; Deutsch-niederl{\"a}ndisches Projekt als verl{\"a}ngerte Entwicklungsbank},
  series = {fhocus},
  journal   = {fhocus},
  number    = {16/2010},
  pages     = {24 -- 25},
  year      = {2010},
  language  = {de}
}
@article{OPUS4-3545,
  title     = {Innovatives Handwerk - Mit FH-Forschung sichert sich der Sonderanlagenhersteller M{\"u}nstermann einen Wettbewerbsvorsprung},
  series = {fh 16 Journal Lebendige Forschung an Fachhochschulen in NRW},
  journal   = {fh 16 Journal Lebendige Forschung an Fachhochschulen in NRW},
  number    = {1},
  pages     = {2},
  year      = {2010},
  language  = {de}
}
@article{OPUS4-3866,
  title     = {"Sparringspartner f{\"u}r den Mittelstand" VDI Forum Industrie Konkret},
  series = {Westf{\"a}lische Nachrichten 08.10.},
  journal   = {Westf{\"a}lische Nachrichten 08.10.},
  year      = {2011},
  language  = {de}
}
@misc{OPUS4-4073,
  title     = {Hannovermesse: Gemeinschaftsstand mit dem Labor f{\"u}r Hochfrequenztechnik auf dem Hochschulstand NRW - Pr{\"a}sentation DBU-Forschungsprojekt "Numerische Simulation der Umstr{\"o}mung von Testgeometrien zur Abschirmung von Sensoroptiken gegen Spritzwasserverschmutzung" 07.-12.04.},
  year      = {2003},
  language  = {de}
}
@misc{OPUS4-4072,
  title     = {WDR-Fernsehbericht zum Thema "Innovation in der Region": Pr{\"a}sentation einer erfolgreichen Industriekooperation des Str{\"o}mungstechnischen Simulationslabors mit den Hupfer Metallwerken Coesfeld. "Simulation und Optimierung des W{\"a}rmehaushaltes eines Teller-W{\"a}rmautomaten". 07.07.},
  year      = {2003},
  language  = {de}
}
@article{OPUS4-4040,
  title     = {"Rennflitzer schnell wie ein Pfeil"},
  series = {Westf{\"a}lische Nachrichten 18.03.},
  journal   = {Westf{\"a}lische Nachrichten 18.03.},
  year      = {2012},
  language  = {de}
}
@article{OPUS4-4041,
  title     = {"Spr{\"u}htrockner durch Simulation am Computer optimiert"},
  series = {Pressemitteiluungen FH M{\"u}nster 29.11.},
  journal   = {Pressemitteiluungen FH M{\"u}nster 29.11.},
  year      = {2011},
  language  = {de}
}
@article{OPUS4-4042,
  title     = {"Global Player mit lokaler Bodenhaftung"},
  series = {Wirtschaftsbild August},
  journal   = {Wirtschaftsbild August},
  year      = {2010},
  language  = {de}
}
@article{OPUS4-4043,
  title     = {"Mutige Unternehmen punkten auf den M{\"a}rkten der Zukunft"},
  series = {Wirtschaftsbild August},
  journal   = {Wirtschaftsbild August},
  year      = {2010},
  language  = {de}
}
@article{OPUS4-4044,
  title     = {"High-Tech aus der FH M{\"u}nster {\"u}berzeugt die Jury" - Renommierter Seifritz-Preis f{\"u}r Prof.Dr. Hans-Arno Jantzen},
  series = {Wirtschaft M{\"u}nsterland f{\"u}r den Kreis Steinfurt},
  journal   = {Wirtschaft M{\"u}nsterland f{\"u}r den Kreis Steinfurt},
  number    = {Okt/Nov/Dez},
  year      = {2009},
  language  = {de}
}
@article{OPUS4-4045,
  title     = {"Innovationskraft im Sonderanlagenbau"},
  series = {m{\"u}nstermann.contact},
  journal   = {m{\"u}nstermann.contact},
  number    = {Dezember},
  year      = {2009},
  language  = {de}
}
@article{OPUS4-4046,
  title     = {"Zwei Auszeichnungen f{\"u}r Steinfurt" FH Professoren erhalten Innovationspreis},
  series = {M{\"u}nsterl{\"a}ndische Volkszeitung 23.11.},
  journal   = {M{\"u}nsterl{\"a}ndische Volkszeitung 23.11.},
  year      = {2009},
  language  = {de}
}
@article{OPUS4-4047,
  title     = {"Frischer Wind in vielen Firmen - Kreative Unterenhmen der Region mit Innovationspreis M{\"u}nsterland ausgezeichnet},
  series = {Westf{\"a}lische Nachrichten 20.11.},
  journal   = {Westf{\"a}lische Nachrichten 20.11.},
  year      = {2009},
  language  = {de}
}
@article{OPUS4-4048,
  title     = {"Karbonfaser-Innovation" Seifritz-Preis an FH und M{\"u}nstermann},
  series = {Wirtschaftsspiegel},
  journal   = {Wirtschaftsspiegel},
  number    = {November},
  year      = {2009},
  language  = {de}
}
@article{OPUS4-4049,
  title     = {"Dem Airbus Fl{\"u}gel machen"},
  series = {Handwerk magazin},
  journal   = {Handwerk magazin},
  number    = {Okt},
  year      = {2009},
  language  = {mul}
}
@article{OPUS4-4050,
  title     = {"Die Kosten minimiert und die Leistung verbessert"},
  series = {M{\"u}nsterl{\"a}ndische Volkszeitung 06.10.},
  journal   = {M{\"u}nsterl{\"a}ndische Volkszeitung 06.10.},
  year      = {2009},
  language  = {de}
}
@article{OPUS4-4051,
  title     = {"Preis f{\"u}r Maschinenbauer" Prof.-Adalbert-Seifritz-Preis 2009},
  series = {Westf{\"a}lische Nachrichten 30.09.},
  journal   = {Westf{\"a}lische Nachrichten 30.09.},
  year      = {2009},
  language  = {de}
}
@book{OPUS4-15020,
  title     = {Handbuch Dampfturbinen},
  editor    = {aus der Wiesche, Stefan and Joos, Franz},
  publisher = {Springer Vieweg},
  address   = {Wiesbaden},
  doi       = {10.1007/978-3-658-20630-7},
  publisher      = {FH M{\"u}nster - University of Applied Sciences},
  year      = {2018},
  language  = {de}
}
@inproceedings{AlgharbawiHasselmannausderWiesche2019,
  author    = {Algharbawi, Almutaz ballah R and Hasselmann, Karsten and aus der Wiesche, Stefan},
  title     = {Thermodynamic Analysis of a Two-stage Organic Rankine Cycle with Ejector},
  series = {Proceedings 5th International Seminar on ORC Power Systems},
  booktitle = {Proceedings 5th International Seminar on ORC Power Systems},
  address   = {Athen, Griechenland},
  year      = {2019},
  language  = {en}
}
@misc{AnnasCzajkaJantzenetal.2017,
  author    = {Annas, S. and Czajka, H. and Jantzen, H.-A. and Janoske, U.},
  title     = {Influence of the viscosity and speed on the fluid flow of a paddle agitator International Symposium on Mixing in Industrial Processes IX 25-28th June 2017, Birmingham},
  year      = {2017},
  language  = {en}
}
@misc{AnnasElferingJantzenetal.2018,
  author    = {Annas, S. and Elfering, M. and Jantzen, H. and Scholz, J. and Janoske, U.},
  title     = {Einfluss scherverd{\"u}nnender Fluideigenschaften auf den R{\"u}hrprozess in Biogasanlagen ProcessNet Tagung M{\"u}nchen},
  year      = {2018},
  language  = {mul}
}
@incollection{AnnasElferingJantzenetal.2018,
  author    = {Annas, S. and Elfering, M. and Jantzen, H.-A. and Scholz, J. and Janoske, U.},
  title     = {Verbesserung des Mischprozesses von ger{\"u}hrten Biogasanlagen, 8. DGAW Kongress Wien},
  series = {Deutsche Gesellschaft f{\"u}r Abfallwirtschaft e.V. Tagungsband 8. Wissenschaftskongress Abfall- und Ressourcenwirtschaft},
  booktitle = {Deutsche Gesellschaft f{\"u}r Abfallwirtschaft e.V. Tagungsband 8. Wissenschaftskongress Abfall- und Ressourcenwirtschaft},
  edition   = {1},
  publisher = {innsbruck university press},
  address   = {Wien},
  isbn      = {978-3-903187-10-8},
  pages     = {55 -- 59},
  year      = {2018},
  language  = {de}
}
@misc{AnnasElferingJantzenetal.2018,
  author    = {Annas, S. and Elfering, M. and Jantzen, H.-A. and Scholz, J. and Janoske, U.},
  title     = {„Analysis and improvement of the mixing process in biogas plants: Poster presented at MIXING16 conference", Toulouse, ((09.-12.09.2018)},
  year      = {2018},
  language  = {en}
}
@article{AnnasJantzenScjolzetal.2018,
  author    = {Annas, S. and Jantzen, H.-A. and Scjolz, J. and Janoschke, U.},
  title     = {A Scale-up Strategy for the Fluid Flow in Biogas Plants},
  series = {Chemical Engineering \& Technology},
  journal   = {Chemical Engineering \& Technology},
  number    = {3},
  issn      = {1521-4125},
  year      = {2018},
  language  = {en}
}
@misc{AnnasElferingJantzenetal.2019,
  author    = {Annas, Sven and Elfering, Michael and Jantzen, Hans-Arno and Scholz, J{\"u}rgen and Janoschke, U.},
  title     = {Analyse zeitlich aufgel{\"o}ster Stromfelder in Mischregimen mit nicht-Newtonschen Fluiden},
  year      = {2019},
  language  = {de}
}
@article{AnnasJantzen2019,
  author    = {Annas, Sven and Jantzen, Hans-Arno},
  title     = {Auf der Suche nach dem optimalen R{\"u}hrwerk},
  series = {e.l.b.W Umwelttechnik Wien},
  volume    = {2019},
  journal   = {e.l.b.W Umwelttechnik Wien},
  number    = {M{\"a}rz},
  editor    = {Charlfi, Walltraud},
  pages     = {36 -- 37},
  year      = {2019},
  language  = {de}
}
@article{AnnasJantzenJanoschkeetal.2019,
  author    = {Annas, Sven and Jantzen, Hans-Arno and Janoschke, Uwe and Scholz, J{\"u}rgen and Elfering, Michael and Volbert, Nico},
  title     = {Einfluss der R{\"u}hrwerksposition auf den Mischprozess in Biogasanlagen anhand eines Paddelr{\"u}hrwerks},
  series = {CIT Chemie Ingenieur Technik},
  volume    = {2019},
  journal   = {CIT Chemie Ingenieur Technik},
  number    = {7},
  doi       = {10.1002/cite.201800116},
  pages     = {1 -- 12},
  year      = {2019},
  language  = {de}
}
@techreport{AnnasJantzenScholzetal.2019,
  author    = {Annas, Sven and Jantzen, Hans-Arno and Scholz, J{\"u}rgen and Gl{\"o}sek{\"o}tter, Peter and Wetter, Christof},
  title     = {Vorhabensbezeichnung: IngenieurNachwuchs2014: Ein neues Entwicklungswerkzeug f{\"u}r die Optimierung von R{\"u}hrsystemen in Biogas-Fermentern unter Einsatz der Wireless Sensor Networks (WSN)-Technik in Kombination mit CFD : Schlussbericht : Berichtszeitraum: 01.11.2014 bis 31.12.2018},
  doi       = {10.2314/KXP:1672326753},
  pages     = {103},
  year      = {2019},
  language  = {de}
}
@article{AugspurgerKlockeDoebbeleretal.2017,
  author    = {Augspurger, Thorsten and Klocke, Fritz and D{\"o}bbeler, Benjamin and Brockmann, Matthias and Gierlings, Sascha and Lima, Adriana},
  title     = {Modeling of Transient Thermal Conditions in Cutting},
  series = {Journal of Mechanics in Engineering and Automation},
  journal   = {Journal of Mechanics in Engineering and Automation},
  number    = {7-1},
  doi       = {10.17265/2159-5275/2017.03.001},
  pages     = {113 -- 120},
  year      = {2017},
  abstract  = {The thermal conditions like the temperature distribution and the heat fluxes during metal cutting have a major influence on the machinability, the tool lifetime, the metallurgical structure and thus the functionality of the work piece. This in particular applies for manufacturing processes like milling, drilling and turning for high-value turbomachinery components like impellers, combustion engines and compressors of the aerospace and automotive industry as well as energy generation, which play a major role in modern societies. However, numerous analytical and experimental efforts have been conducted in order to understand the thermal conditions in metal cutting, yet many questions still prevail. Most models are based on a stationary point of view and do not include time dependent effects like in intensity and distribution varying heat sources, varying engagement conditions and progressive tool wear. In order to cover such transient physics an analytical approach based on Green's functions for the solution of the partial differential equations of unsteady heat conduction in solids is used to model entire transient temperature fields. The validation of the model is carried out in orthogonal cutting experiments not only punctually but also for entire temperature fields. For these experiments an integrated measurement of prevailing cutting force and temperature fields in the tool and the chip by means of high-speed thermography were applied. The thermal images were analyzed with regard to thermodynamic energy balancing in order to derive the heat partition between tool, chips and workpiece. The thus calculated heat flow into the tool was subsequently used in order to analytically model the transient volumetric temperature fields in the tool. The described methodology enables the modeling of the transient thermal state in the cutting zone and particular in the tool, which is directly linked to phenomena like tool wear and workpiece surface modifications.},
  language  = {en}
}
@article{ausderWiesche2012,
  author    = {aus der Wiesche, Stefan},
  title     = {A Mobile Test Rig for Micro Gas Turbines Based on a Thermal Power Measurement Approach},
  series = {ASME Journal for Engineering of Gas Turbines and Power},
  volume    = {134},
  journal   = {ASME Journal for Engineering of Gas Turbines and Power},
  doi       = {10.1115/1.4007201},
  year      = {2012},
  language  = {en}
}
@incollection{ausderWiesche2012,
  author    = {aus der Wiesche, Stefan},
  title     = {A Mobile Test Rig for Micro Gas Turbines Based on a Thermal Power Measurement Approach},
  series = {Proceedings of the ASME Turbo Expo},
  booktitle = {Proceedings of the ASME Turbo Expo},
  address   = {Copenhagen, Denmark},
  year      = {2012},
  language  = {en}
}
@inproceedings{ausderWiesche2019,
  author    = {aus der Wiesche, Stefan},
  title     = {Stagnation Flow and Heat Transfer From a Finite Disk Situated Perpendicular to a Uniform Stream},
  series = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference 2019, San Francisco, California, USA, AJKFluids2019-4610, V001T01A027; 13 pages},
  booktitle = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference 2019, San Francisco, California, USA, AJKFluids2019-4610, V001T01A027; 13 pages},
  year      = {2019},
  language  = {en}
}
@article{ausderWiesche2020,
  author    = {aus der Wiesche, Stefan},
  title     = {Stagnation Flow and Heat Transfer From a Finite Disk Situated Perpendicular to a Uniform Stream},
  series = {ASME Journal of Fluids Engineering},
  volume    = {142},
  journal   = {ASME Journal of Fluids Engineering},
  number    = {3},
  pages     = {031108 (15 pages)},
  year      = {2020},
  language  = {en}
}
@inproceedings{ausderWiesche2020,
  author    = {aus der Wiesche, Stefan},
  title     = {A Simplified Model for Predicting Natural Draft Wet Cooling Tower Performance of Large Steam Power Plants},
  series = {Proceedings ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21-25, 2020, Virtual, Online, GT2020-15369, V009T23A020, 12 pages},
  booktitle = {Proceedings ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21-25, 2020, Virtual, Online, GT2020-15369, V009T23A020, 12 pages},
  year      = {2020},
  language  = {en}
}
@incollection{ausderWiesche2018,
  author    = {aus der Wiesche, Stefan},
  title     = {Heat Transfer in Rotating Flows},
  series = {Handbook of Thermal Science and Engineering. Ed. Francis A. Kulacki},
  booktitle = {Handbook of Thermal Science and Engineering. Ed. Francis A. Kulacki},
  publisher = {Springer},
  address   = {New York},
  publisher      = {FH M{\"u}nster - University of Applied Sciences},
  pages     = {647 -- 690},
  year      = {2018},
  language  = {en}
}
@article{ausderWiesche2007,
  author    = {aus der Wiesche, Stefan},
  title     = {The Cauchy surface wave problem from the viewpoint of a VOF method},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {141 -- 152},
  year      = {2007},
  language  = {en}
}
@article{ausderWiesche2007,
  author    = {aus der Wiesche, Stefan},
  title     = {Heat transfer from a rotating disk in a parallel air crossflow},
  series = {International Journal of Thermal Science},
  journal   = {International Journal of Thermal Science},
  pages     = {745 -- 754},
  year      = {2007},
  language  = {en}
}
@article{ausderWiesche2007,
  author    = {aus der Wiesche, Stefan},
  title     = {Large-eddy-simulation study of an air flow past a heated square cylinder},
  series = {Heat and Mass Transfer},
  journal   = {Heat and Mass Transfer},
  pages     = {515 -- 525},
  year      = {2007},
  language  = {en}
}
@article{ausderWiesche2007,
  author    = {aus der Wiesche, Stefan},
  title     = {Numerical heat transfer and thermal engineering of AdBlue (SCR) tanks for combustion engine emission reduction},
  series = {Applied Thermal Engineering},
  journal   = {Applied Thermal Engineering},
  pages     = {1790 -- 1798},
  year      = {2007},
  language  = {en}
}
@inproceedings{ausderWiesche2010,
  author    = {aus der Wiesche, Stefan},
  title     = {Heat transfer from rotating discs with finite thickness subjected to outer air streams},
  series = {Proceedings 14th International Heat Transfer Conference, Washington D. C.},
  booktitle = {Proceedings 14th International Heat Transfer Conference, Washington D. C.},
  year      = {2010},
  language  = {en}
}
@article{ausderWiesche2008,
  author    = {aus der Wiesche, Stefan},
  title     = {Sloshing dynamics of a viscous liquid in a spinning horizontal cylinder tank},
  series = {Journal of Aerospace Science and Technology},
  journal   = {Journal of Aerospace Science and Technology},
  pages     = {448 -- 456},
  year      = {2008},
  language  = {en}
}
@article{ausderWiesche2008,
  author    = {aus der Wiesche, Stefan},
  title     = {The collapse of micro cavitation bubbles},
  series = {Forschung im Ingenieurwesen},
  journal   = {Forschung im Ingenieurwesen},
  pages     = {175 -- 182},
  year      = {2008},
  language  = {en}
}
@article{ausderWiesche2023,
  author    = {aus der Wiesche, Stefan},
  title     = {Experimental Investigation Techniques for Non-Ideal Compressible Fluid Dynamics},
  series = {Int. J. Turbomach. Propuls. Power 2023, 8(2), 11},
  volume    = {8},
  journal   = {Int. J. Turbomach. Propuls. Power 2023, 8(2), 11},
  number    = {2},
  doi       = {10.3390/ijtpp8020011},
  year      = {2023},
  language  = {en}
}
@incollection{ausderWiescheAhlders2015,
  author    = {aus der Wiesche, Stefan and Ahlders, Peter},
  title     = {Experimental and Numerical Investigation of Thermal Mixing Behavior Under Slosh Motion},
  series = {Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference},
  booktitle = {Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference},
  address   = {Seoul, Korea},
  year      = {2015},
  language  = {en}
}
@article{ausderWiescheBardasUhkoetter2011,
  author    = {aus der Wiesche, Stefan and Bardas, Ufuk and Uhkoetter, Stephan},
  title     = {Boiling heat transfer on large diamond and SiC heaters: The influence of thermal wall properties},
  series = {International Journal of Heat and Mass Transfer},
  volume    = {54},
  journal   = {International Journal of Heat and Mass Transfer},
  pages     = {1886 -- 1895},
  year      = {2011},
  language  = {en}
}
@book{ausderWiescheHelcig2015,
  author    = {aus der Wiesche, Stefan and Helcig, Christian},
  title     = {Convective Heat Transfer From Rotating Disks Subjected To Streams Of Air},
  edition   = {1st ed. 2016},
  publisher = {Springer Cham Heidelberg New York Dordrecht London},
  isbn      = {978-3-319-20167-2},
  doi       = {10.1007/978-3-319-20167-2},
  year      = {2015},
  language  = {en}
}
@incollection{ausderWiescheKapitz2015,
  author    = {aus der Wiesche, Stefan and Kapitz, Marek},
  title     = {Effects of Pipe Inclination on Void Fraction of Two-Phase Gas Liquid Flow},
  series = {Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference},
  booktitle = {Proceedings of ASME-JSME-KSME Joint Fluids Engineering Conference},
  address   = {Seoul, Korea},
  year      = {2015},
  language  = {en}
}
@inproceedings{ausderWieschePassmann2018,
  author    = {aus der Wiesche, Stefan and Passmann, Maximilian},
  title     = {Analysis of Steam Turbine Blade Tip Excitation Forces by Means of Computational Fluid Dynamics and Experimental Cascade Results},
  series = {Proceedings Turbo Expo 2018},
  booktitle = {Proceedings Turbo Expo 2018},
  address   = {Oslo, Norwegen},
  year      = {2018},
  language  = {en}
}
@incollection{ausderWieschePassmannWillinger2015,
  author    = {aus der Wiesche, Stefan and Passmann, Maximilian and Willinger, Reinhard},
  title     = {Reduction of Turbine Blade Tip Leakage Losses and Excitation Forces by Passive Tip Injection},
  series = {Proceedings of the ASME 2015 International Mechanical Engineering Congress \& Exhibition},
  booktitle = {Proceedings of the ASME 2015 International Mechanical Engineering Congress \& Exhibition},
  address   = {Houston, Texas, USA},
  year      = {2015},
  language  = {en}
}
@inproceedings{ausderWiescheReinker2021,
  author    = {aus der Wiesche, Stefan and Reinker, Felix},
  title     = {Dimensional analysis and performance laws for organic vapor flow turbomachinery},
  series = {Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, M{\"u}nchen},
  booktitle = {Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, M{\"u}nchen},
  year      = {2021},
  language  = {en}
}
@article{ausderWiescheReinker2022,
  author    = {aus der Wiesche, Stefan and Reinker, Felix},
  title     = {Dimensional analysis and performance laws for organic vapor flow turbomachinery},
  series = {Energy},
  volume    = {257},
  journal   = {Energy},
  number    = {15 October 2022},
  doi       = {10.1016/j.energy.2022.124635},
  year      = {2022},
  language  = {en}
}
@inproceedings{ausderWiescheReinkerWagneretal.2019,
  author    = {aus der Wiesche, Stefan and Reinker, Felix and Wagner, Robert and Epple, Philipp and Fritsche, Manuel and Russwurm, Hans J{\"o}rg},
  title     = {An Accurate Thermal Measurement Approach for Determining Fan Efficiencies Based on System Identification},
  series = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28-August 1, 2019, San Francisco, California, USA, AJKFluids2019-4613, V03AT03A014; 10 pages},
  booktitle = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28-August 1, 2019, San Francisco, California, USA, AJKFluids2019-4613, V03AT03A014; 10 pages},
  year      = {2019},
  language  = {en}
}
@inproceedings{ausderWiescheReinkerWagneretal.2021,
  author    = {aus der Wiesche, Stefan and Reinker, Felix and Wagner, Robert and Hake, Leander and Passmann, Maximilian},
  title     = {Critical and Choking Mach Numbers for Organic Vapor Flows Through Turbine Cascades},
  series = {Proceedings ASME Turbo Expo, virtual conference 7.-11.6.2021, Paper No. GT2021-59013},
  booktitle = {Proceedings ASME Turbo Expo, virtual conference 7.-11.6.2021, Paper No. GT2021-59013},
  doi       = {10.1115/GT2021-59013},
  year      = {2021},
  language  = {en}
}
@misc{ausderWiescheWagnerHelcig2017,
  author    = {aus der Wiesche, Stefan and Wagner, Robert and Helcig, Christian},
  title     = {Konvektionstrocknung unter Ausnutzung von transitionalen Abl{\"o}seblasen, Jahrestreffen der ProcessNet-Fachgruppen Agglomerations- und Sch{\"u}ttguttechnik, grenzfl{\"a}chenbestimmte Systeme und Prozesse, Trocknungstechnik, Lebensmittelverfahrenstechnik und W{\"a}rme- und Stoff{\"u}bertragung},
  year      = {2017},
  language  = {de}
}
@incollection{ausderWiescheWulffReinkeretal.2014,
  author    = {aus der Wiesche, Stefan and Wulff, Steffen and Reinker, Felix and Hasselmann, Karsten},
  title     = {Development of a Cost-Efficient Test Rig for Turbine Loss Education},
  series = {Proceedings of ASME 2014 4th Joint US-European Fluids Engineering Division},
  booktitle = {Proceedings of ASME 2014 4th Joint US-European Fluids Engineering Division},
  address   = {Chicago, Illinois, USA},
  isbn      = {978-0-7918-4621-6},
  year      = {2014},
  language  = {en}
}
@misc{BardasUhkoetterausderWiesche2010,
  author    = {Bardas, Ufuk and Uhk{\"o}tter, Stephan and aus der Wiesche, Stefan},
  title     = {Blasensieden an makroskopischen Diamant-Heizfl{\"a}chen im Vergleich zu Saphir-, SiC- und konventionellen Heizfl{\"a}chen, Jahrestreffen der ProcessNet-Fachaussch{\"u}sse Computational Fluid Dynamics und W{\"a}rme- und Stoff{\"u}bertragung, Hamburg},
  year      = {2010},
  language  = {de}
}
@misc{BeckerKapitzausderWiesche2012,
  author    = {Becker, Adam and Kapitz, Marek and aus der Wiesche, Stefan},
  title     = {Numerische Simulation der Blasendynamik an Heizw{\"a}nden, Jahrestreffen der Fachgruppe W{\"a}rme- und Stoff{\"u}bertragung, 22. - 23. M{\"a}rz 2012 Weimar},
  year      = {2012},
  language  = {de}
}
@article{BeckerKapitzausderWiesche2014,
  author    = {Becker, Adam and Kapitz, Marek and aus der Wiesche, Stefan},
  title     = {Numerical Simulation of Single Bubble Dynamics During Flow Boiling Conditions on a Horizontal Surface},
  series = {Heat Transfer Engineering},
  volume    = {35},
  journal   = {Heat Transfer Engineering},
  number    = {5},
  pages     = {461 -- 471},
  year      = {2014},
  language  = {en}
}
@incollection{BeckerKapitzausderWiesche2012,
  author    = {Becker, Adam and Kapitz, Marek and aus der Wiesche, Stefan},
  title     = {Numerical Simulation of Single Bubble Dynamics During Flow Boiling Conditions on a Horizontal Surface},
  series = {Proceedings ECI 8th International Conference on Boiling and Condensation Heat Transfer},
  booktitle = {Proceedings ECI 8th International Conference on Boiling and Condensation Heat Transfer},
  address   = {Lausanne, Switzerland},
  year      = {2012},
  language  = {en}
}
@incollection{BeckerKapitzausderWiesche2012,
  author    = {Becker, Adam and Kapitz, Marek and aus der Wiesche, Stefan},
  title     = {Numerical simulation of single bubble dynamics during pool and flow boiling conditions},
  series = {Proceedings of the ASME 2012 Summer Heat Transfer Conference},
  booktitle = {Proceedings of the ASME 2012 Summer Heat Transfer Conference},
  address   = {Puerto Rico},
  pages     = {HT2012 -- 58089},
  year      = {2012},
  language  = {en}
}
@incollection{BeckerBrockmannNiemietzetal.2021,
  author    = {Becker, Marco and Brockmann, Matthias and Niemietz, Philipp and Trauth, Daniel and Bergs, Thomas and Brecher, Christian},
  title     = {Das Internet of Production als Fundament der Datenverwertung in der Produktion},
  series = {Monetarisierung von technischen Daten / Hrsg. Daniel Trauth, Thomas Bergs, Wolfgang Prinz},
  booktitle = {Monetarisierung von technischen Daten / Hrsg. Daniel Trauth, Thomas Bergs, Wolfgang Prinz},
  editor    = {Trauth, Daniel and Bergs, Thomas and Prinz, Wolfgang},
  publisher = {Springer Vieweg},
  address   = {Berlin, Heidelberg},
  doi       = {10.1007/978-3-662-62915-4_15},
  publisher      = {FH M{\"u}nster - University of Applied Sciences},
  pages     = {275 -- 295},
  year      = {2021},
  abstract  = {Das Internet of Things entfaltet erst durch die {\"U}berwindung von bestehenden Produkt- und Industriegrenzen sein volles {\"o}konomisches Potenzial. Trotzdem werden Cyberphysische Systeme in der Forschung bisher oftmals isoliert betrachtet. Der Begriff des Internet of Production (IoP) steht f{\"u}r die Vision eines {\"u}bergreifenden Austauschs von Daten und Informationen zwischen Produktentwicklung, Produktion und Nutzungsphase - {\"u}ber bestehende Organisationsgrenzen hinaus. Die Realisierung des IoP ist mit Herausforderungen im Bereich der datengetriebenen Modellierung sowie der Infrastruktur verbunden. In diesem Buchbeitrag werden die bestehenden Herausforderungen erl{\"a}utert und L{\"o}sungsans{\"a}tze skizziert. Der Schwerpunkt liegt auf der datengetriebenen Modellierung. Im Speziellen wird die Problematik des Lernens von kausalen Zusammenh{\"a}ngen, die Interpretierbarkeit von Machine-Learning-Modellen sowie die Integration von Dom{\"a}nenwissen in Lernalgorithmen diskutiert. Abschließend werden zwei Anwendungsbeispiele des „Digital Material Shadows" vorgestellt. Diese veranschaulichen wie mithilfe von Machine Learning Erkenntnisse {\"u}ber den Materialzustand eines Werkst{\"u}cks gewonnen werden k{\"o}nnen. Ziel dieser Digital Material Shadows ist es, langfristig Fertigungsprozesse adaptiv an die individuellen Materialeigenschaften des vorliegenden Werkst{\"u}cks bzw. Rohmaterials anzupassen.},
  language  = {de}
}
@book{Beumler1980,
  author    = {Beumler, Harald},
  title     = {Die Diplomarbeit},
  edition   = {1. Aufl.},
  publisher = {Selbstverl.},
  address   = {Sch{\"o}ppingen},
  pages     = {VI, 89 S.},
  year      = {1980},
  language  = {de}
}
@inproceedings{BiennerCinnellaGloerfeltetal.2022,
  author    = {Bienner, Aur{\´e}lien and Cinnella, Paola and Gloerfelt, Xavier and Hake, Leander and aus der Wiesche, Stefan and Strehle, Steffen},
  title     = {STUDY OF BYPASS TRANSITION IN DENSE-GAS BOUNDARY LAYERS},
  series = {Proceedings 12th International Symposium on Turbulence and Shear Flow Phenomena (TSFP12) Osaka, Japan (Online), July 19-22, 2022},
  booktitle = {Proceedings 12th International Symposium on Turbulence and Shear Flow Phenomena (TSFP12) Osaka, Japan (Online), July 19-22, 2022},
  year      = {2022},
  language  = {en}
}
@inproceedings{BiennerGloerfeltCinnellaetal.2023,
  author    = {Bienner, Aur{\´e}lien and Gloerfelt, Xavier and Cinnella, Paola and Hake, Leander and aus der Wiesche, Stefan},
  title     = {Numerical investigation of a transonic dense gas flow over an idealized blade vane configuration},
  series = {Proceedings ORC 2023, Sevilla, 4. - 6. September 2023, Spanien},
  booktitle = {Proceedings ORC 2023, Sevilla, 4. - 6. September 2023, Spanien},
  year      = {2023},
  language  = {en}
}
@incollection{BrecherBrockmann2020,
  author    = {Brecher, Christian and Brockmann, Matthias},
  title     = {Vernetzte Produktion durch Digitale Schatten - Werkzeugmaschine 4.0},
  series = {Handbuch Industrie 4.0: Recht, Technik, Gesellschaft / Hrsg. Walter Frenz},
  booktitle = {Handbuch Industrie 4.0: Recht, Technik, Gesellschaft / Hrsg. Walter Frenz},
  publisher = {Springer-Verlag GmbH Deutschland},
  address   = {Berlin, Heidelberg},
  doi       = {10.1007/978-3-662-58474-3},
  publisher      = {FH M{\"u}nster - University of Applied Sciences},
  pages     = {543 -- 552},
  year      = {2020},
  abstract  = {Der Begriff Internet of Things hat sich weltweit als Bezeichnung f{\"u}r die horizontale internetbasierte Vernetzung von Cyber-Physical Systems durchgesetzt. Das IoT erm{\"o}glicht dabei die Nutzung von Felddaten (z. B. Kundenverhalten) zur Realisierung von neuartigen digitalen Gesch{\"a}ftsmodellen. In den meisten Anwendungsf{\"a}llen sind dabei große Mengen an Felddaten vorhanden, welche durch eine relativ kleine Anzahl von Parametern beschrieben werden. Die {\"U}bertragung des IoT-Ansatzes auf die Produktion wird - insbesondere in Deutschland - mit dem Begriff Industrie 4.0 bezeichnet. Das volle Potenzial dieses Ansatzes kann derzeit jedoch nicht vollst{\"a}ndig genutzt werden, da der Zugang zu Daten aus der Produktion aus verschiedenen Gr{\"u}nden nicht m{\"o}glich ist und die Daten aufgrund der komplexen physikalischen Wirkzusammenh{\"a}nge sehr heterogen sind. Dies f{\"u}hrt insbesondere in der Datenanalyse zu g{\"a}nzlich neuen Herausforderungen.},
  language  = {de}
}
@inproceedings{BrecherBrockmannBiernatetal.2020,
  author    = {Brecher, Christian and Brockmann, Matthias and Biernat, Benedikt and Frenkel, Nils and Neus, Stephan},
  title     = {Modellbasierte Datenanalyse als Basis f{\"u}r Zustands{\"u}berwachung in Werkzeugmaschinen},
  series = {Steel and more : ASK 34 : Aachener Stahlkolloquium : 19. November 2020 : Online-Konferenz : Tagungsband},
  booktitle = {Steel and more : ASK 34 : Aachener Stahlkolloquium : 19. November 2020 : Online-Konferenz : Tagungsband},
  editor    = {Krupp, Ulrich and M{\"u}nstermann, Sebastian},
  publisher = {DVS Media GmbH},
  address   = {D{\"u}sseldorf},
  isbn      = {3-96144-092-1},
  pages     = {9 -- 18},
  year      = {2020},
  abstract  = {Moderne Produktions- und Verarbeitungsanlagen in der Stahlherstellung beinhalten eine Vielzahl von Sensoriken und digitalisierten Informationen. Prinzipiell stehen daher bereits w{\"a}hrend des Betriebes große Datenmengen entlang des gesamten Herstellungsprozess zur Verf{\"u}gung. Diese Daten werden teilweise direkt f{\"u}r interne Regelungen der Maschinen oder f{\"u}r Qualit{\"a}tskontrollen genutzt. Ein Großteil dieser Daten bleibt jedoch ungenutzt. Dies hat zwei Hauptgr{\"u}nde: Zum einen m{\"u}ssten sehr große Datenmengen gespeichert werden, zum anderen sind die erzeugten Daten sehr heterogen und ohne Vorverarbeitung und Kenntnis der physikalischen Wirkzusammenh{\"a}nge von keinem direktem Nutzen. Der Verkn{\"u}pfung von relevantem Wissen, Modellen und Daten {\"u}ber alle relevanten technischen Dom{\"a}nen hinweg bietet die M{\"o}glichkeit den OEE zu optimieren. Ein dom{\"a}nen{\"u}bergreifender Datenzugriff erm{\"o}glicht neue M{\"o}glichkeiten f{\"u}r produzierende Unternehmen, insbesondere m{\"u}ssen mit Wissen aufbereitete Daten zusammen mit bedarfsgerecht reduzierten Modellen genutzt werden. Diese modellbasierte Datenanalyse stellt die Grundlage f{\"u}r einen optimalen Nutzen von Daten aus der Produktion dar.},
  language  = {de}
}
@article{BrecherOezdemirBrockmann2017,
  author    = {Brecher, Christian and {\"O}zdemir, Denis and Brockmann, Matthias},
  title     = {Integrative Production Technology},
  series = {Production Engineering - Research and Development},
  volume    = {2017},
  journal   = {Production Engineering - Research and Development},
  number    = {11},
  doi       = {10.1007/s11740-017-0730-y},
  pages     = {93 -- 95},
  year      = {2017},
  abstract  = {Production technology is a highly interdisciplinary field of research. It comprises different production domains (cutting, welding, forming, assembly, etc.), industry-sectors, materials and scales. Moreover, production has strong interdependencies with other scientific disciplines such as product development, materials engineering, business economics, information and communication technology, social science and natural science. Integrative Production Technology aims to develop a deep technology spanning perception to offer products matching customer and societal demands at competitive prices and to quickly adapt to market and societal changes while assuring constant and predictable product properties. The Cluster of Excellence (CoE) "Integrative Production Technology for High-Wage Countries" has initiated this special issue to present some of the newest results in the field.},
  language  = {en}
}
@article{Brockmann2022,
  author    = {Brockmann, Matthias},
  title     = {Warum digitale Transformation und Nachhaltigkeit sich gegenseitig bedingen},
  series = {VDMA Magazin "Digitale Transformation"},
  journal   = {VDMA Magazin "Digitale Transformation"},
  pages     = {18 -- 24},
  year      = {2022},
  abstract  = {Nachhaltig, menschzentriert und resilient - so beschreibt die Europ{\"a}ische Kommission in einem ihrer Dossiers die n{\"a}chste industrielle Revolution unter dem Stichwort Industrie 5.0. Vor zehn Jahren wurde auf der Hannover Messe 2011 die Vision Industrie 4.0 pr{\"a}sentiert. Kernelemente von Industrie 4.0 sind eine Referenzarchitektur (RAMI 4.0) zur Vernetzung zunehmend autonomer IoT-Ger{\"a}te sowie Cyber-Physical Production Systems (CPPS), bei denen hochaufgel{\"o}ste Simulationen („Digital Twins") dabei helfen, physische Produktionssysteme zu {\"u}berwachen, deren Verhalten vorherzusagen und zu regeln. Dar{\"u}ber hinaus sollen personalisierte und kontextspezifische „intelligente Agenten" und dazugeh{\"o}rige Organisationsformen neue Formen der Arbeit schaffen.},
  language  = {de}
}
@misc{BrockmannKroeger2021,
  author    = {Brockmann, Matthias and Kr{\"o}ger, Moritz},
  title     = {Entering the World of Internet of Production - Get Rid of the Not-Invented-Here-Syndrome and Start Making Software Components Foolproof!},
  year      = {2021},
  language  = {en}
}
@inproceedings{BuntkielBudelmannHelleretal.2021,
  author    = {Buntkiel, Lukas and Budelmann, Christoph and Heller, Andreas and Annas, Sven and Reinecke, Sebastian and Hampel, Uwe},
  title     = {Ein „Wireless Sensor Network" zur Prozesscharakterisierung in Biogasfermentern},
  series = {Biogas in der Landwirtschaft / KTBL (Hg.)},
  booktitle = {Biogas in der Landwirtschaft / KTBL (Hg.)},
  isbn      = {978-3-945088-83-8},
  pages     = {221 -- 223},
  year      = {2021},
  language  = {de}
}
@article{CatiausderWiescheDuezguen2022,
  author    = {Cati, Yusuf and aus der Wiesche, Stefan and D{\"u}zg{\"u}n, Mesut},
  title     = {Numerical Model of the Railway Brake Disk for the Temperature and Axial Thermal Stress Analyses},
  series = {ASME Journal of Thermal Science and Engineering Applications},
  volume    = {14},
  journal   = {ASME Journal of Thermal Science and Engineering Applications},
  number    = {10},
  doi       = {10.1115/1.4054213},
  year      = {2022},
  language  = {en}
}
@inproceedings{CinellaMatarGloerfeltetal.2021,
  author    = {Cinella, Paola and Matar, Camille and Gloerfelt, Xavier and Reinker, Felix and aus der Wiesche, Stefan},
  title     = {Subsonic organic vapor flow past a circular cylinder},
  series = {Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, M{\"u}nchen},
  booktitle = {Proceedings 6th International Seminar on ORC Power Systems ORC2021, October 11.-13.2021, M{\"u}nchen},
  year      = {2021},
  language  = {en}
}
@article{ElferingAnnasJantzenetal.2021,
  author    = {Elfering, Michael and Annas, Sven and Jantzen, Hans-Arno and Janoske, Uwe},
  title     = {Method for time-of-flight estimation of low frequency acoustic signals in reverberant and noisy environment with sparse impulse response},
  series = {Meas. Sci. Technol. (Measurement Science and Technology)},
  journal   = {Meas. Sci. Technol. (Measurement Science and Technology)},
  doi       = {10.1088/1361-6501/ac42e5},
  url       = {http://nbn-resolving.de/urn:nbn:de:hbz:836-opus-143695},
  year      = {2021},
  language  = {en}
}
@inproceedings{EppleFritscheReinkeretal.2019,
  author    = {Epple, Philipp and Fritsche, Manuel and Reinker, Felix and aus der Wiesche, Stefan},
  title     = {Numerical Verification of the Thermodynamic Determination of the Hydraulic Efficiency of Radial Fans},
  series = {Proceedings ASME 2019 International Mechanical Engineering Congress and Exposition, November 11-14, 2019, Salt Lake City, Utah, USA, IMECE2019-11417, V007T08A060; 7 pages},
  booktitle = {Proceedings ASME 2019 International Mechanical Engineering Congress and Exposition, November 11-14, 2019, Salt Lake City, Utah, USA, IMECE2019-11417, V007T08A060; 7 pages},
  year      = {2019},
  language  = {en}
}
@misc{FlinkertAnnasJantzenetal.2019,
  author    = {Flinkert, Tobias and Annas, Sven and Jantzen, Hans-Arno and Janoschke, U.},
  title     = {Vorteile der Modellierung von Mischvorg{\"a}ngen mittels partikelbasierter Simulationsmethoden},
  year      = {2019},
  language  = {de}
}
@article{FrinklBardasWeycketal.2010,
  author    = {Frinkl, Claus-Martin and Bardas, Ufuk and Weyck, Alexander and aus der Wiesche, Stefan},
  title     = {Experimental study of the convective heat transfer from a rotating disc subjected to forced air streams},
  series = {International Journal of Thermal Science},
  journal   = {International Journal of Thermal Science},
  pages     = {73 -- 80},
  year      = {2010},
  language  = {en}
}
@inproceedings{FritscheEppleHasselmannetal.2019,
  author    = {Fritsche, Manuel and Epple, Philipp and Hasselmann, Karsten and Reinker, Felix and Wagner, Robert and aus der Wiesche, Stefan and Russwurm, Hans J{\"o}rg},
  title     = {CFD-Simulation of Centrifugal Fan Performance Characteristics Using Ideal and Real Gas Models for Air and Organic Fluids},
  series = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28-August 1, 2019, San Francisco, California, USA, AJKFluids2019-4815, V03AT03A020; 7 pages},
  booktitle = {Proceedings ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28-August 1, 2019, San Francisco, California, USA, AJKFluids2019-4815, V03AT03A020; 7 pages},
  year      = {2019},
  language  = {en}
}
@misc{GrimmThiemannUhkoetteretal.2010,
  author    = {Grimm, Moritz and Thiemann, Thobias and Uhk{\"o}tter, Stephan and aus der Wiesche, Stefan},
  title     = {Direkte numerische Simulation der Filmstr{\"o}mung in hochtourigen Turbinengleitlagern unter Ber{\"u}cksichtigung von Kavitationsph{\"a}nomenen, Jahrestreffen der ProcessNet-Fachaussch{\"u}sse Computational Fluid Dynamics und W{\"a}rme- und Stoff{\"u}bertragung, Hamburg},
  year      = {2010},
  language  = {de}
}
@book{Goellmann2017,
  author    = {G{\"o}llmann, Laurenz},
  title     = {Lineare Algebra - im algebraischen Kontext},
  publisher = {Springer Spektrum},
  isbn      = {978-3-662-54342-9},
  pages     = {570},
  year      = {2017},
  language  = {de}
}
@book{Goellmann2020,
  author    = {G{\"o}llmann, Laurenz},
  title     = {Lineare Algebra - im algebraischen Kontext, 2. erweiterte Auflage},
  publisher = {Springer Spektrum},
  address   = {Heidelberg},
  isbn      = {978-3-662-61737-3},
  doi       = {10.1007/978-3-662-61738-0},
  publisher      = {FH M{\"u}nster - University of Applied Sciences},
  pages     = {611},
  year      = {2020},
  language  = {de}
}
@book{GoellmannChristian2019,
  author    = {G{\"o}llmann, Laurenz and Christian, Henig},
  title     = {Arbeitsbuch zur Linearen Algebra - Aufgaben, L{\"o}sungen und Vertiefungen},
  publisher = {Springer Spektrum},
  address   = {Heidelberg},
  isbn      = {978-3-662-58765-2},
  doi       = {10.1007/978-3-662-58766-9},
  publisher      = {FH M{\"u}nster - University of Applied Sciences},
  pages     = {269},
  year      = {2019},
  abstract  = {Dieses Arbeitsbuch enth{\"a}lt zahlreiche Aufgaben großer thematischer Breite und unterschiedlicher Schwierigkeitsgrade - einschließlich vollst{\"a}ndiger und ausf{\"u}hrlicher L{\"o}sungen. Das Buch greift als optimale Erg{\"a}nzung zum Lehrbuch Lineare Algebra im algebraischen Kontext mit derselben Kapitelstruktur die dort genannten Aufgaben auf. Dar{\"u}ber hinaus erg{\"a}nzt es weitere {\"U}bungen - zur Vertiefung oder um in neue Themen einzuf{\"u}hren. Es ist aber auch v{\"o}llig unabh{\"a}ngig vom Lehrbuch nutzbar. Neben Aufgaben zu linearen Gleichungssystemen, deren L{\"o}sungsverfahren und -theorie, Matrizenrechnung und Determinanten finden sich auch {\"U}bungen zur Eigenwerttheorie, Matrixdiagonalisierung und -trigonalisierung, zu Vektorr{\"a}umen und Homomorphismen sowie zu Bilinearformen. Dar{\"u}ber hinaus wird mit Aufgaben zu Markov-Ketten und linearen Differenzialgleichungssystemen die Anwendung der linearen Algebra auf andere Bereiche der Mathematik angesprochen. Ein separates Kapitel mit Minitests dient der schnellen {\"U}berpr{\"u}fung des eigenen Wissens zu besonders zentralen Themen. Viele Aufgaben lassen sich ohne weitere Hilfsmittel l{\"o}sen, w{\"a}hrend andere, vor allem praxisorientierte Problemstellungen, den Einsatz mathematischer Software nahelegen. Daher wird bei diesen Aufgaben der L{\"o}sungsweg durch den Einsatz von MATLAB® erg{\"a}nzt.},
  language  = {de}
}
@book{GoellmannHueblPulhametal.2017,
  author    = {G{\"o}llmann, Laurenz and H{\"u}bl, Reinhold and Pulham, Susan and Ritter, Stefan and Schon, Henning and Sch{\"u}ffler, Karlheinz and Voß, Ursula and Vossen, Georg},
  title     = {Mathematik f{\"u}r Ingenieure: Verstehen, Rechnen, Anwenden},
  volume    = {1},
  publisher = {Springer Vieweg},
  isbn      = {978-3-662-53866-1},
  pages     = {529},
  year      = {2017},
  language  = {de}
}
@book{GoellmannHueblPulhametal.2017,
  author    = {G{\"o}llmann, Laurenz and H{\"u}bl, Reinhold and Pulham, Susan and Ritter, Stefan and Schon, Henning and Sch{\"u}ffler, Karlheinz and Voß, Ursula and Vossen, Georg},
  title     = {Mathematik f{\"u}r Ingenieure: Verstehen, Rechnen, Anwenden},
  volume    = {2},
  publisher = {Springer Vieweg},
  isbn      = {978-3-662-53864-7},
  pages     = {480},
  year      = {2017},
  language  = {de}
}
@article{GoellmannKernMaurer2009,
  author    = {G{\"o}llmann, Laurenz and Kern, Daniela and Maurer, Helmut},
  title     = {Optimal control problems with delays in state and control and mixed control-state constraints"},
  series = {Optimal Control Applications and Methods},
  volume    = {30},
  journal   = {Optimal Control Applications and Methods},
  number    = {4},
  issn      = {1099-1514},
  pages     = {341 -- 365},
  year      = {2009},
  language  = {en}
}
@misc{GoellmannKernMaurer2008,
  author    = {G{\"o}llmann, Laurenz and Kern, Daniela and Maurer, Helmut},
  title     = {Optimal control problems with delays in state and control and mixed control-state constraints" Optimal Control, to appear in Applications and Methods, 2008 L. G{\"o}llmann, D. Kern, H. Maurer, "Theory, Numerics and Applications of Optimal Control Problems with Control and State Delays, Conference "50 Years of Optimal Control", September 2008, Bedlewo, Poland},
  year      = {2008},
  language  = {en}
}
@misc{GoellmannKernMaurer2008,
  author    = {G{\"o}llmann, Laurenz and Kern, Daniela and Maurer, Helmut},
  title     = {Optimal Control of Delay Systems with Constraints, 8th SIAM Conference on Optimization, Mai 10-13, 2008, Boston, Massachusetts USA.},
  year      = {2008},
  language  = {en}
}
@misc{GoellmannKernMaurer2007,
  author    = {G{\"o}llmann, Laurenz and Kern, Daniela and Maurer, Helmut},
  title     = {Optimal Control of Constrained Time-lag Systems Necessary Conditions,Numerical Treatment and Applications for Chemical Engineering, Second Mathematical Programming Society International Conference on Continuous Optimization, ICCOPT II \& MOPTA-07, August 13-16, 2007 McMaster University Hamilton, Ontario, Canada.},
  year      = {2007},
  language  = {en}
}
@misc{GoellmannKernMaurer2007,
  author    = {G{\"o}llmann, Laurenz and Kern, Daniela and Maurer, Helmut},
  title     = {Optimal control of constrained time lag systems: necessary conditions and numerical treatment, 6th International Congress on Industrial and Applied Mathematics, Zurich, Switzerland 16 - 22 July 2007.},
  year      = {2007},
  language  = {en}
}
@misc{GoellmannMaurer2015,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Numerical Case Studies for Optimal Control Problems with Multiple Delays - 17th British-French-German Conference on Optimization, Imperial College London, 15-17 June 2015},
  year      = {2015},
  language  = {en}
}
@article{GoellmannMaurer2014,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Theory and applications of optimal control problems with multiple time-delays},
  series = {Journal of Industrial and Management Optimization - American Institute of Mathematical Sciences},
  volume    = {Vol. 10},
  journal   = {Journal of Industrial and Management Optimization - American Institute of Mathematical Sciences},
  number    = {2},
  issn      = {1547-5816},
  pages     = {413 -- 441},
  year      = {2014},
  language  = {en}
}
@misc{GoellmannMaurer2012,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Multiple Delayed Optimal Control Problems, 12th Viennese Workshop on Optimal Control, Dynamic Games and Nonlinear Dynamics, Technische Universit{\"a}t Wien, May 30th - June 2nd, 2012},
  year      = {2012},
  language  = {en}
}
@misc{GoellmannMaurer2012,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Theory and Applications of Constrained Optimal Control Problems with Delays PART 1 : Mixed Control-State Constraints, ANOC Spring School and Workshop, ENSTA Paris, April 23-27, 2012},
  year      = {2012},
  language  = {en}
}
@misc{GoellmannMaurer2009,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Theory and applications of state-constrained optimal control problems with delays, 9th Belgian-French-German Conference on Optimization, Katholieke Universiteit Leuven, September 14-18, 2009, Leuven, Belgium.},
  year      = {2009},
  language  = {en}
}
@misc{GoellmannMaurer2008,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {On Optimal Control Applications in Biomedicine, SIGOPT 2008, PfalzAkademie Lambrecht, Germany 18 - 21. Feb. 2008.},
  year      = {2008},
  language  = {mul}
}
@misc{GoellmannMaurer1994,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Optimal Control of a Continuous Stirred Chemical Tank Reactor, ECMI 94, 8th Conference of the European Consortium for Mathematics in Industry, 6.-10. September 1994, Kaiserslautern, Germany.},
  year      = {1994},
  language  = {en}
}
@misc{GoellmannMaurer1994,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Direct SQP-Methods for Solving Optimal Control Problems with Delays, 15th International Symposium on Mathematical Programming, 15.-19. August 1994, University of Michigan, Ann Arbor, USA.},
  year      = {1994},
  language  = {en}
}
@article{GoellmannMaurer2018,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Optimal control problems with time delays: Two case studies in biomedicine},
  series = {Mathematical Biosciences \& Engineering},
  volume    = {15},
  journal   = {Mathematical Biosciences \& Engineering},
  number    = {5},
  issn      = {1551-0018},
  doi       = {10.3934/mbe.2018051},
  pages     = {1137 -- 1154},
  year      = {2018},
  language  = {en}
}
@misc{GoellmannMaurer2013,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Case Studies of Optimal Control Problems with Delays, 16th French-German-Polish Conference on Optimization, Krakow, September 23-27, 2013},
  year      = {2013},
  language  = {en}
}
@misc{GoellmannMaurer2012,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Combination Therapy Considered as a Multiple Delayed Optimal Control Problem, 21st International Symposium on Mathematical Programming - ISMP 2012, Technische Universit{\"a}t Berlin, Germany, August 19 - 24, 2012},
  year      = {2012},
  language  = {mul}
}
@misc{GoellmannMaurer2018,
  author    = {G{\"o}llmann, Laurenz and Maurer, Helmut},
  title     = {Optimal Control Problems with Time Delays - Necessary Conditions, Numerical Treatment and Case Studies in Biomedicine, 14th Viennese Conference on Optimal Control and Dynamic Games, Technische Universit{\"a}t Wien, July 3-6, 2018},
  year      = {2018},
  language  = {en}
}